pith. sign in

arxiv: 1508.03825 · v1 · pith:PENZD4VInew · submitted 2015-08-16 · ❄️ cond-mat.mes-hall

Wideband superconducting nanotube electrometer

classification ❄️ cond-mat.mes-hall
keywords junctionmathrmmicrowavechargecurrentjunctionsmodifiesnanotube
0
0 comments X
read the original abstract

We have investigated the microwave response of nanotube Josephson junctions at 600-900 MHz at microwave powers corresponding to currents from 0 to $2\times I_{\mathrm C}$ in the junction. Compared with theoretical modeling, the response of the junctions correspond well to the lumped element model of resistively and capacitively shunted junction. We demonstrate the operation of these superconducting FETs as charge detectors at high frequencies without any matching circuits. Gate-voltage-induced charge $Q_{\rm G}$ modifies the critical current $I_{\rm C}$, which changes the effective impedance of the junction under microwave irradiation. This change, dependent on the transfer characteristics $dI_{\mathrm C}/dQ_{\rm G}$, modifies the reflected signal and it can be used for wide band electrometry. We measure a sensitivity of $3.1\times10^{-5}$ $e/\sqrt{\mathrm{Hz}}$ from a sample which has a maximum switching current of 2.6 nA.

This paper has not been read by Pith yet.

discussion (0)

Sign in with ORCID, Apple, or X to comment. Anyone can read and Pith papers without signing in.