Microstructure and mechanical properties of Al-Cu alloy with 0.6%Fe produced with ultrasonic vibration and applied pressure

Chao Yang; Datong Zhang; Fansheng Meng; Weiwen Zhang; Yuliang Zhao; Zhiyu Xiao

arxiv: 1801.03246 · v1 · pith:JYVQIW4Jnew · submitted 2018-01-10 · ❄️ cond-mat.mtrl-sci

Microstructure and mechanical properties of Al-Cu alloy with 0.6%Fe produced with ultrasonic vibration and applied pressure

Yuliang Zhao , Weiwen Zhang , Fansheng Meng , Datong Zhang , Chao Yang , Zhiyu Xiao This is my paper

classification ❄️ cond-mat.mtrl-sci

keywords alloypropertiesappliedmechanicalmicrostructurepressureproducedrespectively

0 comments

read the original abstract

The combined effect of ultrasonic vibration (UT) and applied pressure (P) on microstructure and mechanical properties of Al-5.0Cu-0.6Mn-0.6Fe alloy were investigated. The best tensile properties produced by P+UT processing are UTS: 268MPa, YS: 192MPa, E.L.: 17.1%, respectively, which increasing by 64%, 59% and 307%, respectively, compare to the Non-treated alloy.

This paper has not been read by Pith yet.

Microstructure and mechanical properties of Al-Cu alloy with 0.6%Fe produced with ultrasonic vibration and applied pressure

discussion (0)