{"as_of":"2026-08-16T21:03:00Z","caps":{"database_statements":6,"inbound":100,"outbound":100},"context_digest":"sha256:c3e42203f2d9a3b9c409bbafc9bcd439f851054b0faae0336141381f97f85992","coverage":[{"denominator":22,"lane":"reference_resolution","note":"Typed states for the displayed outbound observations.","records_observed":22,"source":"paper_references, paper_reference_links","source_observed_at":"2026-08-14T12:47:51.448010Z","state":"measured"},{"denominator":22,"lane":"standing_notices","note":"One-hop event checks from named stored sources.","records_observed":22,"source":"scholarly_work_events, retraction_status_cache","source_observed_at":"2026-08-16T06:30:59.297886+00:00","state":"measured"},{"denominator":0,"lane":"inbound_itemization","note":"Pith citing papers itemized under the disclosed page cap.","records_observed":0,"source":"paper_references, paper_reference_links","source_observed_at":null,"state":"measured"},{"denominator":1,"lane":"external_citation_measurements","note":"A source-named dated measurement, never combined with another source.","records_observed":0,"source":"cited_works","source_observed_at":null,"state":"measured"}],"external_citation_measurements":[],"inbound":[],"links":{"evidence":"/evidence","html":"/paper/1908.07452/citation-record","integrity":"/paper/1908.07452/integrity","json":"/paper/1908.07452/citation-record.json","paper":"/paper/1908.07452"},"outbound":[{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.711338Z","title":"A novel type of skeleton for polygons","venue":null,"work_id":"a92d2401-8c7f-45e5-b119-e515e618999e","year":1995},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":1,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.369659Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:cdf7ebceb55099bd39664b4502c6289e679126d7208f708bf3e1a8b91dbf7a2b","observation_id":"cbcfb66b-dbe4-4133-8cc3-a96dc231d24f","resolution":{"observed_at":"2026-08-14T12:47:51.714898Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.700037Z","title":"Three-dimensional straight skeletons from bisector graphs","venue":null,"work_id":"2c52b7b2-4bcb-4651-b872-79ecd7b0bd66","year":2013},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":2,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.374106Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:9376904957653ff29dd2b0366e92ae812f316921e7f30bdf0253fe0eec4a79a8","observation_id":"2f6a8780-35b5-4097-82d8-3c8548be9e80","resolution":{"observed_at":"2026-08-14T12:47:51.703771Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.689381Z","title":"Straight skeletons and mitered offsets of nonconvex polytopes","venue":null,"work_id":"39ea697a-1404-4245-b35a-f59773bdcd59","year":2016},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":3,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.377689Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:e2fef78d7e7f4f885f5cbe30327dd5ce73be443f926e8e6a6a2678bbb6ec2091","observation_id":"9e2d5791-652b-4dd3-bc4e-e86be239ac77","resolution":{"observed_at":"2026-08-14T12:47:51.693067Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.678170Z","title":null,"venue":null,"work_id":"efd56e3f-de9d-418c-aa5a-84b5d9e6d03a","year":1977},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":4,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.381373Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:f887ec9767bd92943a42a35d0cfa120cc5adf016ba532ba9aeeb26fcf5bd38b2","observation_id":"6346d624-ced2-467e-bc0c-7e2bfcfef80b","resolution":{"observed_at":"2026-08-14T12:47:51.682323Z","resolver_source":"raw_fallback","status":"unresolved"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.666936Z","title":"Parameterized complexity of even/odd subgraph