Pith. sign in

REVIEW

Laboratory and beam-test performance study of a 55$~\mu$m pitch iLGAD sensor bonded to a Timepix3 readout chip

Not yet reviewed by Pith; the record is open.

This paper has not been read by Pith yet. Machine review is queued; the pith claim, tier, and objections will appear here once it completes.

SPECIMEN: schema-true, not a live event

T0 review · schema-true

One-sentence machine reading of the paper's core claim.

pith:XXXXXXXX · record.json · timestamp

arxiv 2409.20194 v2 pith:TAUFHX7R submitted 2024-09-30 physics.ins-det

classification physics.ins-det
keywords beamgaingoodilgadperformancex-rayareabonded
verification ladder T0 review T1 audit T2 compute T3 formal
0 comments
abstract

This contribution reports on characterisation results of a large-area (2$~\mathrm{cm}^2$) small pitch (55$~\mu$m) inverse Low-Gain Avalanche Detector (iLGAD), bonded to a Timepix3 readout chip. The ilGAD sensors were produced by Micron Semiconductor Ltd with the goal to obtain good gain uniformity and maximise the fill-factor -- an issue present with standard small-pitch LGAD designs. We have conducted detailed performance evaluations using both X-ray calibrations and beam tests. An X-ray fluorescence setup has been used to obtain energy calibration and to identify the optimal operating settings of the new devices, whereas the extensive beam tests allowed for a detailed evaluation of the detector performance. The beam-tests were performed at the CERN SPS North Area H6 beamline, using a 120 GeV/c pion beam. The reference tracking and time-stamping is achieved by a Timepix3-based beam telescope setup. The results show a gain of around 5 with very good uniformity, measured across the whole gain area, as well as a hit time resolution down to 1.3 ns without correcting for the time-walk effects. Furthermore, it is shown that the gain opens the possibility of a good X-ray energy resolution down to 4.5 keV.

Discussion (0). Continue with ORCID to comment.

Pith tools