REVIEW 5 major objections 5 minor 61 references
Effects of coupling range on the dynamics of swarmalators
T0 review · 5 major / 5 minor · reviewed 2026-08-12 · deepseek-v4-flash
Pith's one-line read Tightening the coupling range in a one-dimensional swarmalator model produces several new collective states, and most of their stability boundaries are derived exactly.
desk verdict Solid extension of the 1D swarmalator model with real analytic results for p=2, but the captions overstate the analytic coverage of the q-wave boundaries for general p. read the letter →
The pith
A machine-rendered reading of the paper's core claim, the machinery that carries it, and where it could break.
The reading
What carries the argument
The central object is the tunable coupling kernel G(x) = ((1 + cos x)/2)^p, a smooth pulse whose width shrinks as p grows, so larger p corresponds to a smaller interaction range. Because this kernel has only finitely many Fourier harmonics (the largest being p), the governing equations close in a finite set of generalized Kuramoto and 'rainbow' order parameters (Q_n, R_n, W_{n±}), which makes linear stability calculations tractable. The paper uses those order parameters to write the equations of motion, evaluate Jacobians at the relevant fixed points, and read off stability regions in the (J, K) plane.
What would settle it
Compute the full Jacobian spectrum for the q = 3 wave (θ = ±3x + C) at p = 2, or for q > 1 at p = 3, and compare its marginal-stability curve in the (J, K) plane with the numerically inferred boundary shown in the paper's bifurcation diagrams; if the curve does not coincide with the sync-dot and async bifurcation lines, the paper's assumption that numerics correctly give the q-wave stability region is falsified.
Extended reading notes
Core claim
The central claim is that tuning the coupling range p in the 1D swarmalator model (via the kernel G(x) = ((1 + cos x)/2)^p) changes the phase diagram in a systematic, partly exact way. For p = 2 the paper proves that the async state is linearly stable when 3J + K < 0 and K < 0, that sync dots are stable for J > 0, K > 0 (with k = 1, 2, 3 dots all in the same region), that the sync wave is stable for J < 0, K > 0, and that the 1-wave and 2-wave are stable in regions bounded by J + K > 0, J + 5K > 0 and by 13J + 7K > 0, K < 0, respectively. The maximum winding number of the new states is set by the highest harmonic of the kernel, n_max = p, so lowering the range (larger p) produces q-waves and k-dots with larger q and k, while no qualitatively new states appear beyond p = 2. The paper concludes with a (K, p) phase diagram for J = ±1 whose q-wave boundaries are determined by numerics rather than analysis.
Load-bearing premise
For general p, the stability boundaries of the q-wave states are not derived; the paper assumes that, as in the p = 2 case, q-waves bifurcate from the sync dots and async states, so the (K, p) phase diagrams mark numerical observation as an analytic boundary.
Editorial extensions
If this is right
- For p = 2, the analytically derived boundaries in the (J, K) plane predict exactly where the async state, the 1-, 2-, and 3-waves, the sync wave, and the sync dots are stable, including the bistability regions where the 1-wave coexists with the sync wave or the 2-wave.
- For general p, the async state's stability condition becomes (p+1)J + K < 0 and K < 0, so increasing the coupling range (decreasing p) shrinks the async region.
- The largest accessible winding number for q-waves and the number of sync dots grow with p, because q_max is controlled by the kernel's highest harmonic p.
- The new states (sync dots with k ≥ 3, sync wave, q-waves with q > 1, and the active state) do not exist in the baseline p = 0 model, so they are direct consequences of finite coupling range.
- The paper predicts these states may be observable in 1D swarming biological systems such as vinegar eels, where metachronal waves resembling q-waves have already been reported.
Reading between the lines
- If the q-wave stability regions continue to be set by bifurcations from sync dots and async states for all p, then a full analytic phase diagram for any p requires only the stability analysis of those two simpler states plus the q-wave existence condition; this is a testable structural conjecture the paper leaves implicit.
- A natural next step would be to replace the cosine-power kernel with a different compact-support kernel (for instance a box function) and check whether the same states and the same scaling of q_max with range persist, which would show whether the results are kernel-independent or an artifact of the finite-harmonic structure.
- Because the kernel's finite harmonic content is what makes the analysis tractable, the same order-parameter closure technique could be applied to other finite-harmonic kernels in coupled oscillator networks, suggesting a broader class of analytically tractable range-dependent models.
