Chemical heterogeneity enhances hydrogen resistance in high-strength steels

When H, the lightest, smallest and most abundant atom in the universe, makes its way into a high-strength alloy (>650 MPa), the material's load-bearing capacity is abruptly lost. This phenomenon, known as H embrittlement, was responsible for the catastrophic and unpredictable failure of large engineering structures in service. The inherent antagonism between high strength requirements and H embrittlement susceptibility strongly hinders the design of lightweight yet reliable structural components needed for carbon-free hydrogen-propelled industries and reduced-emission transportation solutions. Inexpensive and scalable alloying and microstructural solutions that enable both, an intrinsically high resilience to H and high mechanical performance, must be found. Here we introduce a counterintuitive strategy to exploit typically undesired chemical heterogeneity within the material's microstructure that allows the local enhancement of crack resistance and local H trapping, thereby enhancing the resistance against H embrittlement. We deploy this approach to a lightweight, high-strength steel and produce a high-number density Mn-rich zones dispersed within the microstructure. These solute-rich buffer regions allow for local micro-tuning of the phase stability, arresting H-induced microcracks thus interrupting the H-assisted damage evolution chain, regardless of how and when H is introduced and also regardless of the underlying embrittling mechanisms. A superior H embrittlement resistance, increased by a factor of two compared to a reference material with a homogeneous solute distribution within each microstructure constituent, is achieved at no expense of the material's strength and ductility.