problems","venue":null,"work_id":"bce3212c-ad7e-433e-afda-1d626fe82e4e","year":2011},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":5,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.385632Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:79c7931cb804feff7645a7e1d9685b55c01451054e8e4c8a9afe34a370a4c544","observation_id":"95560b6c-8953-44ca-b1b3-7acf152fb968","resolution":{"observed_at":"2026-08-14T12:47:51.671383Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.655221Z","title":null,"venue":null,"work_id":"fb840fcf-83a0-45eb-9ef2-127fbce44913","year":1988},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":6,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.389531Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:6e532311956c04a852d3505ae95cd1ed0bdeb88cfc9861a493e9e472f794ba6c","observation_id":"fa3994ec-22a3-45ca-aef9-333d15412d7c","resolution":{"observed_at":"2026-08-14T12:47:51.659496Z","resolver_source":"raw_fallback","status":"unresolved"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.644102Z","title":"Catmull and J","venue":null,"work_id":"666323c5-6ad6-4f7c-93da-67d4163a9444","year":1978},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":7,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.393452Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:98c672b716d9199b1ed9ae3ef8ce2e709e40924dd83cb5ee3829278ef618ffb3","observation_id":"cc113753-62b7-4422-bd58-839aa26ae0c1","resolution":{"observed_at":"2026-08-14T12:47:51.648065Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.633031Z","title":"A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures","venue":null,"work_id":"8e0bcd1c-9b24-4653-9b7e-724de0ad676c","year":2015},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":8,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.396911Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:802d49e630dd4e4f4fa298bc43fab2a55ebdb2bf13adf821f96d8595a5f0344d","observation_id":"f52ae482-0a73-4a2f-b89d-b6857c97741c","resolution":{"observed_at":"2026-08-14T12:47:51.636971Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.621417Z","title":"Doo and M","venue":null,"work_id":"c3cb48df-b3b8-4bd3-a442-22eb75c2e940","year":1978},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":9,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.400447Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:c5e43c1298b2332745085bb9aff20f70b4d98b1c00a07a13d7c17e38448322c0","observation_id":"095082cb-febb-44a4-a1c8-1a7434e149c9","resolution":{"observed_at":"2026-08-14T12:47:51.625866Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.609197Z","title":"Path optimization along lattices in additive manufacturing using the Chinese postman problem.3D Printing and Additive Manufacturing, 4(2):98– 104, 2017","venue":null,"work_id":"b0b24acd-f376-45e3-81b3-8b8d5e6e8b62","year":2017},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":10,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.403701Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:9d37ee73556d274726dee47683ce94e9a85d20a7e3b2d4a68a68cd40679062a3","observation_id":"60af739e-7f96-4295-a6c2-0453845dfc2c","resolution":{"observed_at":"2026-08-14T12:47:51.613587Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":null,"pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.407298Z","title":"A survey on coverage path planning for robotics","venue":null,"work_id":null,"year":2013},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":11,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.407298Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:000e0749c47029ed8714b935a30f924495cd23c5ececec88a7488cb0ce2cd097","observation_id":"b0226037-2370-4c7d-ab4b-3207096752a8","resolution":{"observed_at":"2026-08-14T12:47:51.407298Z","resolver_source":null,"status":"unresolved"},"standing_notice":{"events":[],"reason":"canonical_work_link_unavailable","source_receipts":[],"state":"unavailable"}},{"citation":{"cited_paper":{"arxiv_id":"1812.02412","last_updated":"2021-04-27T02:44:19Z","snapshot_observed_at":"2026-08-14T17:47:39.351130Z","submitted_at":"2018-12-06T09:21:44Z","title":"Euler Transformation of Polyhedral Complexes","version":3},"cited_work":{"arxiv_id":"1812.02412","doi":null,"metadata_source":"pith","pith_arxiv_id":"1812.02412","snapshot_observed_at":"2026-08-14T12:47:51.495324Z","title":"Euler Transformation of Polyhedral