pith. sign in

arxiv: 2603.14044 · v2 · submitted 2026-03-14 · ⚛️ physics.optics

Thermally accessible broadband soliton microcombs in silicon carbide enabled by dynamic polarization control

Haoyang Tan , Yi Zheng , Xiyuan Lu , Yang Liu , Andreas Jacobsen , Kresten Yvind , Kartik Srinivasan , Minhao Pu This is my paper

Pith reviewed 2026-05-15 11:15 UTC · model grok-4.3

classification ⚛️ physics.optics
keywords soliton microcombssilicon carbidedynamic polarization controlthermal compensationthermo-optic instabilitiesbroadband combsself-cooling
0
0 comments X

The pith

Dynamic polarization control moves cooling power into the soliton mode after formation, yielding broader and higher-power microcombs.

A machine-rendered reading of the paper's core claim, the machinery that carries it, and where it could break.

The paper establishes that thermo-optic instabilities in microresonators can be managed more efficiently by using dynamic polarization control rather than locking cooling power in an auxiliary mode. During soliton initiation, part of the pump couples to an orthogonally polarized mode to provide self-cooling. After the soliton forms, polarization rotation combined with pump tuning transfers that cooling power to the primary comb-generating mode. This produces a single-soliton microcomb with 108 GHz free spectral range spanning more than 450 nm, delivering roughly 39 percent wider 20-dB bandwidth and 60 percent higher comb power than static self-cooling. A reader would care because the approach frees up laser power for comb generation instead of continuous thermal compensation, making reliable soliton sources more practical on platforms such as silicon carbide.

Core claim

The central claim is that a dynamic polarization-based thermal compensation scheme—initially coupling pump light to an orthogonally polarized auxiliary mode for self-cooling during soliton initiation, then rotating polarization and tuning the pump to transfer cooling power to the comb-generating mode—enables efficient single-soliton operation with improved bandwidth and power in silicon carbide microresonators.

What carries the argument

Dynamic polarization control, which routes pump light through an orthogonally polarized auxiliary mode for initial self-cooling and then rotates polarization to redirect that power to the primary mode after soliton formation.

If this is right

  • Single-soliton microcombs reach over 450 nm span at 108 GHz FSR with efficient use of pump power.
  • The 20-dB bandwidth increases by approximately 39 percent and comb power by 60 percent compared with static self-cooling.
  • Laser power previously reserved for continuous thermal compensation becomes available for comb generation.
  • The scheme provides a practical route to high-performance soliton microcombs in platforms with strong thermo-optic effects.

Where Pith is reading between the lines

These are editorial extensions of the paper, not claims the author makes directly.

  • The same polarization-transfer timing could be tested in other high-thermo-optic-coefficient materials to extend comb span further.
  • Real-time monitoring of soliton stability during the polarization switch would confirm whether the transfer remains robust across different pump powers.
  • If the method generalizes, it may reduce the need for auxiliary heaters or separate cooling lasers in integrated photonic circuits.
  • Optimizing the exact moment of polarization rotation might allow access to even wider combs without sacrificing soliton lifetime.

Load-bearing premise

Polarization rotation and pump tuning can transfer the cooling power to the comb-generating mode without destabilizing the soliton or introducing new thermal or polarization instabilities.

What would settle it

Measuring whether rotating the polarization after soliton formation causes the soliton to collapse or eliminates the reported 39 percent bandwidth and 60 percent power gains relative to the static case.

Figures

Figures reproduced from arXiv: 2603.14044 by Andreas Jacobsen, Haoyang Tan, Kartik Srinivasan, Kresten Yvind, Minhao Pu, Xiyuan Lu, Yang Liu, Yi Zheng.

