pith. sign in

arxiv: 2606.07153 · v1 · pith:23TOQHPKnew · submitted 2026-06-05 · 🧮 math.NA · cs.LG· cs.NA· math.OC

No-Harm Physics-Informed Inverse Learning with Residual-Calibrated Uncertainty

Pith reviewed 2026-06-27 21:21 UTC · model grok-4.3

classification 🧮 math.NA cs.LGcs.NAmath.OC
keywords physics-informed inverse problemsresidual calibrationuncertainty quantificationcertification frameworkconditional stability estimatePDE inverse problemsno-harm selection
0
0 comments X

The pith

A learned PDE inverse solution is kept only if its residual-calibrated uncertainty radius is no larger than the baseline radius plus a safety margin.

A machine-rendered reading of the paper's core claim, the machinery that carries it, and where it could break.

The paper develops a certification-and-selection layer for physics-informed methods that solve inverse problems for partial differential equations. It forms a deterministic uncertainty radius from the combined data, physics, boundary or initial-condition, and optimization residuals, then accepts the learned reconstruction only when this radius satisfies R_learn ≤ R_base + ε_safe; otherwise it returns the baseline method. The conversion of residuals into an error bound rests on a conditional stability estimate. A high-probability version of the certificate is also given when the physics residual is estimated from independent random collocation points. Numerical experiments on source recovery, heat reconstruction, tomography, coefficient identification, and stochastic validation show the selector accepts certified gains while rejecting unreliable outputs.

Core claim

Under a conditional stability estimate the sum of data, physics, boundary/initial-condition and optimization residuals produces an a posteriori reconstruction-error bound and a deterministic uncertainty radius; a learned reconstruction is therefore accepted only when R_learn ≤ R_base + ε_safe and is otherwise replaced by the baseline.

What carries the argument

The residual-calibrated uncertainty radius obtained by combining data, physics, boundary/initial-condition and optimization residuals under a conditional stability estimate, which supplies both the a posteriori error bound and the no-harm acceptance test.

If this is right

  • The selector returns the baseline whenever a learned candidate is shifted, hallucinated or unfinished.
  • The method grows conservative as the underlying inverse problem becomes more strongly ill-posed.
  • High-probability certificates continue to hold when physics residuals are computed from independent random collocation points.
  • The framework functions as an add-on certification layer rather than a new reconstruction architecture.

Where Pith is reading between the lines

These are editorial extensions of the paper, not claims the author makes directly.

  • The same residual-to-radius conversion could be tested on forward problems or non-PDE inverse tasks whenever an analogous stability relation can be stated.
  • The acceptance test supplies an automatic rejection signal that could be used to compare or prune different network architectures during training.

Load-bearing premise

A conditional stability estimate exists that turns the sum of the residuals into a bound on the reconstruction error.

What would settle it

A concrete inverse problem in which the combined residuals remain below a chosen threshold yet the true reconstruction error exceeds the radius predicted by the stability estimate.

Figures

Figures reproduced from arXiv: 2606.07153 by Ronald Katende.

Figure 1
Figure 1. Figure 1: No-harm sufficiency boundary. The learned reconstruction is selected only when [PITH_FULL_IMAGE:figures/full_fig_p017_1.png] view at source ↗
Figure 2
Figure 2. Figure 2: Acceptance-rate heatmap for the representative [PITH_FULL_IMAGE:figures/full_fig_p019_2.png] view at source ↗
Figure 5
Figure 5. Figure 5: Median certificate ratio Rlearn/Rbase over ob￾servation count and noise level for σlearn = 0.05 and µ = 0.02. Values above one lie outside the certificate￾sufficient region. The figure shows that increased obser￾vation density can reduce the ratio, but physics inconsis￾tency can still keep the learned reconstruction outside the no-harm acceptance region. The sufficiency sweep answers the threshold question… view at source ↗
Figure 6
Figure 6. Figure 6: Representative PDE-based reconstructions for the Poisson and inverse heat experiments. The left panel shows [PITH_FULL_IMAGE:figures/full_fig_p020_6.png] view at source ↗
Figure 7
Figure 7. Figure 7: Coefficient-recovery and residual-field diagnostics. The left panel shows the geophysical-style elliptic [PITH_FULL_IMAGE:figures/full_fig_p020_7.png] view at source ↗
Figure 8
Figure 8. Figure 8: Limited-angle tomography reconstruction comparison. The figure compares the baseline, learned, and [PITH_FULL_IMAGE:figures/full_fig_p021_8.png] view at source ↗
Figure 9
Figure 9. Figure 9: Three-dimensional tomography surface comparison. The figure compares the true reconstruction target with [PITH_FULL_IMAGE:figures/full_fig_p021_9.png] view at source ↗
Figure 10
Figure 10. Figure 10: Problem-specific certificate diagnostics. The left panel compares the true reconstruction error with the [PITH_FULL_IMAGE:figures/full_fig_p022_10.png] view at source ↗
Figure 11
Figure 11. Figure 11: Residual-sampling and aggregate calibration diagnostics. The left panel shows the stochastic residual [PITH_FULL_IMAGE:figures/full_fig_p022_11.png] view at source ↗
Figure 12
Figure 12. Figure 12: Aggregate decision diagnostics. The left panel reports empirical coverage of the certified uncertainty sets by [PITH_FULL_IMAGE:figures/full_fig_p023_12.png] view at source ↗
read the original abstract

