Pith.

Differential Geometry · arXiv:2505.18834 v1 · submitted 24 May 2025 · 49 references

On quasi-Einstein manifolds with constant scalar curvature

Johnatan Costa, Ernani Ribeiro Jr, Márcio Santos

The paper says

“In this article, we study quasi-Einstein manifolds with constant scalar curvature.”

more of the abstract

We provide a classification of compact and noncompact (possibly with boundary) T-flat quasi-Einstein manifolds with constant scalar curvature, where the T-tensor is directly related to the Cotton and Weyl tensors. Moreover, we construct new explicit examples of noncompact quasi-Einstein manifolds. In addition, we prove a complete classification of compact and noncompact (possibly with boundary) 3-dimensional m-quasi-Einstein manifolds with constant scalar curvature.

from the abstract

Pith says

Machine review · deepseek-v4-flash · 7 Aug 2026 · what was read was not recorded · not checked by a person

It can be wrong. Challenge this review or reply to it.

Holds up, with conditions. Theorem 2's proof has a discriminant error and an unjustified parallelism step; the classification may be right but the paper needs major revision. This line is wrong

3 major objections · 4 minor

How often objections from reviews like this one are right: not yet measured

Are you an author? What you can do.

Not checked: figures, code, what the 49 references say.

The paper says, at §4.2, Eq. (4.6)

The review did not quote this passage.

Pith says: Objection 1 of 3 · major

The discriminant computation for the quadratic in μ3 is incorrect. From 2μ3^2 − 2(2λ − (m+2)ρ)μ3 + (2λ − (m+2)ρ)(λ − (m+1)ρ) = 0, the discriminant is Δ = 4(2λ − (m+2)ρ)^2 − 8(2λ − (m+2)ρ)(λ − (m+1)ρ) = 4mρ(2λ − (m+2)ρ), not 4mρ(2λ − (m+2)ρ)^2 as printed.

more of objection 1

With the correct Δ, the condition Δ ≥ 0 does not force ρ = 0 or ρ = 2λ/(m+2); for example, m=2, λ=−1, ρ=−1/4 gives Δ=2 and real distinct roots with nonzero product. In that case R = 2λ − (m−1)ρ = −7/4, and Eq. (3.7) gives T ≠ 0, so the proof has not excluded the desired configurations. This invalidates the case analysis inside Theorem 2.

The paper says, at §4.2, zero-product case

The review did not quote this passage.

Pith says: Objection 2 of 3 · major

The step 'all eigenvalues of P are constant, and hence P is parallel' is false for a general symmetric (0,2)-tensor field: constant eigenvalues do not imply that the eigenspaces are parallel, nor that the tensor is parallel. This inference is load-bearing because it is used to conclude that the Cotton tensor vanishes and then that T ≡ 0 via Lemma 1. Without a proof of parallelism from the quasi-Einstein equations, the conclusion that the manifold is Einstein does not follow.

This review says the paper's mathematics is wrong. Pith did not check that against the paper's source.

The paper says, at §4.1, proof of Theorem 1

The review did not quote this passage.

Pith says: Objection 3 of 3 · major

The same fallacy appears in the proof of Theorem 1: after showing that the Ricci eigenvalues are λ1=0 and λ2=...=λn=λ, the text states 'since the Ricci tensor is parallel'. Constant eigenvalues alone do not imply that Ric is parallel. This step is essential for invoking [35, Theorem 1.2] and for the splitting argument. Thus Theorem 1 is also not established as written.

4 minor objections

The paper says, at Theorem 2 statement

Pith says: minor objection 1 of 4

The statement contains a grammatical error: 'm-quasi-Einstein manifolds' should be 'm-quasi-Einstein manifold'.

The paper says, at §3, Proposition 7 proof

Pith says: minor objection 2 of 4

The symbol θ is used twice with different expressions in the same proof (first with denominator n(n−1)(n−2)(m−1)^2, then redefined as m/((n−1)(m−1)^2)); this should be disambiguated.

show 2 more

The paper says, at §2, Lemma 3 and Proposition 6

Pith says: minor objection 3 of 4

Lemma 3 and Proposition 6 are imported from the authors' previous work [27] without proof; since they are central to the paper, the authors should either state them with precise references or include proofs to make the paper more self-contained.