Figure 1
Figure 1. Figure 1: schematically illustrates the principle of single￾soliton generation in a microresonator via thermal com￾pensation using an obliquely polarized pump. The sub￾sequent cooling power reuse further enhances the comb power and bandwidth. In this scheme, the TE mode is designated as the comb mode for soliton generation, while a red-detuned TM mode serves as a cooling mode for thermal compensation. Under a purely… view at source ↗
Figure 2
Figure 2. Figure 2: (b) presents the measured transmission spec￾tra of the fundamental TE00 (green) and TM00 (red) modes. The integrated dispersion, defined as Dint(µ) = ωµ−(ω0+D1µ), is extracted from the transmission spec￾tra and plotted in Figs. 2(c) and 2(d). Here, µ represents the mode index relative to the pump mode (µ = 0), ωµ is the resonance frequency, and D1/2π denotes the FSR at the pump frequency. The TE mode is en… view at source ↗
Figure 3
Figure 3. Figure 3: FIG. 3 [PITH_FULL_IMAGE:figures/full_fig_p005_3.png] view at source ↗
read the original abstract

Optical microcombs generated in high-Q microresonators are promising chip-scale light sources for applications ranging from optical communications to spectroscopy and metrology. However, thermo-optic instabilities remain a major obstacle to reliable soliton access. Self-cooling using auxiliary modes can stabilize the intracavity power, yet part of the power is continuously allocated to thermal compensation rather than comb generation, thereby limiting comb power and bandwidth. Here we propose a thermal compensation scheme based on dynamic polarization control. During soliton initiation, a fraction of the pump is coupled to an orthogonally polarized mode to provide self-cooling and ensure reliable soliton access. After soliton formation, polarization rotation and pump tuning transfer this cooling power to the comb-generating mode, enabling efficient single-soliton operation. Using this approach, we experimentally demonstrate a broadband 108-GHz-FSR single-soliton microcomb spanning over 450 nm, together with approximately 39% improvement in the 20-dB bandwidth and 60% increase in comb power relative to the static self-cooling configuration. This dynamic polarization-based thermal compensation enables efficient use of available laser power and provides a practical route to high-performance soliton microcombs in platforms with strong thermo-optic effects.

Editorial analysis

A structured set of objections, weighed in public.

Desk editor's note, referee report, simulated authors' rebuttal, and a circularity audit. Tearing a paper down is the easy half of reading it; the pith above is the substance, this is the friction.

Referee Report

2 major / 2 minor

Summary. The manuscript experimentally demonstrates a dynamic polarization control scheme for thermal compensation in silicon carbide microresonators. During soliton initiation, part of the pump couples to an orthogonally polarized auxiliary mode for self-cooling; after formation, polarization rotation and pump retuning transfer this cooling power to the primary comb mode. This yields a single-soliton microcomb with 108 GHz FSR spanning >450 nm, together with ~39% wider 20-dB bandwidth and ~60% higher comb power relative to static self-cooling.

Significance. If the transfer mechanism operates stably, the approach offers a practical route to higher-efficiency soliton microcombs in platforms with strong thermo-optic effects by freeing laser power previously allocated to continuous thermal compensation. The direct spectral and power measurements provide concrete evidence of bandwidth and power gains over the static baseline.

major comments (2)
  1. [Experimental results] The central claim requires that polarization rotation and pump retuning after soliton formation stably transfers auxiliary-mode cooling power into the comb-generating mode without crossing the soliton existence boundary or exciting new instabilities. However, the manuscript provides no time-resolved intracavity power or polarization traces during the rotation event itself (experimental results section), so it remains possible that the reported improvements reflect a different static operating point rather than the proposed dynamic transfer.
  2. [Methods and abstract] Quantitative details on the polarization rotation sequence, tuning rates, thermal time constants, and error bars for the stated 39% bandwidth and 60% power improvements are absent from the abstract and methods; without these, reproducibility and the absence of transient instabilities cannot be assessed.
minor comments (2)
  1. [Abstract] The wavelength span is stated as 'over 450 nm' without specifying the exact edges or the 20-dB bandwidth definition used for the percentage comparison.
  2. [Figures] Figure captions should explicitly label the static self-cooling reference spectra and power levels to allow direct visual comparison with the dynamic case.