Physics-informed learning is increasingly used for partial differential equation (PDE)-governed inverse problems, but its reliability remains difficult to certify. This paper develops a no-harm certification-and-selection framework for physics-informed inverse learning. A learned reconstruction is accepted only when its residual-calibrated radius is no worse than the baseline radius, namely when $$R_{\mathrm{learn}}\le R_{\mathrm{base}}+\varepsilon_{\mathrm{safe}};$$otherwise, the method returns the baseline. The certificate combines data, physics, boundary or initial-condition, and optimization residuals. Under a conditional stability estimate, these residuals yield an a posteriori reconstruction-error bound and a deterministic uncertainty radius. A high-probability certificate is also derived for physics residuals estimated from independent random collocation points. Numerical tests on Poisson source recovery, inverse heat reconstruction, limited-angle tomography, elliptic coefficient identification, and stochastic residual validation show that the selector accepts certified improvements, rejects shifted, hallucinated, or unfinished candidates, and becomes conservative in strongly ill-posed regimes. The framework is therefore a certification-and-selection layer, not another reconstruction architecture.

Editorial analysis

A structured set of objections, weighed in public.

Desk editor's note, referee report, simulated authors' rebuttal, and a circularity audit. Tearing a paper down is the easy half of reading it; the pith above is the substance, this is the friction.

Referee Report

2 major / 1 minor

Summary. The paper presents a no-harm certification-and-selection framework for physics-informed inverse learning. It defines a residual-calibrated uncertainty radius from data, physics, boundary/initial-condition, and optimization residuals. Under a conditional stability estimate, this yields an a posteriori reconstruction-error bound. A learned reconstruction is accepted only if R_learn ≤ R_base + ε_safe; otherwise the baseline is returned. High-probability certificates are derived for random collocation points, and the approach is tested on Poisson source recovery, inverse heat, tomography, coefficient identification, and stochastic validation.

Significance. If the conditional stability estimates can be made rigorous with explicit constants for the target inverse problems, the framework offers a practical certification layer that prevents harm from unreliable learned reconstructions while allowing certified improvements. This addresses a central reliability gap in physics-informed methods for ill-posed inverse problems.

major comments (2)
  1. [Abstract] Abstract: The claim that the combined residuals yield an a posteriori reconstruction-error bound and deterministic uncertainty radius depends entirely on an unspecified conditional stability estimate. The manuscript invokes this estimate to convert residuals into the certified radius and the acceptance test but neither derives it, cites it with explicit constants, nor validates its tightness on the Poisson, heat, tomography, or coefficient-identification examples; this is load-bearing for the entire no-harm selector.
  2. [Numerical tests] Numerical experiments (as described in the abstract): The tests show the selector accepting certified improvements and rejecting shifted or hallucinated candidates, but provide no direct verification that the residual-derived radius bounds the true reconstruction error on any example; without this, the certification property remains conditional on the unverified stability premise.
minor comments (1)
  1. The safe margin ε_safe and the precise combination rule for the four residual types should be given explicit definitions and notation in the main text to improve readability.

Simulated Author's Rebuttal

2 responses · 0 unresolved

We thank the referee for the thorough review and for highlighting the central role of the conditional stability estimate. We address the two major comments point by point below.

read point-by-point responses
  1. Referee: [Abstract] Abstract: The claim that the combined residuals yield an a posteriori reconstruction-error bound and deterministic uncertainty radius depends entirely on an unspecified conditional stability estimate. The manuscript invokes this estimate to convert residuals into the certified radius and the acceptance test but neither derives it, cites it with explicit constants, nor validates its tightness on the Poisson, heat, tomography, or coefficient-identification examples; this is load-bearing for the entire no-harm selector.