Editorial analysis
A structured set of objections, weighed in public.
Referee Report
Summary. This paper studies a one-dimensional swarmalator model with a tunable coupling-range kernel G(x)=((1+cos x)/2)^p, recovering the original model at p=0. For fixed p=2 it reports new collective states for short-range coupling: sync dots with k>=3, a fully phase-synchronized sync wave, q-waves with winding number q>1, and an active state. It presents linear-stability calculations for the async state, sync dots, sync wave, 1-wave, and 2-wave, and compares these with numerical phase diagrams. For variable p it derives async and sync-wave stability conditions, argues that the maximum winding number qmax grows with p, and displays numerical phase diagrams in the (J,K) and (K,p) planes. The stated goal is to provide the first analytic results on coupling range in swarmalator systems.
Significance. If correct, the p=2 results provide a valuable analytic foothold: threshold conditions such as 3J+K<0 for the async state, J>0,K>0 for sync dots, and J<0,K>0 for the sync wave are parameter-free predictions that are checked against independent simulations, and the simulation code is openly available. The paper is also honest about its failures, explicitly acknowledging that the 3-wave and the general-p q-wave stability boundaries are not derived. However, the analytic coverage is narrower than the abstract and the figure captions claim, and several central linear-stability calculations are only sketched or delegated to an unshown notebook. The new-state phenomenology is interesting, and the p=2 analysis is internally consistent with the numerical phase diagram, but the paper's central claim about analytic derivation must be reframed and the missing derivations supplied.
major comments (5)
- [Sec. IV and Figs. 8-9] The captions of Figs. 8 and 9 state 'Boundaries are calculated analytically,' but this overstates what is demonstrated. Section IV explicitly says: 'Unfortunately, we were unable to find the stability here for general p. Numerics however indicate, like the p = 2 case, they bifurcate from the sync dots and async states, and so in that sense we have their stability regions.' Likewise, in Sec. III.A.5 the 3-wave boundary is left to numerics: 'We were unable to perform the stability analysis in this case as the expressions became humongous.' Since q-waves with q>1 are one of the two new state families highlighted in the abstract, the claim to have derived most threshold boundaries should be qualified, and the figures should visually distinguish analytic from numerically inferred boundaries.
- [Sec. IV, qmax argument] There is an inconsistent harmonic-counting argument. The text says 'the largest harmonic nmax in the coupling kernel G(x)... scales linearly with the range nmax = p,' and then immediately argues that a q=5-wave requires S5 to appear in the equations of motion and hence needs p>=4. But Eq. (23)-(24) sum m from 1 to p+1, so the maximum harmonic in the equations of motion is p+1, not p. This is not a cosmetic typo: it determines the stated scaling of qmax for both q-waves and sync dots. Please correct the statement and specify whether qmax=p or qmax=p+1.
- [Sec. III.A.1, Eq. (14)] The sync 3-dot eigenvalues are load-bearing for the sync-dot stability region, but the derivation is not in the manuscript. The text says only that 'The eigenvalues are calculated using a Mathematica notebook that we have provided with the references.' No notebook is included in the arXiv submission, and no derivation outline is given. Please include the notebook as supplemental material or provide the essential algebraic steps in an appendix so that Eq. (14) and the resulting region J>0,K>0 can be checked.
- [Sec. III.A.6 and Eqs. (22), (30)] The async-state stability is the basis for a large part of the phase diagram, but the calculation is presented only as 'After carrying out the analysis and comparing the Fourier modes, we achieve ...' with no intermediate steps. A reader cannot verify the reduction from the three W_{q±} conditions plus the Z1 condition in Eq. (22) to the final condition 3J+K<0, K<0 (or, for general p, from Eq. (28) to Eq. (30)). Please give the full linearization in an appendix, including the coefficient formulas that justify dropping the individual q conditions in favor of the single inequality.
- [Sec. III.A.2 and Sec. IV (sync wave)] The sync-wave stability analysis is asserted through unspecified functions A(N,p) and B(N,p) in Eqs. (15) and (34), with no explicit expressions or derivation. The resulting sign conditions J<0,K>0 are plausible, but because the sync-wave boundary is part of the claimed analytic phase diagram, the manuscript should at least outline how the Jacobian blocks diagonalize and why A and B are positive.
minor comments (5)
- [Eq. (9)] In the last two terms of the theta equation, the angle argument is written as Phi1+ twice; from Eq. (8) and the general form in Eqs. (23)-(24) these should be Phi2+ and Phi3+, respectively.
