X-point and divertor filament dynamics from Gas Puff Imaging on TCV

A new Gas Puff Imaging (GPI) diagnostic has been installed on the TCV tokamak, providing two-dimensional insights into Scrape-Off-Layer (SOL) turbulence dynamics above, at and below the magnetic X-point. A detailed study in L-mode, attached, lower single-null discharges shows that statistical properties have little poloidal variations, while vast differences are present in the 2D behaviour of intermittent filaments. Strongly elongated filaments, just above the X-point and in the divertor far-SOL, show a good consistency in shape and dynamics with field-line tracing from filaments at the outboard midplane, highlighting their connection. In the near-SOL of the outer divertor leg, shortlived, high frequency and more circular (diameter $\sim$15 sound Larmour radii) filaments are observed. These divertor-localised filaments appear born radially at the position of maximum density and display a radially outward motion with velocity $\approx$400\,m/s that is comparable to radial velocities of upstream-connected filaments. Conversely, in these discharges ($B\times\nabla B$ pointing away from the divertor), these divertor filaments' poloidal velocities differ strongly from those of upstream-connected filaments. The importance of divertor-localised filaments upon radial transport and profile broadening is explored using filament statistics and in-situ kinetic profile measurements along the divertor leg. This provides evidence that these filaments contribute significantly to electron density profile broadening in the divertor.