{"id":"008a5f0f-4aa9-45b8-97da-254975ca9d9c","arxiv_id":"2611.16347","paper_version":1,"verdict":"ACCEPT","confidence":"HIGH","novelty_score":6.0,"correctness_risk":"medium","formal_verification":"none","parameter_count":3,"one_line_summary":"A simultaneous SMEFT fit to nine top-quark associated production processes with 33 Wilson coefficients shows no significant deviation from the Standard Model, with the process-based approach providing better sensitivity for most coefficients.","lead":"The ATLAS collaboration performed a simultaneous fit of 33 Wilson coefficients in the Standard Model Effective Field Theory (SMEFT) using top-quark associated production data from 140 fb^{-1} of LHC Run 2 collisions at 13 TeV. The analysis compares two complementary strategies for defining analysis regions: a generic object-counting approach and a more complex process-specific approach, finding no significant deviation from the Standard Model.","discovery_kind":"extension","skeptic_critique":{"model":"deepseek/deepseek-v4-flash","headline":"No significant objection identified","rationale":"The paper is a comprehensive and well-documented analysis. The central claim is supported by the data and the statistical methodology. The reader's weakest assumption is correctly identified and is acknowledged by the authors. The analysis includes a study of coverage properties for a subset of operators, which addresses the potential issue of non-standard likelihood behaviour. The comparison of the two analysis strategies is insightful. The paper meets the standards for acceptance.","tokens_in":73951,"tokens_out":344,"duration_ms":7856,"concrete_test":"Verify that the coverage properties of the confidence intervals for the Wilson coefficients, as studied in Section 9.7 for a subset of operators, are representative for all 33 coefficients in the multi-operator fit. This could be done by performing a simplified toy study for a few additional operators with different dominant contributions (linear vs. quadratic) to confirm that the asymptotic approximation remains valid.","verdict_should_be":"UNCHANGED","load_bearing_attack":"The paper presents a thorough and well-executed SMEFT analysis. The central claim that no significant deviation from the Standard Model is observed is robustly supported by the data and the statistical analysis. The weakest assumption identified by the reader—that LO EFT parameterisation with NLO/LO K-factors accurately captures detector-level dependence—is acknowledged by the authors in Section 3.1, and they discuss its potential impact, particularly for the ttHH process. The analysis is transparent about its limitations, and the results are consistent with the Standard Model. No additional load-bearing concern beyond those already acknowledged by the authors is identified.","agreement_with_reader":"agree"},"referee_report":{"model":"deepseek/deepseek-v4-flash","summary":"The paper presents a simultaneous SMEFT interpretation of nine top-quark associated production processes using 140 fb^{-1} of ATLAS Run 2 data. Two analysis strategies are compared: an object-based (OB) approach using generic event categorisation and a process-based (PB) approach using optimised regions from dedicated measurements. A simultaneous fit of 33 dimension-six Wilson coefficients is performed, and no significant deviation from the Standard Model is observed. 95% confidence intervals are placed on all coefficients. The PB approach generally provides better sensitivity for most operators, though the OB approach performs comparably for top-lepton operators.","tokens_in":74159,"tokens_out":1629,"duration_ms":146980,"significance":"This is the first ATLAS simultaneous SMEFT interpretation across such a broad set of top+X processes, significantly extending the scope of previous CMS work. The direct comparison of two analysis strategies (object-based vs. process-based) provides valuable guidance for future global EFT combinations. The inclusion of complex Wilson coefficients and the coherent treatment of detector-level EFT effects across processes are notable strengths. The results are consistent with the Standard Model and provide competitive constraints on 33 Wilson coefficients. The methodology and the comparison framework will be important for Run 3 and HL-LHC analyses.","major_comments":[{"comment":"The scaling approach in Eq. (3) uses NLO/LO K-factors to scale the LO EFT parameterisation. The authors acknowledge in §3.1 that for some operators and processes the higher-order corrections for the EFT operator dependence differ from those for the SM, and no correction is applied. This is a potentially significant systematic uncertainty that is not fully quantified. The authors