Pith. sign in

REVIEW

Radiation Damage Study of SensL J-Series Silicon Photomultipliers Using 101.4 MeV Protons

Not yet reviewed by Pith; the record is open.

This paper has not been read by Pith yet. Machine review is queued; the pith claim, tier, and objections will appear here once it completes.

SPECIMEN: schema-true, not a live event

T0 review · schema-true

One-sentence machine reading of the paper's core claim.

pith:XXXXXXXX · record.json · timestamp

arxiv 2007.10919 v1 pith:BJAYUR7M submitted 2020-07-21 physics.ins-det astro-ph.IM

classification physics.ins-detastro-ph.IM
keywords sipmdetectiondetectornoisearraycebr3damagedark
verification ladder T0 review T1 audit T2 compute T3 formal
0 comments
read the original abstract

Radiation damage of J-series silicon photomultipliers (SiPMs) has been studied in the context of using these photodetectors in future space-borne scintillation detectors. Several SiPM samples were exposed to 101.4 MeV protons, with 1 MeV neutron equivalent fluence ranging from 1.27*10^8 n/cm^2 to 1.23*10^10 n/cm^2 . After the irradiation, the SiPMs experienced a large increase in the dark current and noise, which may pose problems for long-running space missions in terms of power consumption, thermal control and detection of low-energy events. Measurements performed with a CeBr3 scintillator crystal showed that after exposure to 1.23*10^10 n/cm^2 and following room-temperature annealing, the dark noise of a single 6 mm square SiPM at room temperature increased from 0.1 keV to 2 keV. Because of the large SiPM noise, the gamma-ray detection threshold increased to approximately 20 keV for a CeBr3 detector using a 4-SiPM array and 40 keV for a detector using a 16-SiPM array. Only a small effect of the proton irradiation on the average detector signal was observed, suggesting no or little change to the SiPM gain and photon detection efficiency.

Discussion (0). Sign in to comment.

Pith tools