The paper says, at General presentation

Pith says: minor objection 4 of 4

The title and abstract contain typographical artifacts ('CONST ANT SCALAR CUR V A TURE'); the manuscript should be carefully proofread.

What would settle it

Symbolically recompute the discriminant in §4.2 and solve (4.3)–(4.5) without assuming parallelism. Verify that the parameter set m=2, λ=−1, ρ=−1/4 satisfies all displayed identities with real distinct µ2, µ3 and µ2µ3≠0, and that (3.7) gives T≠0; this directly refutes the proof's claim that the eigenvalue equations force ρ=0. Then decide whether any complete 3D quasi-Einstein metric realizes these parameters: search the rigid classification of [37, Prop. 2.4] and the examples in Proposition 5 of the paper. If such a metric exists, Theorem 2 is false; if none exists, the missing global argument that excludes the configuration must be supplied.

from the skeptic's reading

How the review went

4 readings by deepseek-v4-flash · 7 Aug 2026

  1. Reader holds up, with conditions confidence moderate
  2. Skeptic partly agrees 2 min 55 s · 17,793 tokens read, 23,295 written
  3. Editor wrote the verdict above 36 s · 18,692 tokens read, 4,751 written
  4. Referee major revision: 3 major objections, 4 minor 44 s · 18,153 tokens read, 5,985 written

Not run on this paper: the simulated authors' defence.

Pith did not check this review's objections against the paper.

The review in full

The review in brief, machine-written

Quick take: this is a paper with a real result in it, but the proof of the main classification has a load-bearing gap that the authors seem to have missed. I'd send it back for a major revision, not desk reject it.

What's actually new: Theorem 1 gives a T-flat classification for m-quasi-Einstein manifolds with constant scalar curvature, and Theorem 3 gives a list of possible scalar curvature values for noncompact λ<0, μ<0 cases. Those are useful and not in the literature. The derivations up to Eq. (3.7), especially Proposition 7, are clean and correct. The connection to the D-flat soliton work is appropriate.

But the proof of Theorem 2 does not establish T=0. In §4.2, the discriminant for the quadratic in μ3 is Δ = 4mρ(2λ−(m+2)ρ), not 4mρ(2λ−(m+2)ρ)2 as written. With the correct discriminant, the condition Δ≥0 does not force ρ=0 or R=2λ. The stress-test example (m=2, λ=−1, ρ=−1/4) gives S=−1, Δ=2, R=−7/4, and then T≠0. That is a concrete counterexample to the proof's logic, not just a missing step.

The other soft spot is the repeated inference that constant eigenvalues of P imply P is parallel. That is false in general. In the zero-product case they need this to conclude the Cotton tensor vanishes, and then they misapply Proposition 6: with P having eigenvalues 0, a, 0, the eigenspace of the repeated eigenvalue is not (∇u)^⊥, so Proposition 6 would actually give T≠0, not T=0. So both branches of the argument fail to eliminate non-Einstein, non-product configurations.

Minor issues: the abstract omits 'simply connected' and 'm>1' from the statement of Theorem 2, which overstates the result. The 'new examples' in Example 1 and Proposition 5 are products of known rigid examples from [37, Prop 2.4], so the novelty there is thin.

Who should read this: people working on quasi-Einstein manifolds and warped product Einstein metrics. The T-flat classification and Theorem 3 might survive with a repaired proof. It deserves a serious referee, but the current version should not be accepted. I'd recommend the editor send it back for major revision with the authors asked to fix the discriminant, prove or cite the parallel lemma, and correct the abstract.

The strongest objection

Section 4.2 aims to force T=0, but two steps are invalid. (1) In the nonzero-product case, the quadratic for µ3 is 2µ3^2 − 2Sµ3 + SB = 0, where S = 2λ − (m+2)ρ and B = λ − (m+1)ρ. Its discriminant is Δ = 4S^2 − 8SB = 4S(S−2B) = 4mρS, not 4mρS^2 as written. With the correct Δ and ρ ≤ 0, the condition Δ ≥ 0 does not force ρ=0: take m=2, λ=−1, ρ=−1/4, so S=−1, Δ=2, and the two eigenvalues are real, distinct, and have nonzero product. But then R = 2λ − (m−1)ρ = −7/4, and equation (3.7) gives T ≠ 0. Hence the conclusion ρ=0, R=2λ, T=0 is unsupported. (2) In the zero-product case, the proof needs the claim that all eigenvalues of P are constant, and hence P is parallel, to get C=0 and then T=0. This is not a general theorem and is not proved here. If P has constant eigenvalues 0,a,0 with a ≠ 0, P need not be parallel; then Proposition 6 gives T ≠ 0 because the repeated-eigenvalue eigenspace is not (∇u)^⊥. Thus the proof has not eliminated non-Einstein, non-product configurations with T ≠ 0 in dimension 3, which is exactly what Theorem 2 must exclude.