Simulated Author's Rebuttal

2 responses · 0 unresolved

We thank the referee for the constructive comments and positive assessment of the significance of our dynamic polarization control approach. We address each major comment below and will revise the manuscript to provide stronger experimental validation and quantitative details.

read point-by-point responses

  1. Referee: [Experimental results] The central claim requires that polarization rotation and pump retuning after soliton formation stably transfers auxiliary-mode cooling power into the comb-generating mode without crossing the soliton existence boundary or exciting new instabilities. However, the manuscript provides no time-resolved intracavity power or polarization traces during the rotation event itself (experimental results section), so it remains possible that the reported improvements reflect a different static operating point rather than the proposed dynamic transfer.

    Authors: We agree that time-resolved intracavity power and polarization traces during the rotation event would provide direct evidence of the dynamic transfer without instabilities. The current manuscript demonstrates the outcome through the final stable broadband soliton spectrum and the measured improvements relative to the static case. In the revised version we will add supplementary time-resolved traces recorded during the polarization rotation and pump retuning steps, confirming that the auxiliary-mode cooling power is transferred to the comb mode without crossing the soliton existence boundary. revision: yes

  2. Referee: [Methods and abstract] Quantitative details on the polarization rotation sequence, tuning rates, thermal time constants, and error bars for the stated 39% bandwidth and 60% power improvements are absent from the abstract and methods; without these, reproducibility and the absence of transient instabilities cannot be assessed.

    Authors: We acknowledge that the abstract and methods lack the requested quantitative parameters. In the revised manuscript we will expand the methods section with explicit values for the polarization rotation sequence, tuning rates, and thermal time constants, and we will report error bars on the 39% bandwidth and 60% power improvements. The abstract will be updated to include these quantitative details. revision: yes

Circularity Check

0 steps flagged

No circularity: purely experimental demonstration with direct measurements

full rationale

The paper reports an experimental demonstration of soliton microcomb generation in silicon carbide using dynamic polarization control for thermal compensation. The central claims rest on measured spectra, bandwidth, and power values obtained after polarization rotation and pump tuning. No derivation chain, equations, or predictions are presented that reduce to fitted parameters, self-definitions, or self-citations. The method is described procedurally and validated by direct observation rather than by any self-referential modeling step. This is the expected outcome for an experimental optics paper whose results are externally falsifiable via replication of the reported spectra and power metrics.

Axiom & Free-Parameter Ledger

0 free parameters · 2 axioms · 0 invented entities

The central claim rests on the existence of orthogonally polarized modes in the microresonator and the ability to controllably rotate polarization without disrupting soliton stability; these are standard domain assumptions in integrated photonics.

axioms (2)
  • domain assumption Orthogonally polarized modes exist and can be selectively excited in the silicon carbide microresonator
    Invoked in the description of routing pump power during soliton initiation
  • domain assumption Polarization rotation and pump tuning can be performed without losing the soliton state
    Central to the transfer step after soliton formation

pith-pipeline@v0.9.0 · 5535 in / 1342 out tokens · 44133 ms · 2026-05-15T11:15:09.798061+00:00 · methodology

discussion (0)

Sign in with ORCID, Apple, or X to comment. Anyone can read and Pith papers without signing in.

Reference graph

Works this paper leans on

64 extracted references · 64 canonical work pages · 1 internal anchor

  1. [1]

    Thermally accessible broadband soliton microcombs in silicon carbide enabled by dynamic polarization control

    andχ (3), and relatively large Kerr nonlinear index (∼10 −18 m2/W) [35, 36]. However, the relatively large thermo-optic coefficient (≈4.2×10 −5 K−1 for 4H-SiC, roughly twice that of Si3N4) [37, 38] leads to pronounced ∗ These authors contributed equally. † mipu@dtu.dk resonance shift under high optical power, which poses challenges for accessing the red-d...

    work page internal anchor Pith review Pith/arXiv arXiv 2026

  2. [2]

