Power-based control of output oscillations with online estimation of biased harmonics

The recently introduced discrete power-based control (Ruderman (2024b)) reduces largely the communication efforts in the control loop when compensating for the marginally damped or even slowly diverging output oscillations. The control commutates twice per oscillations period (at the amplitude peaks) and uses the measured harmonic output only. The power-based control scheme requires the knowledge of the instantaneous frequency, amplitude, and bias parameters of the harmonic signal. This paper extends the power-based control by the finite-time estimation of the biased harmonics (Ahmed et al. (2022)). Also an improved analytic calculation of the impulse weighting factor is provided. The power-based oscillations control with online estimation of the harmonic parameters is evaluated experimentally on the fifth-order actuator system with a free hanging load under gravity and measurement noise.