pith. sign in

arxiv: 1907.06939 · v1 · pith:RAM4PHQNnew · submitted 2019-07-16 · ⚛️ physics.app-ph

Metal Droplet Effects on the Composition of Ternary Nitrides

Pith reviewed 2026-05-24 20:49 UTC · model grok-4.3

classification ⚛️ physics.app-ph
keywords InGaN epilayersmetal dropletsindium incorporationmolecular beam epitaxyvapor-liquid-solid growthternary nitridesplasma-assisted growth
0
0 comments X

The pith

Metal droplets covering the surface reduce indium incorporation into InGaN epilayers, and the reduction grows with droplet density and coverage.

A machine-rendered reading of the paper's core claim, the machinery that carries it, and where it could break.

The paper examines how metal droplets affect the amount of indium that gets built into InGaN layers during low-temperature growth by plasma-assisted molecular beam epitaxy. It reports that indium incorporation drops sharply when droplets are present on the surface, and this drop becomes larger as more of the surface is covered by droplets. The authors propose a model that links the effect to indium atoms moving more freely than gallium atoms and to crystal growth happening directly under the droplets through nitrogen hitting the liquid metal. This model is presented as applicable to other ternary compounds grown with surface droplets.

Core claim

Metal droplets on the growth surface cause a strong reduction in indium incorporation in InGaN epilayers. This reduction scales with the density of droplets and the fraction of surface they cover. The effect arises from the higher mobility of indium adatoms compared to gallium combined with vapor-liquid-solid growth under the droplets driven by direct nitrogen impingement.

What carries the argument

A model combining higher indium adatom mobility relative to gallium with vapor-liquid-solid growth under the metal droplets by direct nitrogen impingement.

If this is right

  • Indium content in the crystal falls as droplet density on the surface increases.
  • The reduction in indium incorporation intensifies with greater droplet surface coverage.
  • The same mechanism can describe adatom incorporation in other ternary compounds when droplets are present.
  • Growth conditions that minimize droplet formation would preserve higher indium levels in the epilayer.

Where Pith is reading between the lines

These are editorial extensions of the paper, not claims the author makes directly.

  • Controlling droplet formation during growth could be used to tune the composition of InGaN without changing other parameters.
  • Similar droplet effects might appear in other nitride ternaries or even non-nitride systems with liquid metal on the surface.
  • Further experiments could test if the model predicts the exact scaling of indium reduction with coverage.

Load-bearing premise

The proposed explanation based on indium's higher mobility and direct nitrogen impingement under droplets accurately accounts for the observed drop in indium incorporation.

What would settle it

An experiment that measures indium content across areas with different controlled droplet densities while keeping temperature, fluxes, and other conditions fixed would test the claim if the reduction does not scale with coverage.

Figures

Figures reproduced from arXiv: 1907.06939 by Alexey Fedorov, Daniel Chrastina, Emiliano Bonera, Mani Azadmand, Maurizio Acciarri, Richard N\"otzel, Sergio Bietti, Shiro Tsukamoto, Stefano Sanguinetti, Stefano Vichi.

Figure 1
Figure 1. Figure 1: Fig.1 [PITH_FULL_IMAGE:figures/full_fig_p013_1.png] view at source ↗
Figure 2
Figure 2. Figure 2: Optical images of sample surfaces with the indication of the actual surface coverage by droplets. Black line length in all the images is 100 μm [PITH_FULL_IMAGE:figures/full_fig_p014_2.png] view at source ↗
Figure 3
Figure 3. Figure 3: Indium concentration in InGaN layers (measured by XRD) as a function of metal droplets surface coverage 0 5 10 15 20 25 30 35 40 0 10 20 30 40 50 Diffusion Indium concentration (%) Surface coverage by metal droplets (%) VLS [PITH_FULL_IMAGE:figures/full_fig_p015_3.png] view at source ↗
Figure 4
Figure 4. Figure 4: Line scan Raman spectroscopy around footprint of a meta [PITH_FULL_IMAGE:figures/full_fig_p016_4.png] view at source ↗
Figure 5
Figure 5. Figure 5: FWHM of XRD ω-2θ scan of InGaN samples vs surface coverage by metal droplets 0.10 0.15 0.20 0.25 0.30 0.35 -5 0 5 10 15 20 25 30 35 40 Droplet surface coverage (%) XRD FWHM (degree) [PITH_FULL_IMAGE:figures/full_fig_p017_5.png] view at source ↗
read the original abstract

We investigate effects of metal droplets on the In incorporation in InGaN epilayers grown at low temperature (450 C) by plasma assisted molecular beam epitaxy. We find a strong reduction of the In incorporation when the surface is covered by metal droplets. The such reduction increases with the droplet density and the droplet surface coverage. We explain this phenomenonology via a model that considers droplet effects on the incorporation of In and Ga adatoms into the crystal by taking into account the combined effects of the higher mobility of In, with respect to Ga, and to the vapor-liquid-solid growth that takes place under the droplet by direct impingement of nitrogen. The proposed model is general and can be extended to describe the incorporation of adatoms during the growth of the material class of ternary compounds when droplets are present on the surface.