The reader's weakest assumption is valid: the statement 'all eigenvalues of P are constant, and hence P is parallel' is used without proof and is not a general fact. My reading strengthens this concern by identifying a second, independent flaw in the same section: the discriminant computation leading to ρ=0 in the nonzero-product case is algebraically wrong. With the correct discriminant, there are real eigenvalue configurations satisfying all of the paper's identities for which equation (3.7) gives T≠0; the proof therefore does not establish the T=0 reduction on which the classification rests. I do not claim the theorem is false: known rigidity results, e.g. [37, Theorem 1.3] in the no-boundary setting, may ultimately exclude the extra configurations, and the listed examples may still be correct. But the present text does not provide the needed argument, and the errors are concrete enough to require revision. The reader's CONDITIONAL verdict remains appropriate: the gaps are identifiable and possibly fixable, but the proof as written is incomplete.

The referee's report

If correct, the classification in Theorem 2 would complete the 3-dimensional picture and significantly extend rigidity results of He–Petersen–Wylie [37] and the recent compact boundary case of [27]. The T-tensor framework and the new explicit example are useful contributions. However, the proof of Theorem 2 contains a concrete algebraic error in the discriminant computation and a false inference about parallel tensors, both of which are load-bearing. The same parallel-tensor inference affects the proof of Theorem 1. Since the central classification is not established as written, the paper requires substantial revision.

Pith's reading of the paper (a machine's summary, not the authors')

This paper studies how rigid quasi-Einstein metrics become when the scalar curvature is constant. It proves a complete classification of nontrivial simply connected 3-dimensional m-quasi-Einstein manifolds with m>1 and constant scalar curvature, allowing noncompact topology and nonempty boundary: such a space must be one of six explicit model geometries. In all dimensions n≥3, it classifies the T-flat case, where a certain 3-tensor built from the Cotton and Weyl tensors vanishes. The paper also constructs new noncompact examples, including rigid non-Einstein products $H^{{p+1}}$×H^q, and lists the discrete set of scalar-curvature values such noncompact spaces can carry when λ<0 and μ<0. These statements matter because quasi-Einstein metrics are exactly the base metrics of warped-product Einstein metrics, so the classification constrains which Einstein metrics can be built that way.

What carries the argument. The key tool is the 3-tensor T, defined in equation (1.4), which satisfies uC_{ijk}=mW_{ijkl}∇^l u+T_{ijk}; T measures the failure of a Cotton–Weyl relation, and T=0 is called T-flat. The proof also uses the auxiliary tensor P=Ric−((n−1)λ−R)/(m−1)g, for which ∇u is an eigenvector, together with the 4-tensor Q built from the Riemann tensor, P⊙g and g⊙g; identities in Lemma 2 link Q to the Cotton tensor. In dimension three the Weyl tensor vanishes, so the proof diagonalizes P and uses the constancy of its eigenvalues to conclude the Cotton tensor vanishes, forcing T=0 and reducing to known models. The paper builds new examples as products $H^{{p+1}}$×H^q with a warped metric and potential u=$\cosh$ r.

