Pith. sign in

REVIEW 2 major objections 1 minor 20 references

An overdetermined linear equations-based time calibration method for fast sampling ASICs

T0 review · 2 major / 1 minor · reviewed 2026-05-25 · grok-4.3

Challenge this review Re-run · record.json Download PDF Read on arXiv ↗

Pith's one-line read Overdetermined linear equations recover actual sampling intervals in SCA ASICs from a known input signal period.

desk verdict The paper gives a workable overdetermined-equations calibration for SCA ASIC sampling intervals with a real-hardware test, but supplies no numbers to show the gain over the proportionality method it criticizes. read the letter →

arxiv 1907.02733 v1 pith:N2T43APD submitted 2019-07-05 physics.ins-det

Boyu Cheng , Lei Zhao , Jiajun Qin , Han Chen , Yuxiang Guo , Shubin Liu , Qi An This is my paper · ORCID
classification physics.ins-det
keywords timecalibrationswitchedcapacitorarrayASICsamplingintervaloverdeterminedlinearequationswaveformpulsetiminghighenergyphysics
verification ladder T0 review T1 audit T2 compute T3 formal

The pith

A machine-rendered reading of the paper's core claim, the machinery that carries it, and where it could break.

The reading

The paper presents a calibration technique for waveform-sampling ASICs that use switched-capacitor arrays. Manufacturing variations produce irregular sampling intervals that degrade timing precision in high-energy physics applications. The method forms overdetermined linear equations from the relation between those intervals and a periodic input signal whose period is known, then solves the system for the true interval values. Evaluation against an amplitude-proportionality approach and application to pulse-timing measurements on a custom ASIC indicate the equations yield usable corrections.

What carries the argument

Overdetermined linear equations whose unknowns are the sampling intervals and whose knowns derive from the input signal period.

What would settle it

Independent measurement of the actual sampling intervals, for instance with a calibrated oscilloscope or laser timing reference, that shows large systematic deviation from the values solved by the linear equations.

Watch

Extended reading notes

Core claim

The roots of the overdetermined linear equations established from the relationship between sampling intervals and the known input signal period correspond to the actual sampling intervals, and this calibration is effective when applied to a pulse timing test with the authors' ASIC.

Load-bearing premise

The known signal period supplies a reference that constrains the sampling intervals linearly and accurately enough that noise and circuit imperfections do not dominate the solution.

Editorial extensions

If this is right

  • Actual sampling intervals can be recovered from periodic-signal data without relying on voltage-amplitude proportionality.
  • Time resolution of SCA-based systems improves once the recovered intervals are used to correct the waveform timestamps.
  • The method applies directly to pulse-timing measurements performed with the tested ASIC.
  • Calibration remains possible even when individual cell responses deviate from ideal sawtooth or sine behavior.

Reading between the lines

Editorial extensions of the paper, not claims the author makes directly.

  • The same linear-equation construction could be tested on other SCA or pipeline ADCs that exhibit fixed but unknown cell-to-cell delays.
  • If the equations remain stable under added jitter, the approach might support in-situ recalibration during data taking.
  • Combining the solved intervals with the original amplitude data could yield a joint estimator for both timing and amplitude corrections.
Share X Bluesky LinkedIn Reddit HN

Editorial analysis

A structured set of objections, weighed in public.

Desk editor's note, referee report, simulated authors' rebuttal, and a circularity audit.

Referee Report

2 major / 1 minor

Summary. The manuscript proposes a novel time calibration method for waveform sampling ASICs based on switched capacitor arrays (SCAs). It first evaluates limitations of a popular calibration approach relying on voltage amplitude proportionality to sampling intervals for sawtooth or sine wave inputs. The new method instead uses the known period of an input signal to construct overdetermined linear equations whose solution yields the actual sampling intervals. The authors apply the method to a pulse timing test on an ASIC of their design and conclude that the test results indicate the method is effective for improving time resolution in high energy physics applications.

