Hardware Aspects, Modularity and Integration of an Event Mode Data Acquisition and Instrument Control for the European Spallation Source (ESS)

The European Spallation Source (ESS) in Lund, Sweden is just entering the construction phase with 3 neutron instruments having started in its design concept phase in 2014. As a collaboration of 17 European countries the majority of hardware devices for neutron instrumentation will be provided in-kind. This presents numerous technical and organisational challenges for the construction and the integration of the instruments into the facility wide infrastructure; notably the EPICS control network with standardised hardware interfaces and the facilities absolute timing system. Additionally the new generation of pulsed source requires a new complexity and flexibility of instrumentation to fully exploit its opportunities. In this contribution we present a strategy for the modularity of the instrument hardware with well-defined standardized functionality and control & data interfaces integrating into EPICS and the facilities timing system. It allows for in-kind contribution of dedicated modules for each instrument (horizontal approach) as well as of whole instruments (vertical approach). Key point of the strategy is the time stamping of all readings from the instruments control electronics extending the event mode data acquisition from neutron events to all metadata. This gives the control software the flexibility necessary to adapt the functionality of the instruments to the demands of each single experiment. We present the advantages of that approach for operation and diagnostics and discuss additional hardware requirements necessary.