Core claim. The central claim is Theorem 2: a noncompact nontrivial 3-dimensional simply connected m-quasi-Einstein manifold (m>1), possibly with boundary, has constant scalar curvature if and only if it is isometric to one of (i) $H^{3}$, (ii) [0,∞)×$H^{2}$ with g=$dt^{2}$+$\cosh$^2(t)g_{$H^{2}$}, (iii) [0,∞)×$H^{2}$ with the product metric, (iv) R×$R^{2}$ with g=$dt^{2}$+$e^{{2√(-k)t}}$g_{$R^{2}$}, (v) R×$H^{2}$ with the product metric, or (vi) [0,∞)×$R^{2}$ with the product metric. In all dimensions, Theorem 1 classifies T-flat manifolds with constant scalar curvature and m>1: T vanishes exactly for the standard hemisphere, the product cylinder I×N, the half-space [0,∞)×F, hyperbolic space, two warped products over a λ-Einstein base, and three product spaces over a λ-Einstein base with potential $\cosh$, e^t, or $\sinh$. The proof proceeds by showing that under constant scalar curvature the potential is transnormal and isoparametric, that the possible scalar curvatures lie on a discrete list indexed by κ∈{0,...,n}, and that in three dimensions the tensor P has constant eigenvalues, which is used to force the Cotton tensor to vanish and reduce to known rigid models.

The premise it rests on. The argument's load-bearing step is that a symmetric tensor whose eigenvalues are constant must be parallel; this is not true for general tensors, and it is exactly what forces the Cotton tensor to vanish and makes the classification close.

If the paper is right (Pith's inferences, not the authors')

In dimension 3, constant scalar curvature forces rigidity of the whole manifold: every noncompact example is Einstein or a warped/product structure over H^2, R^2, or a λ-Einstein surface, so no genuinely new non-rigid 3D examples exist.

The theorem extends the earlier compact-with-boundary classification by the same authors: combining Corollary 1 with the compact case yields a full list of all simply connected 3D m-quasi-Einstein manifolds with m>1 and constant scalar curvature, compact or not.

The classification shows that for λ=0 any nontrivial such manifold is [0,∞)×F with F Ricci flat, with a linear potential.

The T-flat classification gives nine model spaces that depend only on the sign of λ and the λ-Einstein base, so T-flatness plus constant scalar curvature is a very strong rigidity condition.

One testable extension: the T-flat condition appears to be the quasi-Einstein analogue of the D-flat condition in Ricci soliton theory; by analogy, other curvature conditions (harmonic Weyl, Bach-flatness, or vanishing of related tensors) may imply T-flatness, which would automatically extend Theorem 1 to those settings.

Theorem 3's discrete list R=(κ(m−n)+n(n−1))/(m+n−κ−1)λ suggests a gap phenomenon: for fixed m, n, and λ, constant scalar curvature can only take n+1 values. A natural test is to construct examples realizing each κ using the warped-product families of Proposition 5.

The hidden assumption that constant eigenvalues force a tensor to be parallel is worth checking. If it holds only under the quasi-Einstein equations, the proof could be repaired with a short lemma; if it fails, the 3D list may be missing non-rigid examples.

Because quasi-Einstein metrics with boundary model static near-horizon geometries, the explicit examples here may serve as test models for horizon rigidity questions.

Check this review

Pith stored no record of this review's passes and took no fingerprint of it. Reviews made by code from 13 Nov 2026 on carry both.

How often reviews like this one are right

Reviews like this one: written by deepseek-v4-flash, where what was read was not recorded.

How often objections from reviews like this one are right: not yet measured

Every value above, in the review's public record (JSON)

Reviews by people

This review was written by a machine. No person has reviewed this paper on Pith yet. A scientist listed on Pith can review it for a fee, and their review is published here whatever it concludes.

Request a human review

How Pith checks papers · The full audit of this paper

The paper

Abstract

In this article, we study quasi-Einstein manifolds with constant scalar curvature. We provide a classification of compact and noncompact (possibly with boundary) T-flat quasi-Einstein manifolds with constant scalar curvature, where the T-tensor is directly related to the Cotton and Weyl tensors. Moreover, we construct new explicit examples of noncompact quasi-Einstein manifolds. In addition, we prove a complete classification of compact and noncompact (possibly with boundary) 3-dimensional m-quasi-Einstein manifolds with constant scalar curvature.

The paper's own sentences, arranged, kept beside the review and separate from it. Each label is drawn from a closed vocabulary; the number beside it is the probability the classifier gave that label. No sentence in this record was written by a model.

abstract compiled · 2026-09-23

The authors' main claim, as the classifier picked it out 0.55

“We provide a classification of compact and noncompact (possibly with boundary) $T$-flat quasi-Einstein manifolds with constant scalar curvature, where the $T$-tensor is directly related to the Cotton and Weyl tensors.”

