REVIEW 2 cited by
Design optimization of JUNO-TAO plastic scintillator with WLS-fiber and SiPM readout
Not yet reviewed by Pith; the record is open.
This paper has not been read by Pith yet. Machine review is queued; the pith claim, tier, and objections will appear here once it completes.
SPECIMEN: schema-true, not a live event
T0 review · schema-true
One-sentence machine reading of the paper's core claim.
pith:XXXXXXXX · record.json · timestamp
Signed reviews
read the original abstract
Plastic scintillators (PSs)embedded with wavelength-shifting fibers are widely used in high-energy particle physics, such as in muon taggers,as well as in medical physics and other applications. In this study,a simulation package was built to evaluate the effects of the diameter and layout of optical fibers on the light yield with different configurations. The optimal optical configuration was designed based on simulations and validated using two PS prototypes under certain experimental conditions. Atop veto tracker (TVT) for the JUNO-TAO experiment, comprising four layers of 160 strips of PS, was designed and evaluated. The threshold was evaluated when the muon tagging efficiency of a PS strip was >99%. The efficiency of three layer out of four layer of TVT is >99%,even with a tagging efficiency of a single strip as low as 97%, using a threshold of 10 photoelectrons and assuming a 40%silicon PM photon detection efficiency.
Forward citations
Cited by 2 Pith papers
-
Calibration Methods of Silicon Photomultiplier for JUNO-TAO Central Detector
Calibration methods for SiPM parameters in JUNO-TAO achieve quantified biases below 3% and limit impacts on vertex precision and energy resolution to under 3%.
-
DarkSHINE Baseline Design Report: Physics Prospects and Detector Technologies
The DarkSHINE baseline design projects 90% C.L. sensitivity to dark photon kinetic mixing epsilon^2 as low as ~1e-12 for masses around 1-100 MeV with 3e14 electrons on target.
Discussion (0). Continue with ORCID to comment.