Epitaxial (111) Films of Cu, Ni, and Cu$_xNi$_y$ on {\alpha}-Al$_2$O$_3$(0001) for Graphene Growth by Chemical Vapor Deposition

Films of (111)-textured Cu, Ni, and Cu$_x$Ni$_y$ were evaluated as substrates for chemical vapor deposition of graphene. A metal thickness of 400 nm to 700 nm was sputtered onto a substrate of $\alpha-$Al$_2$O$_3$(0001) at temperatures of 250 C to 650 C. The films were then annealed at 1000 C in a tube furnace. X-ray and electron backscatter diffraction measurements showed all films have (111) texture but have grains with in-plane orientations differing by $60^{\circ}$. The in-plane epitaxial relationship for all films was $[110]_{metal}$||$[10\bar{1}0]_{{Al}_{2}{O}_{3}}$. Reactive sputtering of Al in O$_2$ before metal deposition resulted in a single in-plane orientation over 97 % of the Ni film but had no significant effect on the Cu grain structure. Transmission electron microscopy showed a clean Ni/Al$_2$O$_3$ interface, confirmed the epitaxial relationship, and showed that formation of the $60^{\circ}$ twin grains was associated with features on the Al$_2$O$_3$ surface. Increasing total pressure and Cu vapor pressure during annealing decreased the roughness of Cu and and Cu$_x$Ni$_y$ films. Graphene grown on the Ni(111) films was more uniform than that grown on polycrystalline Ni/SiO$_2$ films, but still showed thickness variations on a much smaller length scale than the distance between grains.