- [Sec. II, model definition] The sentence 'By going to a suitable frame, we can set omega = nu = 0' should read v = omega = 0; there is no parameter nu in the model.
- [Sec. III.A.5] The statement that the 3-wave 'shares the boundary with the async state' should specify which boundary and should explicitly state that this is a numerical observation rather than an analytic result.
- [Sec. III, active state] The active state is described qualitatively and illustrated in Fig. 3, but no order parameter or quantitative criterion is defined for it. A precise definition (for example, a threshold on the time variance of Sn+ or R1) would make the phase classification reproducible.
- [Figs. 8-9 captions] The phrase 'Boundaries are calculated analytically' should be changed to distinguish the analytically derived boundaries (async, sync dots, sync wave, low-q waves for p=2) from the numerically inferred q-wave boundaries for general p.
Circularity Check
No circular derivation: thresholds are computed from the model by linear stability analysis, with only acknowledged numerical gaps.
full rationale
The analytic results in this paper are not circular. The thresholds for async, sync dots, sync wave, 1-wave, and 2-wave are obtained by direct eigenvalue or perturbation calculations from the stated equations (e.g., Eqs. (11)-(17), (22), (28)-(31)), and no parameter is fitted to the quantity being predicted; the analytic boundaries are then checked against independent simulations (Figs. 4 and 6). The only inputs from the authors' prior work are the baseline 1D model and the rainbow order parameters of Ref. [38], which define the setting and the order-parameter vocabulary but do not by themselves imply any of the new stability boundaries. No uniqueness theorem is imported from the authors' own papers, and no ansatz is smuggled in via citation: the kernel G(x)=((1+cos x)/2)^p is stated in the model and expanded using the standard binomial identity (27). The paper is also explicit about what is not derived: for p=2, the 3-wave is left to numerics ('We were unable to perform the stability analysis in this case as the expressions became humongous. Numerics revealed that the 3-wave shares the boundary with the async state'); and for general p, q-wave stability is left to numerics ('Unfortunately, we were unable to find the stability here for general p. Numerics however indicate, like the p = 2 case, they bifurcate from the sync dots and async states, and so in that sense we have their stability regions'). These passages are acknowledged limitations, not circular reductions; they do mean that the captions of Figs. 8 and 9 saying 'Boundaries are calculated analytically' overstate the analytic coverage for general-p q-waves and for the p=2 3-wave. That is a claim-width/correctness caveat, not a circularity.
Assumptions & free parameters
assumptions (5)
- domain assumption The swarmalator model (Eqs. 1-2) with all-to-all coupling, no noise, and identical kernels in space and phase is the system of interest.
- ad hoc to paper The smooth pulse kernel G(x)=((1+cos x)/2)^p is representative of short-range interactions, with the same G for position and phase.
- standard math Async stability is assessed in the thermodynamic limit from the continuity equation with a small perturbation around uniform density.
- domain assumption q-wave and sync-dot states are fixed points with equally spaced positions and phases, and their stability is decided by linear Jacobian eigenvalues.
- ad hoc to paper States with winding q require the q-th rainbow order parameter S_q to appear in the equations of motion; equivalently qmax is bounded by the kernel's harmonic content.
Cite this review
Pith. "Pith review of Effects of coupling range on the dynamics of swarmalators." pith.science (2026). https://pith.science/paper/IVVSZMT3
@misc{pith2026241114851,
author = {Pith},
title = {Pith review of: Effects of coupling range on the dynamics of swarmalators},
year = {2026},
howpublished = {\url{https://pith.science/paper/IVVSZMT3}},
note = {Machine review of arXiv:2411.14851}
}
read the original abstract
We study a variant of the one-dimensional swarmalator model where the units' interactions have a controllable length scale or range. We tune the model from the long-range regime, which is well studied, into the short-range regime, which is understudied, and find diverse collective states: sync dots, where the swarmalators arrange themselves into k>1 delta points of perfect synchrony, q-waves, where the swarmalators form spatiotemporal waves with winding number q>1, and an active state where unsteady oscillations are found. We present the phase diagram and derive most of the threshold boundaries analytically. These states may be observable in real-world swarmalator systems with low-range coupling such as biological microswimmers or active colloids.