    Therefore, the TM fraction is adjusted to provide sufficient thermal com- pensation while maintaining enough TE power for soliton initiation

    fails to produce a soliton step. Therefore, the TM fraction is adjusted to provide sufficient thermal com- pensation while maintaining enough TE power for soliton initiation. As shown in Figs. 3(a) and 3(b), soliton steps corresponding to different soliton numbers are observed when the pump is obliquely polarized. In these plots, the opacity of each trace...

    work page 2079

  3. [3]

    Microresonator-based optical frequency combs,

    T. J. Kippenberg, R. Holzwarth, and S. A. Diddams, “Microresonator-based optical frequency combs,” Science 332, 555–559 (2011)

    work page 2011

  4. [4]

    Efficient microresonator frequency combs,

    Q. F. Yang, Y. Hu, V. Torres-Company, and K. Va- hala, “Efficient microresonator frequency combs,” eLight 4(2024)

    work page 2024

  5. [5]

    Coherent terabit communications with microresonator Kerr fre- quency combs,

    J. Pfeifle, V. Brasch, M. Lauermann,et al., “Coherent terabit communications with microresonator Kerr fre- quency combs,” Nat. Photonics8, 375–380 (2014)

    work page 2014

  6. [6]

    Microresonator-based solitons for massively parallel co- herent optical communications,

    P. Marin-Palomo, J. N. Kemal, M. Karpov,et al., “Microresonator-based solitons for massively parallel co- herent optical communications,” Nature546, 274–279 (2017)

    work page 2017

  7. [7]

    Microres- onator soliton dual-comb spectroscopy,

    M.-G. Suh, Q.-F. Yang, K. Y. Yang,et al., “Microres- onator soliton dual-comb spectroscopy,” Science354, 600–603 (2016)

    work page 2016

  8. [8]

    Silicon-chip- based mid-infrared dual-comb spectroscopy,

    M. Yu, Y. Okawachi, A. G. Griffith,et al., “Silicon-chip- based mid-infrared dual-comb spectroscopy,” Nat. Com- mun.9, 1869 (2018)

    work page 2018

  9. [9]

    Microresonator soli- ton dual-comb imaging,

    C. Bao, M.-G. Suh, and K. Vahala, “Microresonator soli- ton dual-comb imaging,” Optica6, 1110 (2019)

    work page 2019

  10. [10]

    Soliton microcomb based spectral domain optical coher- ence tomography,

    P. J. Marchand, J. Riemensberger, J. C. Skehan,et al., “Soliton microcomb based spectral domain optical coher- ence tomography,” Nat. Commun.12, 427 (2021)

    work page 2021

  11. [11]

    Ultrafast optical ranging using microresonator soliton frequency combs,

    P. Trocha, M. Karpov, D. Ganin,et al., “Ultrafast optical ranging using microresonator soliton frequency combs,” Science359, 887–891 (2018)

    work page 2018

  12. [12]

    Massively parallel coherent laser ranging using a soli- ton microcomb,

    J. Riemensberger, A. Lukashchuk, M. Karpov,et al., “Massively parallel coherent laser ranging using a soli- ton microcomb,” Nature581, 164–170 (2020)

    work page 2020

  13. [13]

    Photonic-chip-based frequency combs,

    A. L. Gaeta, M. Lipson, and T. J. Kippenberg, “Photonic-chip-based frequency combs,” Nat. Photonics 13, 158–169 (2019)

    work page 2019

  14. [14]

    Silicon- chip mid-infrared frequency comb generation,

    A. G. Griffith, R. K. Lau, J. Cardenas,et al., “Silicon- chip mid-infrared frequency comb generation,” Nat. Commun.6, 6299 (2015)

    work page 2015

  15. [15]

    Optical frequency comb generation from a monolithic microres- onator,

    P. Del’Haye, A. Schliesser, O. Arcizet,et al., “Optical frequency comb generation from a monolithic microres- onator,” Nature450, 1214–1217 (2007)

    work page 2007

  16. [16]