Editorial analysis

A structured set of objections, weighed in public.

Desk editor's note, referee report, simulated authors' rebuttal, and a circularity audit. Tearing a paper down is the easy half of reading it; the pith above is the substance, this is the friction.

Referee Report

2 major / 2 minor

Summary. The manuscript investigates effects of metal droplets on In incorporation during low-temperature (450°C) plasma-assisted MBE growth of InGaN epilayers. It reports a strong reduction in In incorporation that increases with droplet density and surface coverage. A qualitative model is proposed that invokes the higher mobility of In adatoms relative to Ga combined with vapor-liquid-solid incorporation under droplets via direct N impingement; the model is stated to be generalizable to other ternary compounds.

Significance. If the reported correlation holds and the mechanism is substantiated, the result bears on composition control during MBE growth of InGaN and related ternaries, where droplet formation is frequently encountered. A generalizable model could inform strategies to mitigate or exploit droplet effects for targeted alloy compositions.

major comments (2)
  1. [Abstract] Abstract: the central observational claim of a 'strong reduction' that 'increases with the droplet density and the droplet surface coverage' is stated without any numerical values, error bars, or reference to specific measurements (e.g., In fraction x from XRD or RBS, droplet coverage fractions). The full manuscript must supply these data and the statistical basis for the correlation in a results section; without them the claim cannot be evaluated.
  2. [Model description] Model description (inferred from abstract): the explanation is presented purely qualitatively. To be load-bearing for the claimed mechanism, the manuscript should supply at least rate equations or a schematic that quantifies how differential In/Ga mobility plus VLS incorporation under droplets produces lower In content, together with a direct comparison of model trends to the experimental coverage dependence.
minor comments (2)
  1. [Abstract] Abstract, line 3: 'The such reduction' is grammatically incorrect; replace with 'Such a reduction' or 'This reduction'.
  2. [Abstract] Abstract: the statement that the model 'is general and can be extended' lacks any discussion of its assumptions or range of validity (e.g., temperature, III/V ratio, or droplet size regime).

Simulated Author's Rebuttal

2 responses · 0 unresolved

We thank the referee for the detailed review and valuable suggestions. We have prepared point-by-point responses below and will revise the manuscript to address the concerns raised.

read point-by-point responses
  1. Referee: [Abstract] Abstract: the central observational claim of a 'strong reduction' that 'increases with the droplet density and the droplet surface coverage' is stated without any numerical values, error bars, or reference to specific measurements (e.g., In fraction x from XRD or RBS, droplet coverage fractions). The full manuscript must supply these data and the statistical basis for the correlation in a results section; without them the claim cannot be evaluated.

    Authors: The full manuscript does include these data in the Results section, with In fractions determined by XRD and RBS, plotted versus droplet coverage with error bars from replicate measurements. We will revise the abstract to include specific numerical examples and direct references to the relevant figures and tables to make the claim more concrete. revision: yes

  2. Referee: [Model description] Model description (inferred from abstract): the explanation is presented purely qualitatively. To be load-bearing for the claimed mechanism, the manuscript should supply at least rate equations or a schematic that quantifies how differential In/Ga mobility plus VLS incorporation under droplets produces lower In content, together with a direct comparison of model trends to the experimental coverage dependence.

    Authors: We acknowledge that the model is described qualitatively in the current version. To address this, we will add a schematic diagram illustrating the proposed mechanism and simple rate equations for the incorporation rates under and outside the droplets. We will also include a comparison of the model's predicted trend with the experimental data on coverage dependence. revision: yes

Circularity Check

0 steps flagged

No significant circularity detected

full rationale

The paper reports an experimental correlation between metal droplet coverage and reduced In incorporation in InGaN epilayers, supported by direct measurements of composition versus droplet density. The proposed model is presented as a qualitative interpretive framework invoking differential In/Ga mobility and VLS incorporation under droplets; no quantitative equations, fitted parameters, or predictions are shown that reduce by construction to inputs from the same dataset. The derivation chain consists of observational data plus a general explanatory ansatz that does not self-define or rename its own results, satisfying the criteria for a self-contained, non-circular analysis.