Complexes","venue":"cs.CG","work_id":"64368677-bfcf-4c5c-bb1c-c052f04724b1","year":2018},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":12,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.411130Z"},"links":{"cited_paper":"/paper/1812.02412","citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:0b61858d1dee25ec0eadb45fd6266650684061c9d77d316628e47e81293a9398","observation_id":"6de344ae-d66f-4407-991f-e0bfcc3cbd0a","resolution":{"observed_at":"2026-08-14T12:47:51.500396Z","resolver_source":"local_arxiv","status":"verified_exact"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":null,"pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.415364Z","title":"Algebraic Topology","venue":null,"work_id":null,"year":2002},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":13,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.415364Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:f4d8d8f9ab53477cfa0e5c2cfa2d761b1a71e331823febc34a70cbdf448c2160","observation_id":"5ff95129-5698-4ddc-b05b-32ea3395dace","resolution":{"observed_at":"2026-08-14T12:47:51.415364Z","resolver_source":null,"status":"unresolved"},"standing_notice":{"events":[],"reason":"canonical_work_link_unavailable","source_receipts":[],"state":"unavailable"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.584069Z","title":"Ueber die M ¨oglichkeit, einen Linienzug ohne Wiederholung und ohne Unterbrechung zu umfahren","venue":null,"work_id":"ca2e9145-2778-4461-804c-9beab7b339fe","year":null},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":14,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.418732Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:46d1745d31560765ee9864a652a1add769e84871f877c7e749e36f20e154ec89","observation_id":"ad7df5e1-4c48-4543-a339-6ca5743d53f9","resolution":{"observed_at":"2026-08-14T12:47:51.587886Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.573583Z","title":"A novel path planning methodology for extrusion-based additive manufacturing of thin-walled parts","venue":null,"work_id":"8421d6ac-127a-4608-a9e2-75c695ceb1d8","year":2017},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":15,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.422188Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:ab4c9c0bde6ac73a5cb7ef5a4fead68d9c026f21c8ae270daaad3d30f1c98a4b","observation_id":"7184d132-0962-408c-955c-287b4eeab216","resolution":{"observed_at":"2026-08-14T12:47:51.577595Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.562498Z","title":"A non-retraction path planning ap- proach for extrusion-based additive manufacturing.Robotics and Computer-Integrated Manufacturing, 48:132–144, 2017","venue":null,"work_id":"246b64e2-0afa-4806-9b0f-1acd95e0226d","year":2017},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":16,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.425464Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:cc6dc3e96fd8cec063bc2f8bd86c789fd49bb9137332f8c4e5f2f4c6ad73bbd5","observation_id":"35f04fe9-733f-4760-995c-74564c25e57c","resolution":{"observed_at":"2026-08-14T12:47:51.566746Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":{"arxiv_id":"1906.03027","last_updated":"2019-06-07T11:52:52Z","snapshot_observed_at":"2026-08-14T16:19:17.693590Z","submitted_at":"2019-06-07T11:52:52Z","title":"CrossFill: Foam Structures with Graded Density for Continuous Material Extrusion","version":1},"cited_work":{"arxiv_id":"1906.03027","doi":null,"metadata_source":"pith","pith_arxiv_id":"1906.03027","snapshot_observed_at":"2026-08-14T12:47:51.478600Z","title":"CrossFill: Foam Structures with Graded Density for Continuous Material Extrusion","venue":"cs.CG","work_id":"a5e2a5c9-9e94-40ed-83ed-0f585c08d80d","year":2019},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":17,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.428955Z"},"links":{"cited_paper":"/paper/1906.03027","citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:9067823c87c1e9125ad666950e3a212061abe065c64cafef28b883127ae02a35","observation_id":"31f939b3-2f27-449c-ab9f-78eb66e41de4","resolution":{"observed_at":"2026-08-14T12:47:51.484266Z","resolver_source":"local_arxiv","status":"verified_exact"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.551196Z","title":null,"venue":null,"work_id":"661fcbbe-9be2-4007-8d49-a4eae1649398","year":1984},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":18,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.433025Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:c4613b1d075c44090ad808052b00c8d8d35803ad30050707f90bcc9a341fba5c","observation_id":"2133c070-e94d-4356-b431-4270f8d87d94","resolution":{"observed_at":"2026-08-14T12:47:51.555131Z","resolver_source":"raw_fallback","status":"unresolved"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.539587Z","title":"Infill