    Authors: We agree that the conditional stability estimate is the key link converting residuals into a certified radius and that its explicit form is load-bearing. The manuscript treats the estimate as a standard assumption from inverse-problems theory rather than deriving it anew. In revision we will (i) add a short dedicated subsection that cites the relevant conditional-stability results for each of the four example classes, including references that supply explicit constants or rates where they exist in the literature, and (ii) state more explicitly that the no-harm guarantee is conditional on the validity of the cited estimate. Deriving sharp constants from first principles for every test problem lies outside the scope of a certification-layer paper; we therefore treat this as a citation task rather than a derivation task. revision: partial

  2. Referee: [Numerical tests] Numerical experiments (as described in the abstract): The tests show the selector accepting certified improvements and rejecting shifted or hallucinated candidates, but provide no direct verification that the residual-derived radius bounds the true reconstruction error on any example; without this, the certification property remains conditional on the unverified stability premise.

    Authors: The numerical section is intended to demonstrate the selector’s decision rule rather than to furnish an independent empirical proof of the stability estimate. We nevertheless accept that a direct comparison would strengthen the presentation. In the revised manuscript we will add, for every example where the ground truth is known, a supplementary plot or table that juxtaposes the residual-calibrated radius against the observed reconstruction error, thereby providing an empirical check on whether the bound is respected in practice. revision: yes

Circularity Check

0 steps flagged

No significant circularity; framework defined from residuals under external assumption

full rationale

The derivation defines the no-harm selector explicitly as the comparison R_learn ≤ R_base + ε_safe, where the radius itself is constructed from the sum of data/physics/BC/optimization residuals once a conditional stability estimate is assumed. This construction does not reduce any claimed prediction to a fitted parameter or to a self-citation chain; the stability estimate is treated as an external input rather than derived or smuggled via prior work by the same author. No self-definitional, fitted-input, or renaming patterns appear in the abstract or described framework. The result is therefore self-contained against the stated assumptions.

Axiom & Free-Parameter Ledger

0 free parameters · 1 axioms · 0 invented entities

The framework rests on an external conditional stability estimate that maps residuals to error; no free parameters or invented entities are introduced in the abstract, but the stability estimate itself functions as an unproven domain assumption for the certification step.

axioms (1)
  • domain assumption Existence of a conditional stability estimate converting summed residuals into a reconstruction-error bound
    Invoked to obtain the a posteriori bound and uncertainty radius from the residuals

pith-pipeline@v0.9.1-grok · 5722 in / 1225 out tokens · 12191 ms · 2026-06-27T21:21:01.900136+00:00 · methodology

discussion (0)

Sign in with ORCID, Apple, or X to comment. Anyone can read and Pith papers without signing in.

Reference graph

Works this paper leans on

27 extracted references

  1. [1]

    Engl, Martin Hanke, and Andreas Neubauer.Regularization of Inverse Problems, volume 375 of Mathematics and Its Applications

    Heinz W. Engl, Martin Hanke, and Andreas Neubauer.Regularization of Inverse Problems, volume 375 of Mathematics and Its Applications. Kluwer Academic Publishers, Dordrecht, 1996

  2. [2]

    Springer, New York, 2 edition, 2011

    Andreas Kirsch.An Introduction to the Mathematical Theory of Inverse Problems, volume 120 ofApplied Mathematical Sciences. Springer, New York, 2 edition, 2011

  3. [3]

    Springer, New York, 2005

    Jari Kaipio and Erkki Somersalo.Statistical and Computational Inverse Problems, volume 160 ofApplied Mathematical Sciences. Springer, New York, 2005

  4. [4]

    Society for Industrial and Applied Mathematics, Philadelphia, 2010

    Per Christian Hansen.Discrete Inverse Problems: Insight and Algorithms. Society for Industrial and Applied Mathematics, Philadelphia, 2010

  5. [5]

    Tikhonov and Vasiliy Y

    Andrey N. Tikhonov and Vasiliy Y . Arsenin.Solutions of Ill-Posed Problems. Winston, Washington, DC, 1977

  6. [6]

    Oktem, and Carola-Bibiane Sch

    Simon Arridge, Peter Maass, Ozan "Oktem, and Carola-Bibiane Sch"onlieb. Solving inverse problems using data-driven models.Acta Numerica, 28:1–174, 2019

  7. [7]

    Learned primal-dual reconstruction.IEEE Transactions on Medical Imaging, 37(6):1322–1332, 2018

    Jonas Adler and Ozan "Oktem. Learned primal-dual reconstruction.IEEE Transactions on Medical Imaging, 37(6):1322–1332, 2018

  8. [8]

    Fourier neural operator for parametric partial differential equations.International Conference on Learning Representations, 2021

    Zongyi Li, Nikola Kovachki, Kamyar Azizzadenesheli, Burigede Liu, Kaushik Bhattacharya, Andrew Stuart, and Anima Anandkumar. Fourier neural operator for parametric partial differential equations.International Conference on Learning Representations, 2021

  9. [9]

    Vegard Antun, Francesco Renna, Clarice Poon, Ben Adcock, and Anders C. Hansen. On instabilities of deep learning in image reconstruction and the potential costs of AI.Proceedings of the National Academy of Sciences of the United States of America, 117(48):30088–30095, 2020