Axiom & Free-Parameter Ledger

0 free parameters · 0 axioms · 0 invented entities

Abstract-only review supplies no explicit free parameters, axioms, or invented entities; the model is described at a conceptual level without equations or fitted constants.

pith-pipeline@v0.9.0 · 5702 in / 1122 out tokens · 20393 ms · 2026-05-24T20:49:45.488515+00:00 · methodology

discussion (0)

Sign in with ORCID, Apple, or X to comment. Anyone can read and Pith papers without signing in.

Reference graph

Works this paper leans on

38 extracted references · 38 canonical work pages

  1. [1]

    Yam, F. K. & Hassan, Z. InGaN: An overview of the growth kin etics, physical properties and emission mechanisms. Superlattices Microstruct. 43, 1–23 (2008)

  2. [2]

    & Walukiewicz, W

    Hsu, L. & Walukiewicz, W. Modeling of InGaN/Si tandem solar cells. J. Appl. Phys. 104, 24507 (2008)

  3. [3]

    Aseev, P. et al. Near-infrared emitting In-rich InGaN layers grown directly on Si: Towards the whole composition range. Appl. Phys. Lett. 106, 072102 (2015)

  4. [4]

    Alvi, N. H. et al. Highly efficient potentiometric glucose biosensor based on fun ctionalized InN quantum dots. Appl. Phys. Lett. 101, 153110 (2012)

  5. [5]

    Alvi, N. U. H. et al. Highly sensitive and fast anion-selective InN quantum dot elec trochemical sensors. Appl. Phys. Express 6, 115201 (2013)

  6. [6]

    Alvi, N. ul H. et al. InN/InGaN quantum dot photoelectrode: Efficient hydrogen generation by water splitting at zero voltage. Nano Energy 13, 291–297 (2015)

  7. [7]

    Iliopoulos, E. et al. InGaN(0001) alloys grown in the entire composition range by pl asma assisted molecular beam epitaxy. Phys. Status Solidi Appl. Mater. Sci. 203, 102–105 (2006)

  8. [8]

    & Stringfellow, G

    Ho, I. & Stringfellow, G. B. Solid phase immiscibility in Ga InN. Appl. Phys. Lett. 69, 2701–2703 (1996)

  9. [9]

    & Sasaki, A

    Wakahara, A., Tokuda, T., Dang, X.-Z., Noda, S. & Sasaki, A. Compositional inhomogeneity and immiscibility of a GaInN ternary alloy. Appl. Phys. Lett. 71, 906–908 (1997)

  10. [10]

    Karpov, S. Y. Suppression of phase separation in InGaN due to elastic strain. Mater. Res. Soc. Internet J. Nitride Semicond. Res. 3, 6–10 (1998)

  11. [11]

    N., Ludwig Jr, K

    Doppalapudi, D., Basu, S. N., Ludwig Jr, K. F. & Moustakas, T. D. Phase separation and ordering in InGaN alloys grown by molecular beam epitaxy. J. Appl. Phys. 84, 1389–1395 (1998)

  12. [12]

    A., Piner, E

    El-Masry, N. A., Piner, E. L., Li u, S . X. & Bedair, S. M. P hase separation in InGaN grown by metalorganic chemical vapor deposition. Appl. Phys. Lett. 72, 40–42 (1998)

  13. [13]

    Thermal stability and desorption of Group III nitrides prepared by metal organic chemical vapor deposition

    Ambacher, O. Thermal stability and desorption of Group III nitrides prepared by metal organic chemical vapor deposition. J. Vac. Sci. Technol. B Microelectron. Nanom. Struct. 14, 3532 (1996)

  14. [14]

    Dimakis, E. et al. Plasma-assisted MBE growth of quaternary InAlGaN quantum well heterostructures with room temperature luminescence. J. Cryst. Growth 251, 476–480 (2003)

  15. [15]

    Böttcher, T. et al. Incorporation of indium during mo lecular beam epitaxy of InGaN . Appl. Phys. Lett. 73, 3232–3234 (1998)

  16. [16]

    V, Talalaev, R

    Bord, O. V, Talalaev, R. A., Karpov, S. Y. & Makarov, Y. N. Indium incorporation and droplet formation during InGaN molecular beam epitaxy. Phys. status solidi 176, 297–300 (1999)

  17. [17]

    Kumar, P. et al. First demonstration of direct growth of planar high-In-composi tion InGaN layers on Si. Appl. Phys. Express 6, 035501 (2013)

  18. [18]

    Azadmand, M. et al. Droplet Controlled Growth Dynamics in Molecular Beam Epitaxy o f Nitride Semiconductors. Sci. Rep. 8, 11278 (2018)

  19. [19]

    Chen, B. H. A. F. & Speck, E. H. R. S. Control of GaN surfa ce morphologies using plasma-assisted molecular beam epitaxy. J. Appl. Phys. 88, 1855 (2010)