optimization for additive manu- facturingapproaching bone-like porous structures","venue":null,"work_id":"cabb79ba-d088-4856-a089-77dc9c680a8d","year":2018},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":19,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.436282Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:c040251ef20e87e05801ab3412b9c0cff9d8e8d1757a642f26bcf5e70c6ae302","observation_id":"9583fdb5-bcc6-4fd9-afd4-6e4f8e75badd","resolution":{"observed_at":"2026-08-14T12:47:51.543928Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.529573Z","title":null,"venue":null,"work_id":"7c14c155-ec23-475a-a1e7-16f98b07dcb5","year":2016},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":20,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.439879Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:6dba16638d09266b28bfb2db111cb5584bb407f259a000b9556378493be5026a","observation_id":"879533fa-f995-4962-a00f-aa9116c50f90","resolution":{"observed_at":"2026-08-14T12:47:51.533159Z","resolver_source":"raw_fallback","status":"unresolved"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.518621Z","title":"Graph Planning for Environmental Coverage","venue":null,"work_id":"bc1a2b7f-66ec-47ba-8751-8d210b3bfabd","year":2011},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":21,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.443385Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:5a384f158202ce915a068020a0c21a5d65296ea0b8b18fb0cb6db5cceec88af9","observation_id":"5a96b86f-c168-4e2a-9f8a-d20265a93967","resolution":{"observed_at":"2026-08-14T12:47:51.522753Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}},{"citation":{"cited_paper":null,"cited_work":{"arxiv_id":null,"doi":null,"metadata_source":"raw_reference","pith_arxiv_id":null,"snapshot_observed_at":"2026-08-14T12:47:51.507764Z","title":"Connected Fermat spirals for layered fabrication","venue":null,"work_id":"6ae0ea88-116c-4630-a196-ea17a9f68b90","year":2016},"citing_paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing","version":2},"reference_index":22,"source":"pdf_text","source_observed_at":"2026-08-14T12:47:51.448010Z"},"links":{"citing_paper":"/paper/1908.07452"},"observation_digest":"sha256:31ad6890e9924edabff52ca0be95f16a3aa184be3dfb564a952dead8d1185c9c","observation_id":"0ff42e1f-1dc5-4147-8a0c-672ffca93f73","resolution":{"observed_at":"2026-08-14T12:47:51.511814Z","resolver_source":"raw_fallback","status":"verified_fuzzy"},"standing_notice":{"events":[],"observation":"No event found in the named queried sources as of 2026-08-16T06:30:59.297886+00:00.","reason":null,"source_receipts":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"state":"measured"}}],"paper":{"arxiv_id":"1908.07452","last_updated":"2020-05-25T00:25:41Z","latest_version":2,"primary_category":"cs.CG","snapshot_observed_at":"2026-08-14T12:38:39.085801Z","submitted_at":"2019-08-19T01:40:35Z","title":"Continuous Toolpath Planning in Additive Manufacturing"},"reference_resolution":{"displayed":22,"state_counts":{"malformed_identifier":0,"metadata_mismatch":0,"parse_uncertain":0,"unresolved":6,"verified_exact":2,"verified_fuzzy":14},"total_outbound_references":22},"refusal":"A citation records a reference. It does not transfer a finding from one paper to another.","schema":"pith.paper-citation-record.v1","standing_sources":[{"observed_at":"2026-08-16T06:30:59.297886+00:00","source":"crossref"},{"observed_at":"2026-08-16T06:30:54.164669+00:00","source":"retraction_watch"}],"thesis":"As of 16 August 2026, this Paper Citation Record lists 22 of 22 outbound references and 0 inbound Pith citation observations for arXiv:1908.07452."}