UV Detector based on InAlN/GaN-on-Si HEMT Stack with Photo-to-Dark Current Ratio > 107
read the original abstract
We demonstrate an InAlN/GaN-on-Si HEMT based UV detector with photo to dark current ratio > 107. Ti/Al/Ni/Au metal stack was evaporated and rapid thermal annealed for Ohmic contacts to the 2D electron gas (2DEG) at the InAlN/GaN interface while the channel + barrier was recess etched to a depth of 20 nm to pinch-off the 2DEG between Source-Drain pads. Spectral responsivity (SR) of 34 A/W at 367 nm was measured at 5 V in conjunction with very high photo to dark current ratio of > 10^7. The photo to dark current ratio at a fixed bias was found to be decreasing with increase in recess length of the PD. The fabricated devices were found to exhibit a UV-to-visible rejection ratio of >103 with a low dark current < 32 pA at 5 V. Transient measurements showed rise and fall times in the range of 3-4 ms. The gain mechanism was investigated and carrier lifetimes were estimated which matched well with those reported elsewhere.
This paper has not been read by Pith yet.
discussion (0)
Sign in with ORCID, Apple, or X to comment. Anyone can read and Pith papers without signing in.