Figures
Figures from the paper (6 more)
Reference graph
Works this paper leans on
-
[1]
Table I shows S1+ = S1− = S2+ = S2− = S3+ = S3− = R1 = 1
Sync dots First we study the stability of the sync dots with a single cluster, i.e., the sync 1-dot. Table I shows S1+ = S1− = S2+ = S2− = S3+ = S3− = R1 = 1. We only look at the order parameters that appear in Eqs. (8)- (9). The positions and phases are all synchronized and we get xi = θi = c, a constant that can be taken as 0 without loss of generality....
-
[2]
Order param- eters takes values R1 = 1, and Sn+ = Sn− = 0 for n = 1 , 2, 3
Sync wave Here the phases are completely synchronized, but the positions are distributed along the ring. Order param- eters takes values R1 = 1, and Sn+ = Sn− = 0 for n = 1 , 2, 3. The state is represented by the fixed point (xi, θi) = ( c1 + 2πi/N, c2). Setting c1, c2 to zero, the calculation of the eigenvalues of the Jacobian M at this fixed point yield...
-
[3]
1-wave 1-wave corresponds to θ = ±x + C, for some constant C (determined by the initial conditions). If we choose the ‘+’ve sign, then order parameters become S1− = 1 and S1+ = S2+ = S2− = S3+ = S3− = R1 = 0 (choice of the ‘−’ sign just alters the values of S1+ and S1− while leaving the analysis unaffected). The fixed point for this state is ( xi, θi) = (...
-
[4]
This corresponds to the fixed points (xi, θi) = (c1 + 2πi/N, c2 + 2∗ 2πi/N)
2-wave Here, we have S2+ = 1 and S1+ = S1− = S2− = S3+ = S3− = R1 = 0. This corresponds to the fixed points (xi, θi) = (c1 + 2πi/N, c2 + 2∗ 2πi/N). We calcu- late the eigenvalues of M λ = 0 1 8 (−2J − K) 1 8 −J ± p J(J + 2K) 1 32 −2J ± p J(4J + 3K) 1 32 −2J − K ± √ 4J 2 + 68J K+ K 2 1 128 −11J − K ± √ 121J 2 + 1174J K+ K 2 1 12...
-
[5]
3-wave Solutions are now of the form θ = ±3x + C. Taking the ‘−’ve sign (without loss of generality), we getS3+ = 1 and S1+ = S1− = S2+ = S2− = S3− = R1 = 0. Fixed point is of the form (xi, θi) = (c1+2πi/N, c2+3∗2πi/N). We were unable to perform the stability analysis in this case as the expressions became humongous. Numerics revealed that the 3-wave shar...
-
[6]
Async state We study the async state in the thermodynamic limit, N → ∞. The density function satisfies the continuity equation ∂ρ ∂t + ∇ ·(vρ) = 0, (18) where ρ(x, θ, t) denotes the probability that a swarmala- tor is at position x with its phase θ at time t, and the velocity v = ( vx, vθ) is the right hand side of Eqs. (8)- (9). Consider a perturbation a...
- [7]
-
[8]
sin m(xj − xi) + (θj − θi) + sin m(xj − xi) − (θj − θi) # , (23) ˙θi = K N NX j=1
Now, 1-wave is bistable with 2-wave (green triangles). In both the cases, the probability of 1-wave is much lesser than the other one. The probability is almost zero at the beginning and only increases asJ or K tends to zero. The other noticeable thing from Fig. 7(b) is that, aroundK = 0, the probabilities do not add up to 1. This indicates the existence ...
