Architectural Design of a RAM Arbiter

Standard memory modules to store (and access) data are designed for use with a single system accessing it. More complicated memory modules would be accessed through a memory controller, which are also designed for one system. For multiple systems to access a single memory module there must be some facilitation that allows them to access the memory without overriding or corrupting the access from the others. This was done with the use of a memory arbiter, which controls the flow of traffic into the memory controller. The arbiter has a set of rules to abide to in order to choose which system gets through to the memory controller. In this project, a regular RAM module is designed for use with one system. Furthermore, a memory arbiter is also designed in Verilog that allows for more than one system to use a single RAM module in a controlled and synchronized manner. The arbiter uses a fixed priority scheme to avoid starvation of the system. In addition one of the major problems associated with such systems i.e. The Address Clash Problem has been nicely tackled and solved. The design is verified in simulation and validated on a Xilinx ML605 evaluation board with a Virtex 6 FPGA.