How the main claim is stated: asserted 1.00

What the abstract itself states, as probabilities: claims first 0.04 · states limitation 0.09 · human participants 0.01 · controlled comparison 0.01 · randomized assignment 0.01 · states quantitative result 0.13 · compares with prior results 0.06 · mentions code or data availability 0.02

The abstract, sentence by sentence

This table labels the abstract only (arXiv listing abstract v1). The number is the probability the classifier gave the label.

SentenceRoleThe authors' own workStates the main conclusionStrength
In this article, we study quasi-Einstein manifolds with constant scalar curvature. contribution 0.61 0.80 0.05 asserted 0.83
We provide a classification of compact and noncompact (possibly with boundary) $T$-flat quasi-Einstein manifolds with constant scalar curvature, where the $T$-tensor is directly related to the Cotton and Weyl tensors. result 0.55 0.95 0.48 asserted 1.00
Moreover, we construct new explicit examples of noncompact quasi-Einstein manifolds. contribution 0.76 0.97 0.10 asserted 1.00
In addition, we prove a complete classification of compact and noncompact (possibly with boundary) $3$-dimensional $m$-quasi-Einstein manifolds with constant scalar curvature. result 0.66 0.96 0.36 asserted 1.00

What kind of paper the classifier reports this is: theoretical result 1.00 · evidence from proof or derivation 1.00

What was examined, and what was not

Sources read

  • arXiv listing abstract v1

Not examined

  • full text
  • figures and tables
  • references and citing sentences
  • relations to other papers

Levels run

  • P abstract

Not run

  • S sections
  • T body sentences
  • C citations
  • R cross-paper relations

How the labels were made

Compiled by classifier-1.13.0 via TypeSafe API, question bank abstract-p1-20260923, 2026-09-23: 1 request, 3,618 input tokens.

Every quoted sentence on this record is the authors'. Every label is from Pith's closed vocabulary, with the probability shown beside it. This record as JSON