  20. [20]

    Adelmann, C. et al. Dynamically stable gallium surface coverages during plasma-ass isted molecular-beam epitaxy of (0001) GaN. J. Appl. Phys. 91, 9638–9645 (2002)

  21. [21]

    Tarsa, E. J. et al. Homoepitaxial growth of GaN under Ga-stable and N-stable conditions by plasma- assisted molecular beam epitaxy. J. Appl. Phys. 82, 5472–5479 (1997)

  22. [22]

    Fernández-Garrido, S., Grandal, J., Calleja, E., Sánchez-Ga rcía, M. A. & López-Romero, D. A growth diagram for plasma-assisted molecular beam epitaxy of GaN nanocolumns on Si (111). Appl. Phys. 106, 126102 (2009)

  23. [23]

    & Sawaki, N

    Shimizu, M., Hiramatsu, K. & Sawaki, N. Metalorganic vapor phase epitaxy growth of (InxGa1- xN/GaN)n layered structures and reduction of indium droplets. J. Cryst. Growth 145, 209–213 (1994)

  24. [24]

    You, A., Be, M. A. Y. & In, I. Influence of dislocations on indium diffusion in semi-polar InGaN / GaN heterostructures. AIP Adv. 5, 057129 (2015)

  25. [25]

    Phys, J. A. Analysis of mass transport mechanism in InGaN e pitaxy on ridge shaped selective area growth GaN by metal organic chemical vapor deposition. J. Appl. Phys. 103, 014908 (2008)

  26. [26]

    Yokota, K. et al. Related content First Observation of the Si ( 111 ) -7 × 7 ↔ 1 × 1 Phase Transition by the Optical Second Harmonic Generation. Jpn. J. Appl. Phys. 32, L610–L613 (1993)

  27. [27]

    & Okumura, H

    Nakada, Y., Aksenov, I. & Okumura, H. GaN heteroepitaxial g rowth on silicon nitride buffer layers formed on Si (111) surfaces by plasma-assisted molecular beam epitaxy. Appl. Phys. Lett. 73, 827– 829 (1998)

  28. [28]

    Azadmand, M. et al. Raman spectroscopy of epitaxial InGaN/Si in the central compos ition range. Jpn. J. Appl. Phys. 58, SC1020 (2019)

  29. [29]

    R., Tessier, F., Navrotsky, A

    Ranade, M. R., Tessier, F., Navrotsky, A. & Marchand, R. Ca lorimetric determination of the enthalpy of formation of InN and comparison with AlN and GaN. Mater. Res. Soc. 16, 2824 (2001)

  30. [30]

    Johnsona, M. A. L. et al. Growth of GaN, InGaN, and AlGaN films and quantum well structures by molecular beam epitaxy. J. Cryst. Growth 175, 76–72 (1997)

  31. [31]

    Priante, G. et al. Sharpening the interfaces of axial heterostructures in self-ca talyzed AlGaAs nanowires: experiment and theory. Nano Lett. 16, 1917–1924 (2016)

  32. [32]

    Voorhees, P. W. The theory of Ostwald ripening. J. Stat. Phys. 38, 231–252 (1985)

  33. [33]

    Namkoong, G. et al. Metal modulation epitaxy growth for extremely high hole concentrations above 1019 cm-3 in GaN. Appl. Phys. Lett. 93, 172112 (2008)

  34. [34]

    Clinton, E. A. et al. A review of the synthesis of reduced defect density InxGa1−xN for all indium compositions. Solid. State. Electron. 136, 3–11 (2017)

  35. [35]

    & Nanishi, Y

    Yamaguchi, T. & Nanishi, Y. Indium droplet elimination by r adical beam irradiation for reproducible and high-quality growth of InN by RF molecular beam epitaxy. Appl. Phys. Express 2, 051001 (2009)

  36. [36]

    Yamaguchi, T. et al. Growth of thick InGaN films with entire alloy composition usin g droplet elimination by radical-beam irradiation. J. Cryst. Growth 377, 123–126 (2013)

  37. [37]

    & Doolittle, W

    Moseley, M., Lowder, J., Billingsley, D. & Doolittle, W. A. Control of surface adatom kinetics for the growth of high-indium content InGaN throughout the miscibil ity gap. Appl. Phys. Lett. 97, 70– 73 (2010)

  38. [38]

    Moseley, M. et al. Observation and control of the surface kinetics of InGaN for t he elimination of phase separation. J. Appl. Phys. 112, 014909 (2012). Table 1. Growth parameters and samples characteristics Fig.1. ω-2θ scan XRD of InGaN thin-films (grown on Si(111)) with different metal droplets surface coverage. 10 0 10 1 10 2 10 3 14 15 16 17 18 Si(111...