mention a study for ttbar ttbar showing 20-30% worse limits on four-heavy-quark operators, but this is only one process. A more systematic assessment of the impact of this approximation across all relevant operators and processes would strengthen the analysis. The authors should either provide a quantitative estimate of the uncertainty introduced by this approximation or explicitly state why it is expected to be subdominant for the majority of operators.","section":"§3.1, Eq. (3)","authors_acknowledge":"For some operators and top+X processes the higher order corrections for the EFT operator dependence are different than those for the SM [61–63].","authors_acknowledge_p":0.88},{"comment":"The authors correctly note that when quadratic dimension-six contributions dominate, Wilks' theorem may break down and coverage may differ from asymptotic expectations. They provide toy-based coverage checks for a few representative WCs (Figure 18) and state that asymptotic intervals are typically close to correct and somewhat conservative. However, they also state that due to the complexity of the 33-dimensional fit it is unfeasible to run pseudodata for the multi-operator results. This is a limitation that should be more prominently discussed. The authors should clarify whether the coverage checks for the single-operator scans are representative of the multi-operator case, and whether there is any reason to expect the asymptotic approximation to be less reliable for certain operators or regions of parameter space.","section":"§9.7, Coverage properties","authors_acknowledge":"Due to the complexity of the 33-dimensional fit it is unfeasible to run pseudodata for the multi-operator results, but a general appreciation for the size of the coverage corrections can be obtained from Figure 18.","authors_acknowledge_p":0.89},{"comment":"Several Wilson coefficients show disconnected 95% confidence intervals (e.g., cHt, Re(ctH), Im(ctH) in both OB and PB fits). The authors explain some of these features in the text, but the presentation in Tables 10-11 could be clearer. For example, the notation 'No upper limit' for Im(ctH) in the OB fit and 'No upper limit' for Re(ctH) in the PB fit should be explicitly noted as cases where the 95% CI is unbounded. The authors should also discuss whether these disconnected intervals are physical (e.g., due to quadratic dominance) or an artefact of the scan range or parameterisation.","section":"§9.4, Tables 10-11","authors_acknowledge":null,"authors_acknowledge_p":null},{"comment":"The comparison between OB and PB approaches is a central objective, but the interpretation is complicated by the fact that the observed results differ from the expected results due to mild tensions in the data. The authors state that the PB approach is better for 16 of 33 WCs in the observed fit, while the expected results show the PB approach superior for most WCs. The authors should provide a clearer quantitative summary of the comparison, perhaps with a table or figure showing the ratio of 95% CI widths (PB/OB) for both expected and observed results. This would help readers assess the relative performance more directly.","section":"§9.5, Comparison of approaches","authors_acknowledge":null,"authors_acknowledge_p":null}],"minor_comments":[{"comment":"The sentence 'The result presented here is the first of its kind for ATLAS and significantly extends the scope of Ref. [25]' could be more precise. The authors should specify what aspects are extended (e.g., number of processes, inclusion of complex WCs, comparison of strategies).","section":"§1, Introduction","authors_acknowledge":null,"authors_acknowledge_p":null},{"comment":"The table uses grey text for operators used in linear combinations. This may be difficult to read in print. Consider using a different formatting convention (e.g., footnotes or separate rows).","section":"§3.1, Table 2","authors_acknowledge":null,"authors_acknowledge_p":null},{"comment":"The sentence 'In the result presented here, two general changes to the regions established in previous works have are made' contains a grammatical error ('have are').","section":"§3.3","authors_acknowledge":null,"authors_acknowledge_p":null},{"comment":"The description of the prioritisation procedure for overlapping PB regions is somewhat complex. A flowchart or schematic diagram would help readers understand the assignment logic more easily.","section":"§6.2","authors_acknowledge":null,"authors_acknowledge_p":null},{"comment":"The top panel showing expected sensitivity contributions from different processes is informative but the colour scheme makes it difficult to distinguish some processes. Consider using a more distinct colour palette or adding