Significance. If supported by quantitative validation, the approach could offer a calibration technique less dependent on the voltage-sampling proportionality assumption, potentially benefiting timing precision in HEP experiments using SCA ASICs.

major comments (2)
  1. [Abstract] Abstract: the central claim that 'the test results indicate that the new time calibration method is effective' is unsupported by any quantitative results, error analysis, comparison metrics, or performance numbers, which is load-bearing for assessing whether the method recovers intervals accurately.
  2. [Description of the new method] Description of the new method (paragraph following the evaluation of the popular method): the assumption that the relationship between sampling intervals and the known input signal period yields overdetermined linear equations whose solution recovers the intervals without dominant contributions from noise, non-linearities, or unmodeled effects is stated but receives no supporting analysis or robustness check.
minor comments (1)
  1. The manuscript would benefit from explicit equations for the overdetermined system and a dedicated results section with tables or figures showing recovered intervals, residuals, and comparisons.

Simulated Author's Rebuttal

2 responses · 0 unresolved

We thank the referee for the detailed review and constructive comments. We address each major comment below and agree that revisions to strengthen quantitative support and robustness analysis are warranted.

read point-by-point responses

  1. Referee: [Abstract] Abstract: the central claim that 'the test results indicate that the new time calibration method is effective' is unsupported by any quantitative results, error analysis, comparison metrics, or performance numbers, which is load-bearing for assessing whether the method recovers intervals accurately.

    Authors: We agree that the abstract requires quantitative support to substantiate the effectiveness claim. The manuscript body presents pulse timing test results showing improved time resolution after applying the calibration, but these metrics are not summarized in the abstract. We will revise the abstract to include key quantitative results, such as the measured time resolution before and after calibration along with error estimates. revision: yes

  2. Referee: [Description of the new method] Description of the new method (paragraph following the evaluation of the popular method): the assumption that the relationship between sampling intervals and the known input signal period yields overdetermined linear equations whose solution recovers the intervals without dominant contributions from noise, non-linearities, or unmodeled effects is stated but receives no supporting analysis or robustness check.

    Authors: The referee correctly identifies that the method description assumes the linear system solution is robust without explicit validation against noise or non-linearities. We will add a dedicated paragraph or subsection providing supporting analysis, such as error propagation estimates or Monte Carlo simulations under realistic noise levels, to demonstrate that these effects do not dominate the interval recovery for the tested conditions. revision: yes

Circularity Check

0 steps flagged · score 0.0 of 10

No significant circularity identified

full rationale

The derivation sets up overdetermined linear equations from the externally known input signal period to solve for the sampling intervals; the solution is obtained by standard linear algebra and is not equivalent to the input by construction. No self-citations, ansatz smuggling, uniqueness theorems from prior author work, or renaming of known results appear in the provided text. The validation step (application to pulse timing test on the team's ASIC) is independent of the equation setup. This is the normal case of a self-contained calibration technique.

Assumptions & free parameters 0 free parameters · 1 assumptions · 0 invented entities

Abstract-only review yields minimal ledger entries; the method rests on the assumption of a precisely known input period and the validity of linear modeling of sampling intervals.

assumptions (1)
  • domain assumption The input signal has a known, stable period that can be treated as exact.
    Used to relate sampling intervals to the period in the linear equations (abstract description of new method).

how reviews work

0 comments
Cite this review

Pith. "Pith review of An overdetermined linear equations-based time calibration method for fast sampling ASICs." pith.science (2026). https://pith.science/paper/N2T43APD

@misc{pith2026190702733,
  author       = {Pith},
  title        = {Pith review of: An overdetermined linear equations-based time calibration method for fast sampling ASICs},
  year         = {2026},
  howpublished = {\url{https://pith.science/paper/N2T43APD}},
  note         = {Machine review of arXiv:1907.02733}
}
read the original abstract

A novel time calibration method for waveform sampling application specific integrated circuits (ASICs) based on switched capacitor arrays (SCAs) is proposed in this paper. Precision timing extraction using SCA ASICs has been proved to be a promising technique in many high energy physics experiments. However, such ASICs suffer from irregular sampling intervals caused by process variations. Therefore, careful calibration is required to improve the time resolution of such systems. We evaluated the limitation of a popular method using the proportionality between voltage amplitude and sampling interval of adjacent switched-capacitor cells responding to either a sawtooth wave or a sine wave. The new time calibration method presented here utilizes the relationship between sampling intervals and the known input signal period to establish overdetermined linear equations, and the roots of these equations correspond to the actual sampling intervals. We applied this new method to a pulse timing test with an ASIC designed by our team, and the test results indicate that the new time calibration method is effective.