    Soliton frequency comb at microwave rates in a high-Q silica microres- onator,

    X. Yi, Q.-F. Yang, K. Y. Yang,et al., “Soliton frequency comb at microwave rates in a high-Q silica microres- onator,” Optica2, 1078 (2015). 7

    work page 2015

  17. [17]

    CMOS- compatible integrated optical hyper-parametric oscilla- tor,

    L. Razzari, D. Duchesne, M. Ferrera,et al., “CMOS- compatible integrated optical hyper-parametric oscilla- tor,” Nat. Photonics4, 41–45 (2010)

    work page 2010

  18. [18]

    Di- rect soliton generation in microresonators,

    C. Bao, Y. Xuan, J. A. Jaramillo-Villegas,et al., “Di- rect soliton generation in microresonators,” Opt. Lett. 42, 2519 (2017)

    work page 2017

  19. [19]

    Octave- spanning dissipative Kerr soliton frequency combs in Si 3N 4 microresonators,

    M. H. P. Pfeiffer, C. Herkommer, J. Liu,et al., “Octave- spanning dissipative Kerr soliton frequency combs in Si 3N 4 microresonators,” Optica4, 684 (2017)

    work page 2017

  20. [20]

    Pho- tonic chipbased optical frequency comb using soliton Cherenkov radiation,

    V. Brasch, M. Geiselmann, T. Herr,et al., “Pho- tonic chipbased optical frequency comb using soliton Cherenkov radiation,” Science351, 357–360 (2016)

    work page 2016

  21. [21]

    Thermally con- trolled comb generation and soliton modelocking in mi- croresonators,

    C. Joshi, J. K. Jang, K. Luke,et al., “Thermally con- trolled comb generation and soliton modelocking in mi- croresonators,” Opt. Lett.41, 2565 (2016)

    work page 2016

  22. [22]

    Stably accessing octave-spanning microresonator frequency combs in the soliton regime,

    Q. Li, T. C. Briles, D. A. Westly,et al., “Stably accessing octave-spanning microresonator frequency combs in the soliton regime,” Optica4, 193 (2017)

    work page 2017

  23. [23]

    Aluminum nitride nanophotonics for beyond-octave soliton microcomb gen- eration and self-referencing,

    X. Liu, Z. Gong, A. W. Bruch,et al., “Aluminum nitride nanophotonics for beyond-octave soliton microcomb gen- eration and self-referencing,” Nat. Commun.12, 5428 (2021)

    work page 2021

  24. [24]

    Directly access- ing octave-spanning dissipative Kerr soliton frequency combs in an AlN microresonator,

    H. Weng, J. Liu, A. A. Afridi,et al., “Directly access- ing octave-spanning dissipative Kerr soliton frequency combs in an AlN microresonator,” Photonics Res.9, 1351 (2021)

    work page 2021

  25. [25]

    Self-starting bi- chromatic LiNbO 3 soliton microcomb,

    Y. He, Q.-F. Yang, J. Ling,et al., “Self-starting bi- chromatic LiNbO 3 soliton microcomb,” Optica6, 1138 (2019)

    work page 2019

  26. [26]

    Monolithic lithium niobate photonic circuits for Kerr frequency comb gener- ation and modulation,

    C. Wang, M. Zhang, M. Yu,et al., “Monolithic lithium niobate photonic circuits for Kerr frequency comb gener- ation and modulation,” Nat. Commun.10, 978 (2019)

    work page 2019

  27. [27]

    Near-octave lithium niobate soliton microcomb,

    Z. Gong, X. Liu, Y. Xu, and H. X. Tang, “Near-octave lithium niobate soliton microcomb,” Optica7, 1275 (2020)

    work page 2020

  28. [28]

    Integrated Gallium Nitride Nonlinear Photonics,

    Y. Zheng, C. Sun, B. Xiong,et al., “Integrated Gallium Nitride Nonlinear Photonics,” Laser & Photonics Rev. 16, 2100071 (2022)

    work page 2022

  29. [29]

    Integrated gallium phosphide nonlinear photonics,

    D. J. Wilson, K. Schneider, S. H¨ onl,et al., “Integrated gallium phosphide nonlinear photonics,” Nat. Photonics 14, 57–62 (2020)

    work page 2020

  30. [30]

