Pith. sign in

REVIEW

Water window soft x-ray source enabled by 25-W few-cycle mid-IR OPCPA at 100 kHz

Not yet reviewed by Pith; the record is open.

This paper has not been read by Pith yet. Machine review is queued; the pith claim, tier, and objections will appear here once it completes.

SPECIMEN: schema-true, not a live event

T0 review · schema-true

One-sentence machine reading of the paper's core claim.

pith:XXXXXXXX · record.json · timestamp

arxiv 1910.03236 v1 pith:JPNO7KMR submitted 2019-10-08 physics.optics

classification physics.optics
keywords mid-iropcpapowerrepetitionsourcesgenerationlaserpeak
verification ladder T0 review T1 audit T2 compute T3 formal
0 comments
read the original abstract

Coherent soft x-ray (SXR) sources enable fundamental studies in the important water window spectral region. Until now, such sources have been limited to repetition rates of 1 kHz or less, which limits count rates and signal-to-noise ratio for a variety of experiments. SXR generation at high repetition rate has remained challenging because of the missing high-power mid-infrared (mid-IR) laser sources to drive the high-harmonic generation (HHG) process. Here we present a mid-IR optical parametric chirped pulse amplifier (OPCPA) centered at a wavelength of 2.2 {\mu}m and generating 16.5-fs pulses (2.2 oscillation cycles of the carrier wave) with 25 W of average power and a peak power exceeding 14 GW at 100-kHz pulse repetition rate. This corresponds to the highest reported peak power for high-repetition-rate mid-IR laser systems. The output of this 2.2-{\mu}m OPCPA system was used to generate a SXR continuum extending beyond 0.6 keV through HHG in a high-pressure gas cell.

Discussion (0). Sign in to comment.

Pith tools