Figures

Figures reproduced from arXiv: 1907.02733 by the authors.

Figure 1
Figure 1. Waveform sampling using an SCA. However, in our research, we found that the hypothesis shown in Eq. (1) is not strictly correct. As for SCA ASICs, the input signal is transmitted along a path acting like a signal bus that all the sampling cells are connected to, and therefore parasitic resistance and capacitance are inevitable, as shown in [PITH_FULL_IMAGE:figures/full_fig_p002_1.png] view at source ↗
Figure 2
Figure 2. Circuit model of parasitic impedances of the SCA structure, where [PITH_FULL_IMAGE:figures/full_fig_p002_2.png] view at source ↗
Figure 3
Figure 3. Digitized waveform of a sine wave signal at a sampling speed of 5.2 Gsps. [PITH_FULL_IMAGE:figures/full_fig_p003_3.png] view at source ↗
Figures from the paper (8 more)
Figure 4
Figure 4. Figure 4: Simulation results. (a) Voltage gain of each cell. (b) Sampling intervals of 256 cells after correction using the zero- [PITH_FULL_IMAGE:figures/full_fig_p004_4.png]
Figure 5
Figure 5. Figure 5: (a) Block diagram of the SCA. (b) Photograph of the test bench. [PITH_FULL_IMAGE:figures/full_fig_p005_5.png]
Figure 6
Figure 6. Figure 6: Overlaid sine waves at 256 sampling cells. (a) With 11 MHz input signals. (b) With 101 MHz input signals. (c) With 202 [PITH_FULL_IMAGE:figures/full_fig_p005_6.png]
Figure 7
Figure 7. Figure 7: Sampling interval calibration results of 256 cells. (a) Histogram of intervals. (b) DNL and INL of intervals. [PITH_FULL_IMAGE:figures/full_fig_p006_7.png]
Figure 8
Figure 8. Figure 8: Effect of the new calibration method when used to calculate the period of a 202 MHz sine wave. (a) Without calibration. [PITH_FULL_IMAGE:figures/full_fig_p006_8.png]
Figure 9
Figure 9. Figure 9: (a) Waveforms recorded by two sampling channels. (b) Histogram of the time difference measurement results. [PITH_FULL_IMAGE:figures/full_fig_p007_9.png]
Figure 10
Figure 10. Figure 10: Linearity of time measurement. (a) Measured time difference versus the known value. (b) INL. [PITH_FULL_IMAGE:figures/full_fig_p007_10.png]
Figure 11
Figure 11. Figure 11: Time resolution as the time difference varies from 0 to 20 ns. (a) Result of our new method. (b) Result comparison amo [PITH_FULL_IMAGE:figures/full_fig_p007_11.png]

Discussion (0). Continue with ORCID to comment.

Reference graph

Works this paper leans on

20 extracted references · 20 canonical work pages

  1. [1]

    Paus C, Grozis C, Kephart R et al., Design and performance tests of the CDF time-of-flight system, Nucl. Instrum. Meth. A 461 (2001), 579–581

    work page 2001

  2. [2]

    The construction of the BESIII experiment, Nucl

    BESIII Collaboration. The construction of the BESIII experiment, Nucl. Instrum. Meth. A 598 (2009), 7–11

    work page 2009

  3. [3]

    D. Breton et al., High resolution photon timing with MCP-PMTs: A comparison of a commercial constant fraction discriminator (CFD) with the ASIC-based waveform digitizers TARGET and WaveCatcher, Nucl. Instrum. Meth. A 629 (2011), 123-132

    work page 2011

  4. [4]

    J. A. Aguilar et al., Performance of the front-end electronics of the ANTARES neutrino telescope, Nucl. Instrum. Meth. A 622 (2010), 59-73

    work page 2010

  5. [5]

    Sitarek et al., Analysis techniques and performance of the domino ring sampler version 4 based readout for the MAGIC telescopes, Nucl

    J. Sitarek et al., Analysis techniques and performance of the domino ring sampler version 4 based readout for the MAGIC telescopes, Nucl. Instrum. Meth. A 723 (2013), 109-120

    work page 2013

  6. [6]

    B. W. Jakoby et al., Physical and clinical performance of the mCT time-of-flight PET/CT scanner, Physics in Medicine & Biology 56.8 (2011): 2375

    work page 2011

  7. [7]