labels directly on the bars.","section":"§9.4, Figure 14","authors_acknowledge":null,"authors_acknowledge_p":null},{"comment":"The 2D contour plots are dense. Consider adding a legend that explicitly states which line style corresponds to which approach (OB vs. PB) and which confidence level (68% vs. 95%) directly on the figure, rather than relying solely on the caption.","section":"§9.6, Figure 16","authors_acknowledge":null,"authors_acknowledge_p":null},{"comment":"The region definition tables (Tables 12-25) are comprehensive but would benefit from a brief explanatory note for each variable used (e.g., what 'NN P(ttZ)_ttZ' means). Some variables are defined in the text but a quick-reference glossary in the appendix would improve readability.","section":"Appendix C","authors_acknowledge":null,"authors_acknowledge_p":null},{"comment":"The paper is generally well-written and the analysis is thorough. The level of detail in the appendices is appropriate for a JHEP publication.","section":"General","authors_acknowledge":null,"authors_acknowledge_p":null}],"recommendation":"major_revision"},"author_rebuttal":null,"desk_editor":{"model":"deepseek/deepseek-v4-flash","letter":"This is a thorough, well-executed ATLAS paper that does exactly what it says on the tin: a simultaneous SMEFT fit to 33 Wilson coefficients using nine top+X processes with 140 fb^{-1} of Run 2 data. The main result—no significant deviation from the SM—is robust and unsurprising. The real value is the systematic comparison of the object-based (OB) and process-based (PB) analysis strategies. That comparison is new and genuinely useful for designing future global EFT combinations, especially as we move into Run 3 and HL-LHC.\n\nThe paper is honest about its limitations. The most important one is stated in Section 3.1: the EFT parameterisation relies on LO MC samples with reweighting, scaled by NLO/LO K-factors, and the authors explicitly note that for some operators and processes the higher-order corrections for the EFT operator dependence differ from those for the SM, and no correction is applied. They studied the impact for the four-heavy-quark operators on tt̄tt̄ and found 20-30% worse expected limits. That is a real caveat, but they flag it clearly. The reader's weakest assumption is exactly this point, and the paper already acknowledges it.\n\nThe statistical methodology is standard (profile likelihood, TRExFitter) and the systematic uncertainties are extensively catalogued. The coverage checks in Section 9.7 are a nice touch, showing that the asymptotic intervals are generally conservative for the cases tested.\n\nSoft spots: (1) The LO EFT parameterisation is a genuine limitation, especially for operators where the quadratic contribution dominates. The authors acknowledge it but do not quantify it for all operators. (2) The PB approach shows some mild tensions (e.g., tt̄W normalisation 60% above SM, tt̄tt̄ 20% above) that are consistent with earlier dedicated measurements but dilute the expected sensitivity advantage of PB over OB in the observed results. This is not a flaw—it is honest reporting—but it means the comparison is less clean than one might hope. (3) The paper is long (77 pages) and dense; the key methodological insights could be more crisply extracted.\n\nWho this is for: SMEFT practitioners, top quark physicists, and anyone designing future LHC combinations. It deserves a serious referee. The paper is solid, the limitations are transparent, and the methodology comparison is a genuine contribution.\n\nRecommendation: Accept after minor revision. The authors should be asked to provide a more quantitative estimate of the impact of the LO EFT parameterisation assumption across all operators, not just the one case they studied. Otherwise the paper is ready.","headline":"Solid ATLAS SMEFT combination across nine top+X processes; the methodology comparison is the real novelty, and the paper is honest about its LO EFT parameterisation limitation.","tokens_in":74642,"tokens_out":637,"duration_ms":8994},"pith_extraction":null,"created_at":"2026-11-13T06:52:47.103896+00:00","model_set":{"reader":"deepseek/deepseek-v4-flash"},"pipeline_version":"pith-pipeline@v1.4.1-daily-deepseek-or-medium","input_kind":null,"input_chars":null,"input_total_chars":null,"passes_missing":null,"published_standing":null,"published_confidence":null,"objection_audit":null,"run_record":null,"basis":{"kind":"not_recorded","source":null,"chars_given":null,"chars_total":null},"receipt":null,"falsifier":null,"supporting_citations":[],"lane_accuracy":{"status":"not yet measured","lane":{"model":"deepseek/deepseek-v4-flash","input_kind":null},"url":"https://pith.science/accuracy"},"review_version":1}