  10. [10]

    Maziar Raissi, Paris Perdikaris, and George Em Karniadakis. Physics-informed neural networks: A deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations.Journal of Computational Physics, 378:686–707, 2019

  11. [11]

    Kevrekidis, Lu Lu, Paris Perdikaris, Sifan Wang, and Liu Yang

    George Em Karniadakis, Ioannis G. Kevrekidis, Lu Lu, Paris Perdikaris, Sifan Wang, and Liu Yang. Physics- informed machine learning.Nature Reviews Physics, 3(6):422–440, 2021

  12. [12]

    udiger Verf

    R"udiger Verf"urth.A Posteriori Error Estimation Techniques for Finite Element Methods. Oxford University Press, Oxford, 2013

  13. [13]

    T. J. Sullivan.Introduction to Uncertainty Quantification, volume 63 ofTexts in Applied Mathematics. Springer, Cham, 2015

  14. [14]

    Andrew M. Stuart. Inverse problems: A bayesian perspective.Acta Numerica, 19:451–559, 2010

  15. [15]

    Scientific machine learning through physics-informed neural networks: Where we are and what’s next

    Salvatore Cuomo, Vincenzo Schiano Di Cola, Fabio Giampaolo, Gianluigi Rozza, Maziar Raissi, and Francesco Piccialli. Scientific machine learning through physics-informed neural networks: Where we are and what’s next. Journal of Scientific Computing, 92(3):88, 2022

  16. [16]

    Springer, Dordrecht, 2009

    Michael Hinze, Ren’e Pinnau, Michael Ulbrich, and Stefan Ulbrich.Optimization with PDE Constraints, volume 23 ofMathematical Modelling: Theory and Applications. Springer, Dordrecht, 2009

  17. [17]

    Birkh"auser, Basel, 2003

    Wolfgang Bangerth and Rolf Rannacher.Adaptive Finite Element Methods for Differential Equations. Birkh"auser, Basel, 2003

  18. [18]

    Wright.Numerical Optimization

    Jorge Nocedal and Stephen J. Wright.Numerical Optimization. Springer, New York, 2 edition, 2006

  19. [19]

    Bertsekas.Nonlinear Programming

    Dimitri P. Bertsekas.Nonlinear Programming. Athena Scientific, Belmont, MA, 2 edition, 1999. 25 No-Harm Physics-Informed Inverse Learning with Residual-Calibrated Uncertainty

  20. [20]

    Springer, New York, 2 edition, 2006

    Victor Isakov.Inverse Problems for Partial Differential Equations, volume 127 ofApplied Mathematical Sciences. Springer, New York, 2 edition, 2006

  21. [21]

    Carleman estimates for parabolic equations and applications.Inverse Problems, 25(12):123013, 2009

    Masahiro Yamamoto. Carleman estimates for parabolic equations and applications.Inverse Problems, 25(12):123013, 2009

  22. [22]

    Vapnik.Statistical Learning Theory

    Vladimir N. Vapnik.Statistical Learning Theory. Wiley, New York, 1998

  23. [23]

    Cambridge University Press, Cambridge, 2014

    Shai Shalev-Shwartz and Shai Ben-David.Understanding Machine Learning: From Theory to Algorithms. Cambridge University Press, Cambridge, 2014

  24. [24]

    Tyrrell Rockafellar and Roger J.-B

    R. Tyrrell Rockafellar and Roger J.-B. Wets.Variational Analysis, volume 317 ofGrundlehren der mathematischen Wissenschaften. Springer, Berlin, 1998

  25. [25]

    Error bounds and convergence analysis of feasible descent methods: A general approach.Annals of Operations Research, 46(1):157–178, 1993

    Zhi-Quan Luo and Paul Tseng. Error bounds and convergence analysis of feasible descent methods: A general approach.Annals of Operations Research, 46(1):157–178, 1993

  26. [26]

    Proximal alternating linearized minimization for nonconvex and nonsmooth problems.Mathematical Programming, 146(1–2):459–494, 2014

    Jérôme Bolte, Shoham Sabach, and Marc Teboulle. Proximal alternating linearized minimization for nonconvex and nonsmooth problems.Mathematical Programming, 146(1–2):459–494, 2014

  27. [27]

    Probability inequalities for sums of bounded random variables.Journal of the American Statistical Association, 58(301):13–30, 1963

    Wassily Hoeffding. Probability inequalities for sums of bounded random variables.Journal of the American Statistical Association, 58(301):13–30, 1963. A Proofs of theoretical results This appendix gives the proofs of the theoretical results stated in the main text. The notation is the same as in Sections 2–7. Definitions and assumptions are not reproved. ...