    Ultra-efficient fre- quency comb generation in AlGaAs-on-insulator mi- croresonators,

    L. Chang, W. Xie, H. Shu,et al., “Ultra-efficient fre- quency comb generation in AlGaAs-on-insulator mi- croresonators,” Nat. Commun.11, 1331 (2020)

    work page 2020

  31. [31]

    Efficient frequency comb generation in AlGaAs-on- insulator,

    M. Pu, L. Ottaviano, E. Semenova, and K. Yvind, “Efficient frequency comb generation in AlGaAs-on- insulator,” Optica3, 823 (2016)

    work page 2016

  32. [32]

    Integrated Chalcogenide Photonics for Microresonator Soliton Combs,

    D. Xia, Z. Yang, P. Zeng,et al., “Integrated Chalcogenide Photonics for Microresonator Soliton Combs,” Laser & Photonics Rev.17, 2200219 (2023)

    work page 2023

  33. [33]

    Quantum optics of soliton microcombs,

    M. A. Guidry, D. M. Lukin, K. Y. Yang,et al., “Quantum optics of soliton microcombs,” Nat. Photonics16, 52–58 (2022)

    work page 2022

  34. [34]

    Octave-spanning microcomb generation in 4H-silicon-carbide-on-insulator photonics platform,

    L. Cai, J. Li, R. Wang, and Q. Li, “Octave-spanning microcomb generation in 4H-silicon-carbide-on-insulator photonics platform,” Photonics Res.10, 870 (2022)

    work page 2022

  35. [35]

    Soliton formation and spec- tral translation into visible on CMOS-compatible 4H- silicon-carbide-on-insulator platform,

    C. Wang, J. Li, A. Yi,et al., “Soliton formation and spec- tral translation into visible on CMOS-compatible 4H- silicon-carbide-on-insulator platform,” Light. Sci. Appl. 11(2022)

    work page 2022

  36. [36]

    Efficient Second- Harmonic Generation in Silicon Carbide Nanowaveg- uides,

    Y. Zheng, A. Yi, C. Ye,et al., “Efficient Second- Harmonic Generation in Silicon Carbide Nanowaveg- uides,” ACS Photonics12, 4879–4885 (2025)

    work page 2025

  37. [37]

    4H-SiC microring res- onators for nonlinear integrated photonics,

    Y. Zheng, M. Pu, A. Yi,et al., “4H-SiC microring res- onators for nonlinear integrated photonics,” Opt. Lett. 44, 5784 (2019)

    work page 2019

  38. [38]

    4H-silicon- carbide-on-insulator for integrated quantum and nonlin- ear photonics,

    D. M. Lukin, C. Dory, M. A. Guidry,et al., “4H-silicon- carbide-on-insulator for integrated quantum and nonlin- ear photonics,” Nat. Photonics14, 330–334 (2020)

    work page 2020

  39. [39]

    Thermal Behav- iors and Optical Parametric Oscillation in 4HSilicon Car- bide Integrated Platforms,

    X. Shi, W. Fan, A. K. Hansen,et al., “Thermal Behav- iors and Optical Parametric Oscillation in 4HSilicon Car- bide Integrated Platforms,” Adv. Photonics Res.2, 1–7 (2021)

    work page 2021

  40. [40]

    Measurements of the re- fractive indices and thermo-optic coefficients of Si 3N 4 and SiO x using microring resonances,

    A. Arbabi and L. L. Goddard, “Measurements of the re- fractive indices and thermo-optic coefficients of Si 3N 4 and SiO x using microring resonances,” Opt. Lett.38, 3878 (2013)

    work page 2013

  41. [41]

    Universal dynamics and deterministic switching of dissipative Kerr solitons in optical microresonators,

    H. Guo, M. Karpov, E. Lucas,et al., “Universal dynamics and deterministic switching of dissipative Kerr solitons in optical microresonators,” Nat. Phys.13, 94–102 (2017)

    work page 2017

  42. [42]

