Broadband lightweight flat lenses for longwave-infrared imaging
Reviewed by Pith T0 review T1 audit T2 compute T3 formal T4 kernel pith:UJB2ISLWrecord.jsonopen to challenge →
read the original abstract
We experimentally demonstrate imaging in the longwave-infrared (LWIR) spectral band (8um to 12um) using a single polymer flat lens based upon multi-level diffractive optics. The device thickness is only 10{\mu}m, and chromatic aberrations are corrected over the entire LWIR band with one surface. Due to the drastic reduction in device thickness, we are able to utilize polymers with absorption in the LWIR, allowing for inexpensive manufacturing via imprint lithography. The weight of our lens is less than 100 times those of comparable refractive lenses. We fabricated and characterized two different flat lenses. Even with about 25% absorption losses, experiments show that our flat polymer lenses obtain good imaging with field of view of ~35degrees and angular resolution less than 0.013 degrees. The flat lenses were characterized with two different commercial LWIR image sensors. Finally, we show that by using lossless, higher-refractive-index materials like silicon, focusing efficiencies in excess of 70% can be achieved over the entire LWIR band. Our results firmly establish the potential for lightweight, ultra-thin, broadband lenses for high-quality imaging in the LWIR band.
This paper has not been read by Pith yet.
discussion (0)
Sign in with ORCID, Apple, or X to comment. Anyone can read and Pith papers without signing in.