Single-Shot Readout of a Superconducting Qubit Using a Thermal Detector

Measuring the state of qubits is one of the fundamental operations of a quantum computer. Currently, state-of-the-art high-fidelity single-shot readout of superconducting qubits relies on parametric amplifiers at the millikelvin stage. However, parametric amplifiers are challenging to scale beyond hundreds of qubits owing to practical size and power limitations. Nanobolometers have a multitude of properties that are advantageous for scalability and have recently shown sensitivity and speed promising for qubit readout, but such thermal detectors have not been demonstrated for this purpose. In this work, we utilize an ultrasensitive bolometer in place of a parametric amplifier to experimentally demonstrate single-shot qubit readout. With a readout duration of $13.9~\mu\mathrm{s}$, we achieve a single-shot fidelity of 0.618 which is mainly limited by the energy relaxation time of the qubit, $T_1 = 28~\mu\mathrm{s}$. Without the $T_1$ errors, we find the fidelity to be 0.927. In the future, high-fidelity single-shot readout may be achieved by straightforward improvements to the chip design and experimental setup, and perhaps most interestingly by the change of the bolometer absorber material to reduce the readout time to the hundred-nanosecond level and beyond.