    Thermal tuning of Kerr frequency combs in silicon nitride microring res- onators,

    X. Xue, Y. Xuan, C. Wang,et al., “Thermal tuning of Kerr frequency combs in silicon nitride microring res- onators,” Opt. Express24, 687 (2016)

    work page 2016

  43. [43]

    Ac- tive capture and stabilization of temporal solitons in mi- croresonators,

    X. Yi, Q.-F. Yang, K. Youl Yang, and K. Vahala, “Ac- tive capture and stabilization of temporal solitons in mi- croresonators,” Opt. Lett.41, 2037 (2016)

    work page 2037

  44. [44]

    Bringing short-lived dissipative Kerr soli- ton states in microresonators into a steady state,

    V. Brasch, M. Geiselmann, M. H. P. Pfeiffer, and T. J. Kippenberg, “Bringing short-lived dissipative Kerr soli- ton states in microresonators into a steady state,” Opt. Express24, 29312 (2016)

    work page 2016

  45. [45]

    AlGaAs soliton micro- combs at room temperature,

    L. Wu, W. Xie, C. Xiang,et al., “AlGaAs soliton micro- combs at room temperature,” Opt. Lett.48, 3853–3856 (2023)

    work page 2023

  46. [46]

    High-power, thermally accessible dissipative Kerr soliton generation,

    A. Jacobsen, Y. Zhao, Y. Liu,et al., “High-power, thermally accessible dissipative Kerr soliton generation,” Photonics Res.13, 3164 (2025)

    work page 2025

  47. [47]

    Sub-milliwatt- level microresonator solitons with extended access range using an auxiliary laser,

    S. Zhang, J. M. Silver, L. Del Bino,et al., “Sub-milliwatt- level microresonator solitons with extended access range using an auxiliary laser,” Optica6, 206 (2019)

    work page 2019

  48. [48]

    Soliton bursts and deterministic dissipative Kerr soliton generation in auxiliary-assisted microcavities,

    H. Zhou, Y. Geng, W. Cui,et al., “Soliton bursts and deterministic dissipative Kerr soliton generation in auxiliary-assisted microcavities,” Light. Sci. Appl.8 (2019)

    work page 2019

  49. [49]

    Soliton Burst and BiDirectional Switching in the Platform with Pos- itive ThermalRefractive Coefficient Using an Auxiliary Laser,

    Y. Zhao, L. Chen, C. Zhang,et al., “Soliton Burst and BiDirectional Switching in the Platform with Pos- itive ThermalRefractive Coefficient Using an Auxiliary Laser,” Laser & Photonics Rev.15, 2100264 (2021)

    work page 2021

  50. [50]

    Thermal Management in AlGaAs-On-Insulator Microresonators: Enabling and Extending Soliton Comb Generation,

    Y. Zhao, C. Ye, Y. Liu,et al., “Thermal Management in AlGaAs-On-Insulator Microresonators: Enabling and Extending Soliton Comb Generation,” Laser Photonics Rev.19(2025)

    work page 2025

  51. [51]

    Directly access- ing the single-soliton state of a Kerr microcomb and its universal scaling law [Invited],

    W. Sun, J. Li, R. Wang, and Q. Li, “Directly access- ing the single-soliton state of a Kerr microcomb and its universal scaling law [Invited],” Opt. Mater. Express14, 2938 (2024)

    work page 2024

  52. [52]

    Octave-Spanning, Deterministic Single Soliton Generation in 4H-Silicon Carbide-On-Insulator Microring Resonators,

    Y. Zheng, L. Zhou, C. Wang,et al., “Octave-Spanning, Deterministic Single Soliton Generation in 4H-Silicon Carbide-On-Insulator Microring Resonators,” Laser Pho- tonics Rev. p. e01782 (2026)

    work page 2026

  53. [53]

    Thermal noise reduction in soliton microcombs via laser self-cooling,

    F. Lei, Z. Ye, and V. Torres-Company, “Thermal noise reduction in soliton microcombs via laser self-cooling,” Opt. Lett.47, 513 (2022)

    work page 2022

  54. [54]

