Thermal boundary condition studies in large aspect ratio Rayleigh-B\'enard convection

We study the influence of thermal boundary conditions on large aspect ratio Rayleigh-B\'enard convection by a joint analysis of experimental and numerical data sets for a Prandl number $\mathrm{Pr = 7}$ and Rayleigh numbers $\mathrm{Ra = 10^5 - 10^6}$. The spatio-temporal experimental data are obtained by combined Particle Image Velocimetry and Particle Image Thermometry measurements in a cuboid cell filled with water at an aspect ratio $\Gamma= 25$. In addition, numerical data are generated by Direct Numerical Simulations (DNS) in domains with $\Gamma = 25$ and $\Gamma = 60$ subject to different thermal boundary conditions. Our experimental data show an increased characteristic horizontal extension scale of the flow structures, $\tilde{\lambda}$, for increasing Ra, which is coupled with a raise of the Biot number Bi in particular at the cooling plate. However, we find the experimental flow structure size to range in any case between the ones observed for the idealized thermal conditions captured by the simulations. On the one hand, they are larger than in the numerical case with applied uniform temperatures at the plates, but, on the other hand, smaller than in the case of an applied constant heat flux, the latter of which leads to a structure that grows gradually up to the horizontal domain size. We link this observation qualitatively to theoretical predictions for the onset of convection. Furthermore, we study the effect of the asymmetric boundary conditions on the heat transfer. Contrasting experimental and numerical data reveals an increased probability of far-tail events of reversed heat transfer. The decomposition of the local Nusselt number $\mathrm{Nu_{loc}}$ traces this effect back to the sign of the temperature deviation $\tilde{\Theta}$, revealing asymmetries of the heating and cooling plate on the thermal variance of the generated thermal plumes.