Assessment of absorbed power density and temperature rise for nonplanar body model under electromagnetic exposure above 6 GHz

The averaged absorbed power density (APD) and temperature rise in body models with nonplanar surfaces were computed for electromagnetic exposure above 6 GHz. Different calculation schemes for the averaged APD were investigated. Additionally, a novel compensation method for correcting the heat convection rate on the air/skin interface in voxel human models was proposed and validated. The compensation method can be easily incorporated into bioheat calculations and does not require information regarding the normal direction of the boundary voxels, in contrast to a previously proposed method. The APD and temperature rise were evaluated using models of a two-dimensional cylinder and a three-dimensional partial forearm. The heating factor, which was defined as the ratio of the temperature rise to the APD, was calculated using different APD averaging schemes. Our computational results revealed different frequency and curvature dependences. For body models with curvature radii of >30 mm and at frequencies of >20 GHz, the differences in the heating factors among the APD schemes were small.