    Low phase noise K-band signal generation using polarization di- verse single-soliton integrated microcombs,

    A. Aldhafeeri, H.-H. Chin, T. Melton,et al., “Low phase noise K-band signal generation using polarization di- verse single-soliton integrated microcombs,” Photonics Res.12, 1175 (2024). 8

    work page 2024

  55. [55]

    Dual-mode microres- onators as straightforward access to octave-spanning dis- sipative Kerr solitons,

    H. Weng, A. A. Afridi, J. Li,et al., “Dual-mode microres- onators as straightforward access to octave-spanning dis- sipative Kerr solitons,” APL Photonics7(2022)

    work page 2022

  56. [56]

    Turn- key Kerr soliton generation and tunable microwave syn- thesizer in dual-mode Si 3 N 4 microresonators,

    H. Weng, M. McDermott, A. A. Afridi,et al., “Turn- key Kerr soliton generation and tunable microwave syn- thesizer in dual-mode Si 3 N 4 microresonators,” Opt. Express32, 3123 (2024)

    work page 2024

  57. [57]

    Design and Fabrication of AlGaAs-on-Insulator Microring Resonators for Non- linear Photonics,

    C. Kim, C. Ye, Y. Zheng,et al., “Design and Fabrication of AlGaAs-on-Insulator Microring Resonators for Non- linear Photonics,” IEEE J. Sel. Top. Quantum Electron. 29(2023)

    work page 2023

  58. [58]

    High-quality- factor AlGaAs-on-sapphire microring resonators,

    Y. Zheng, M. Pu, H. K. Sahoo,et al., “High-quality- factor AlGaAs-on-sapphire microring resonators,” J. Light. Technol.37, 868–874 (2019)

    work page 2019

  59. [59]

    High-quality factor, high- confinement microring resonators in 4H-silicon carbide- on-insulator,

    Y. Zheng, M. Pu, A. Yi,et al., “High-quality factor, high- confinement microring resonators in 4H-silicon carbide- on-insulator,” Opt. Express27, 13053 (2019)

    work page 2019

  60. [60]

    Robust Multi- mode Waveguide Design for Avoided Mode Crossing- Suppressed Microresonators,

    C. Ye, C. Kim, Y. Zheng,et al., “Robust Multi- mode Waveguide Design for Avoided Mode Crossing- Suppressed Microresonators,” J. Light. Technol.41, 4755–4761 (2023)

    work page 2023

  61. [61]

    Engineered mode coupling in high-Q microresonators enables deterministic low-repetition-rate soliton microcombs,

    Y. Zheng, Y. Liu, H. Tan,et al., “Engineered mode coupling in high-Q microresonators enables deterministic low-repetition-rate soliton microcombs,” arXiv preprint arXiv:2512.02739 (2025)

    work page arXiv 2025

  62. [62]

    Backscat- tering in silicon microring resonators: A quantitative analysis,

    A. Li, T. Van Vaerenbergh, P. De Heyn,et al., “Backscat- tering in silicon microring resonators: A quantitative analysis,” Laser Photonics Rev.10, 420–431 (2016)

    work page 2016

  63. [63]

    Single Soliton Comb Generation in SiC Microresonators via Thermal Compen- sation Using Obliquely Polarized Pumping,

    H. Tan, Y. Zheng, X. Lu,et al., “Single Soliton Comb Generation in SiC Microresonators via Thermal Compen- sation Using Obliquely Polarized Pumping,” in2025 Eu- ropean Conference on Optical Communications (ECOC), (IEEE, 2025), 1, p. 11263186

    work page 2025

  64. [64]

    Accessing Soliton Micro- combs With Pump Phase Modulation Switch,

    Z. Shi, S. Sun, S. Li,et al., “Accessing Soliton Micro- combs With Pump Phase Modulation Switch,” Laser Photonics Rev. p. e02768 (2026)

    work page 2026