    Genat et al., Signal processing for picosecond resolution timing measurements, Nucl

    J. Genat et al., Signal processing for picosecond resolution timing measurements, Nucl. Instrum. Meth. A 607 (2009), 387-393

    work page 2009

  8. [8]

    Pegna et al., Performance of the domino ring sampler in the MAGIC experiment, Nucl

    R. Pegna et al., Performance of the domino ring sampler in the MAGIC experiment, Nucl. Instrum. Meth. A 567 (2006), 218-221

    work page 2006

Show all 20 references
  1. [9]

    Lachartre and F

    D. Lachartre and F. Feinstein, Application specific integrated circuits for ANTARES offshore fr ont-end electronics, Nucl. Instr um. Meth. A 442 (2000), 99-104

    2000

  2. [10]

    Delagnes et al., SAM: A new GHz sampling ASIC for the H.E.S.S.-II front-end electronics, Nucl

    E. Delagnes et al., SAM: A new GHz sampling ASIC for the H.E.S.S.-II front-end electronics, Nucl. Instrum. Meth. A 567 (2006), 21-26

    2006

  3. [11]

    Bechtol, S

    K. Bechtol, S. Funk, A Okumura et al., TARGET: a multi-channel digitizer chip for very-high-energy gamma-ray telescopes, Astroparticle Physics 36 (2012), 156-165

    2012

  4. [12]

    Ritt et al., Application of the DRS chip for fast waveform digitizing, Nucl

    S. Ritt et al., Application of the DRS chip for fast waveform digitizing, Nucl. Instrum. Meth. A 623 (2010), 486-488

    2010

  5. [13]

    Eric Oberla et al., A 15GSa/s, 1.5 GHz bandwidth waveform digitizing ASIC, Nucl. Instrum. Meth. A 735, (2014) 452-461

    2014

  6. [14]

    Jin-Hong, Wang et al., Waveform timing performance of a 5 GS/s fast pulse sampling module with DRS4, Chinese Physics C 39.10 (2015): 106101

    2015

  7. [15]

    Kleinfelder et al., The SST Multi-G-Sample/s Switched Capacitor Array Waveform Recorder with Flexible Trigger and Picosecond-Level Timing Accuracy, arXiv:1508.02460 (2015)

    S. Kleinfelder et al., The SST Multi-G-Sample/s Switched Capacitor Array Waveform Recorder with Flexible Trigger and Picosecond-Level Timing Accuracy, arXiv:1508.02460 (2015)

    2015 arXiv

  8. [16]

    Kim et al., A new time calibration method for switched-capacitor-array-based waveform samplers, Nucl

    H. Kim et al., A new time calibration method for switched-capacitor-array-based waveform samplers, Nucl. Instrum. Meth. A 767 (2014), 67-74

    2014

  9. [17]

    Nishimura et al., A correlation-based timing calibration and diagnostic technique for fast digitizing ASICs, Physics Pcocedia 37 (2012), 1707-1714

    K. Nishimura et al., A correlation-based timing calibration and diagnostic technique for fast digitizing ASICs, Physics Pcocedia 37 (2012), 1707-1714

    2012

  10. [18]

    Stricker-Shaver, S

    D. Stricker-Shaver, S. Ritt, a nd B. J. Pichler, Novel Calibration Method for Switched Capacitor A rrays Enables Time Measurements With Sub-Picosecond Resolution, IEEE Trans. Nucl. Sci, 2014, 61 (6): 3607-3617

    2014

  11. [19]

    Breton et al., Picosecond time measurement using ultra fast analog memeries, Topical Workshop on Electronics for Particle Physics (TWEPP-09), Sep 2009, Paris, France

    D. Breton et al., Picosecond time measurement using ultra fast analog memeries, Topical Workshop on Electronics for Particle Physics (TWEPP-09), Sep 2009, Paris, France. Cern, pp.149-154, 2009. <in2p3-00421366>

    2009

  12. [20]

    J. Wang, L. Zhao, C. Feng et al., Evaluati on of a Fast Pulse Sampling Module with Sw itched-Capacitor Arrays, IEEE Trans. Nucl. Sci, 2012, 59 (5): 2435-2443

    2012

Pith tools

Reviewed May 25, 2026 · model on record in the stance chip above.