The critical current density of advanced internal-Mg-diffusion-processed MgB2 wires

Recent advances in MgB2 conductors are leading to a new level of performance. Based on the use of proper powders, proper chemistry, and an architecture which incorporates internal Mg diffusion (IMD), a dense MgB2 structure with not only a high critical current density Jc, but also a high engineering critical current density, Je, can be obtained. In this paper, a series of these advanced (or second - generation, "2G") conductors has been prepared. Scanning electron microscopy and associated energy dispersive X-ray spectroscopy were applied to characterize the microstructures and compositions of the wires, and a dense MgB2 layer structure was observed. The best layer Jc for our sample is 1.07x105 A/cm2 at 10 T, 4.2 K, and our best Je is seen to be 1.67x104 A/cm2 at 10 T, 4.2 K. Optimization of the transport properties of these advanced wires is discussed in terms of B-powder choice, area fraction, and the MgB2 layer growth mechanism.