Low-cost Active Dry-Contact Surface EMG Sensor for Bionic Arms

Surface electromyography (sEMG) is a popular bio-signal used for controlling prostheses and finger gesture recognition mechanisms. Myoelectric prostheses are costly, and most commercially available sEMG acquisition systems are not suitable for real-time gesture recognition. In this paper, a method of acquiring sEMG signals using novel low-cost, active, dry-contact, flexible sensors has been proposed. Since the active sEMG sensor was developed to be used along with a bionic arm, the sensor was tested for its ability to acquire sEMG signals that could be used for real-time classification of five selected gestures. In a study of 4 subjects, the average classification accuracy for real-time gesture classification using the active sEMG sensor system was 85%. The common-mode rejection ratio of the sensor was measured to 59 dB, and thus the sensor's performance was not substantially limited by its active circuitry. The proposed sensors can be interfaced with a variety of amplifiers to perform fully wearable sEMG acquisition. This satisfies the need for a low-cost sEMG acquisition system for prostheses.