Show all 61 references
-
[9]
K. P. O’Keeffe, H. Hong, and S. H. Strogatz, Nature Communications 8, 1504 (2017)
2017
-
[10]
Adorj´ ani, A
B. Adorj´ ani, A. Lib´ al, C. Reichhardt, and C. Reichhardt, 9 Physical Review E 109, 024607 (2024)
2024
-
[11]
Hrabec, V
A. Hrabec, V. Kˇ riˇ z´ akov´ a, S. Pizzini, J. Sampaio, A. Thi- aville, S. Rohart, and J. Vogel, Physical Review Letters 120, 227204 (2018)
2018
-
[12]
Aihara, T
I. Aihara, T. Mizumoto, T. Otsuka, H. Awano, K. Nagira, H. G. Okuno, and K. Aihara, Scientific Reports 4, 3891 (2014)
2014
-
[13]
Riedl, I
M. Riedl, I. Mayer, J. Merrin, M. Sixt, and B. Hof, Na- ture Communications 14, 5633 (2023)
2023
-
[14]
Riedl and F
M. Riedl and F. Romano (2024)
2024
-
[15]
G. K. Sar, S. N. Chowdhury, M. Perc, and D. Ghosh, New Journal of Physics 24, 043004 (2022)
2022
-
[16]
Barcis, M
A. Barcis, M. Barcis, and C. Bettstetter, in 2019 In- ternational Symposium on Multi-Robot and Multi-Agent Systems (MRS) (IEEE, 2019), pp. 98–104
2019
-
[17]
Barcis and C
A. Barcis and C. Bettstetter, IEEE Access 8, 218752 (2020)
2020
-
[18]
S.-Y. Ha, J. Jung, J. Kim, J. Park, and X. Zhang, Kinetic & Related Models 14, 429 (2021)
2021
-
[19]
S.-Y. Ha, J. Jung, J. Kim, J. Park, and X. Zhang, Math- ematical Models and Methods in Applied Sciences 29, 2225 (2019)
2019
-
[20]
Z. Gong, J. Zhou, and M. Huang, International Journal of Bifurcation and Chaos 34, 2450129 (2024)
2024
-
[21]
Degond, A
P. Degond, A. Diez, and A. Walczak, Analysis and Ap- plications 20, 1215 (2022)
2022
-
[22]
N. Blum, A. Li, K. O’Keeffe, and O. Kogan, Physical Review E 109, 014205 (2024)
2024
-
[23]
G. K. Sar, D. Ghosh, and K. O’Keeffe, Physical Review E 107, 024215 (2023)
2023
-
[24]
J. U. Liz´ arraga and M. A. de Aguiar, Physical Review E 108, 024212 (2023)
2023
-
[25]
Schilcher, J
U. Schilcher, J. F. Schmidt, A. Vogell, and C. Bettstet- ter, in 2021 IEEE International Conference on Auto- nomic Computing and Self-Organizing Systems (ACSOS) (IEEE, 2021), pp. 90–99
2021
-
[26]
B. Hao, M. Zhong, and K. O’Keeffe, Physical Review E 108, 064214 (2023)
2023
-
[27]
H. Hong, K. Yeo, and H. K. Lee, Physical Review E 104, 044214 (2021)
2021
-
[28]
O’Keeffe and H
K. O’Keeffe and H. Hong, Physical Review E105, 064208 (2022)
2022
-
[29]
L. D. Smith, SIAM Journal on Applied Dynamical Sys- tems 23, 1133 (2024)
2024
-
[30]
M. S. Anwar, G. K. Sar, M. Perc, and D. Ghosh, Com- munications Physics 7, 59 (2024)
2024
-
[31]
S. J. Kongni, V. Nguefoue, T. Njougouo, P. Louodop, F. F. Ferreira, R. Tchitnga, and H. A. Cerdeira, Physical Review E 108, 034303 (2023)
2023
-
[32]
G. K. Sar, K. O’Keeffe, and D. Ghosh, Chaos: An In- terdisciplinary Journal of Nonlinear Science 33, 111103 (2023)
2023
-
[33]
G. K. Sar, D. Ghosh, and K. O’Keeffe, Physical Review E 109, 044603 (2024)
2024
-
[34]
J. U. Lizarraga and M. A. de Aguiar, Chaos: An In- terdisciplinary Journal of Nonlinear Science 30, 053112 (2020)
2020
-
[35]
M. S. Anwar, D. Ghosh, and K. O’Keeffe, arXiv preprint arXiv:2409.05342 (2024)
2024 arXiv
-
[36]
H. Hong, K. P. O’Keeffe, J. S. Lee, and H. Park, Physical Review Research 5, 023105 (2023)
2023
-
[37]
Degond and A
P. Degond and A. Diez, Acta Applicandae Mathematicae 188, 18 (2023)
2023
-
[38]
Ghosh, S
S. Ghosh, S. Pal, G. K. Sar, and D. Ghosh, Physical Review E 109, 054205 (2024)
2024
-
[39]
S. Yoon, K. O’Keeffe, J. Mendes, and A. Goltsev, Phys- ical Review Letters 129, 208002 (2022)
2022
-
[40]
It has facilitated several exact analyses of swarmalators [18, 20, 23, 38–41]
(it turns it into Kuramoto-like model which means we can use techniques from sync studies to attack it). It has facilitated several exact analyses of swarmalators [18, 20, 23, 38–41]. Here it allows us to analytically de- termine the critical coupling range at which various co...
2024 arXiv
-
[41]
Ghosh, G
S. Ghosh, G. K. Sar, S. Majhi, and D. Ghosh, Physical Review E 108, 034217 (2023)
2023
-
[42]
G. K. Sar and D. Ghosh, Europhysics Letters 139, 53001 (2022)
2022
-
[43]
O’Keeffe and C
K. O’Keeffe and C. Bettstetter, in Micro-and Nanotech- nology Sensors, Systems, and Applications XI (Inter- national Society for Optics and Photonics, 2019), vol. 10982, p. 109822E
2019
-
[44]
H. K. Lee, K. Yeo, and H. Hong, Chaos: An Interdisci- plinary Journal of Nonlinear Science 31, 033134 (2021)
2021
- [45]
-
[46]
O’Keeffe, G
K. O’Keeffe, G. K. Sar, M. S. Anwar, J. U. Liz´ arraga, M. A. de Aguiar, and D. Ghosh, arXiv preprint arXiv:2312.10178 (2023)
2023 arXiv
-
[47]
O’Keeffe, S
K. O’Keeffe, S. Ceron, and K. Petersen, Physical Review E 105, 014211 (2022)
2022
-
[48]
O’Keeffe, arXiv preprint arXiv:2410.02975 (2024)
K. O’Keeffe, arXiv preprint arXiv:2410.02975 (2024)
2024 arXiv
-
[49]
K. P. O’Keeffe, arXiv preprint arXiv:2410.18011 (2024)
2024 arXiv
-
[50]
Kuramoto, in International Symposium on Mathe- matical Problems in Theoretical Physics(Springer Berlin Heidelberg, Berlin, Heidelberg, 1975), pp
Y. Kuramoto, in International Symposium on Mathe- matical Problems in Theoretical Physics(Springer Berlin Heidelberg, Berlin, Heidelberg, 1975), pp. 420–422
1975
-
[51]
Note1, the constant depends on the initial conditions and the same is true for all other such constants that appear in the fixed points
-
[52]
But, in reality, we get either S1− = S2+ = 1 or S1+ = S2− = 1
Note2, note that, in Table I, S1+ = S2+ = 1 as we as- signed the maximum values to the ‘+’ signs there. But, in reality, we get either S1− = S2+ = 1 or S1+ = S2− = 1
-
[53]
Note3, in theory they could be bistable with the sync dots or async state of course, but numerics indicate this is not the case
-
[54]
Quillen, A
A. Quillen, A. Peshkov, E. Wright, and S. McGaffigan, Physical Review E 104, 014412 (2021)
2021
-
[55]
Quillen, A
A. Quillen, A. Peshkov, B. Chakrabarti, N. Skerrett, S. McGaffigan, and R. Zapiach, Physical Review E 106, 064401 (2022)
2022
-
[56]
Ketzetzi, M
S. Ketzetzi, M. Rinaldin, P. Dr¨ oge, J. d. Graaf, and D. J. Kraft, Nature Communications 13, 1 (2022)
2022
-
[57]
Note4, https://github.com/Khev/swarmalators/tree/master/1D/on- ring/local-coupling
-
[58]
the constant depends on the initial conditions and the same is true for all other such constants that appear in the fixed points
-
[59]
But, in reality, we get either S1− = S2+ = 1 or S1+ = S2− = 1
Note that, in Table I, S1+ = S2+ = 1 as we assigned the maximum values to the ‘+’ signs there. But, in reality, we get either S1− = S2+ = 1 or S1+ = S2− = 1
-
[60]
In theory they could be bistable with the sync dots or async state of course, but numerics indicate this is not the case
-
[61]
https://github.com/Khev/swarmalators/tree/master/1D/on- ring/local-coupling
Reviewed August 12, 2026 · model on record in the stance chip above.
Discussion (0). Continue with ORCID to comment.