References (49)
  1. [28] Di´ ogenes, R. and Gadelha, T.: Compact quasi-Einstein manifolds with boundary . Math. Nachr. 295, (2022) 1690–1708 on Pith
  2. [27] Costa, J., Ribeiro Jr, E. and Zhou, D.: Rigidity of compact quasi-Einstein manifolds with boundary. arXiv:2401.16929 [math.DG], (2024) on PithPith's reviewarXiv
  3. [37] He, C., Petersen, P. and Wylie, W.: Warped product Einstein metrics over spaces with constant scalar curvature . Asian J. Math. v. 18, n. 1, (2014) 159–190 on Pith
  4. [1] Bahuad, E., Gunasekaran, S., Kunduri, K. and W oolgar, E. : Static near-horizon geometries and rigidity of quasi-Einstein manifolds . Letters Math. Physics, v. 112, n. 116, (2022) on Pith
  5. [2] Bahuad, E., Gunasekaran, S., Kunduri, K. and W oolgar, E. : Rigidity of quasi-Einstein metrics: The incompressible case . Letters Math. Physics, v. 114, n. 8, 2024 on Pith
  6. [3] Bakry, D. and ´Emery, M.: Diffusions Hypercontractives. S´ eminaire de pro babilit´ es, XIX, 1983/84. Lecture Notes in Math. v. 1123, (1985) 177–206 on Pith
  7. [4] Barros, A., Batista, R. and Ribeiro Jr, E.: Bounds on volume growth of geodesic balls for Einstein warped products . Proc. American Math. Soc. 143 (2015) 4415–4422 on Pith
  8. [5] Barros, A., Di´ ogenes, R. and Ribeiro Jr., E.: Bach-Flat critical metrics of the volume functional on 4-dimensional manifolds with boundary . J. Geom. Anal. 25 (2015) 2698–2715 on Pith
  9. [6] Barros, A., Ribeiro Jr, E. and Silva, J.: Uniqueness of quasi-Einstein metrics on 3- dimensional homogeneous manifolds . Diff. Geom. and its App. 35 (2014) 60–73. QUASI-EINSTEIN MANIFOLDS 19 on Pith
  10. [7] Batista, R., Ranieri, M. and Ribeiro Jr., E.: Remarks on complete noncompact Einstein warped products. Comm. Analysis and Geom., v. 28, n. 3, (2020) 547–563 on Pith
  11. [8] B´ erard Bergery, L.: Sur de nouvelles vari´ etes riemanniennes d’Einstein. Public. Institut E. Cartan. 4 (Nancy) 1–60 (1982) on Pith
  12. [9] Besse, A. L.: Einstein manifolds . Berlin: Springer-Verlag, (1987) on Pith
  13. [10] B¨ ohm, C.: Inhomogeneous Einstein metrics on low-dimensional sphere s and other low- dimensional spaces. Invent. Math. 134 (1998) 145–176 on Pith
  14. [11] B¨ ohm, C.: Non-compact cohomogeneity one Einstein manifolds . Bulletin de la Soci´ et´ e Math´ ematique de France, v. 127 (1999) 135–177 on Pith
  15. [12] Boucher, W. and Gibbons, G.: Cosmic baldness, in The very early universe . Cambridge: Cambridge University Press, (1983) 273–278 on Pith
  16. [13] Cao, H.-D.: Recent progress on Ricci solitons . Adv. Lect. Math. 11, no. 2, (2010) 1–38 on Pith
  17. [14] Cao, H.-D. and Chen, Q.: On Bach-flat gradient shrinking Ricci solitons . Duke Math. J. v. 162, (2013) 1149–1169 on Pith
  18. [15] Cao, H.-D., Catino, G., Chen, Q., Mantegazza, C. and Maz zieri, L.: Bach-flat gradient steady Ricci solitons . Calc. Var. & PDE. 49, (2014) 125–138 on Pith
  19. [16] Cao, H.-D. and J. Yu.: On complete gradient steady Ricci solitons with vanishing D-tensor. Proc. Amer. Math. Soc. 149 (2021), no. 4, 1733–1742 on Pith
  20. [17] Case, J., Shu, Y.-S. and W ei, G.: Rigidity of quasi-Einstein metrics . Diff. Geom. and its App., v. 29 (2011) 93–100 on Pith
show 29 more
  1. [18] Case, J.: On the nonexistence of quasi-Einstein metrics . Pacific J. Math. 248 (2010) 227– 284 on Pith
  2. [19] Case, J.: Smooth metric measure spaces and quasi-Einstein metrics . Intern. J. Math. 23, no. 10 (2012) 1250110 on Pith
  3. [20] Catino, G.: A note on four-dimensional (anti-)self-dual quasi-Einste in manifolds . Diff. Geom. and its App., v. 30, n. 6, (2012) 660–664 on Pith
  4. [21] Catino, G.: Rigidity of positively curved shrinking Ricci solitons in d imension four . Geo- metric Flows. v. 4, n. 1, (2019) p. 1–8 on Pith
  5. [22] Catino, G., Mantegazza, C., Mazzieri, L. and Rimoldi, M .: Locally conformally flat quasi- Einstein manifolds . J. Reine Angew. Math. (Crelle’s Journal). 675 (2013) 181–1 89 on Pith
  6. [23] Chen, Q. and He, C.: On Bach flat warped product Einstein manifold . Pacific J. Math. v. 265, n. 2, (2013) 313–326 on Pith
  7. [24] Cheng, X. and Zhou, D.: Rigidity of four-dimensional gradient shrinking Ricci sol itons. J. Reine Angew. Math. (Crelle’s Journal). 802 (2023) 255–274 on Pith
  8. [25] Cheng, X., Ribeiro Jr, E. and Zhou, D.: Volume growth estimates for Ricci solitons and quasi-Einstein manifolds . J. Geom. Anal. 32 (2022) 62 on Pith
  9. [26] Costa, J., Di´ ogenes, R., Pinheiro, N. and Ribeiro Jr., E.: Geometry of static perfect fluid space-time. Classical and Quantum Gravity. v. 40, n. 20, (2023) on Pith
  10. [29] Di´ ogenes, R., Gadelha, T. and Ribeiro Jr., E.: Geometry of Compact quasi-Einstein Mani- folds. Manuscripta Math. 169, (2022) 167–183 on Pith
  11. [30] Di´ ogenes, R., Gadelha, T. and Ribeiro Jr., E.: Remarks on quasi-Einstein manifolds with boundary. Proc. Amer. Math. Soc. v. 150, (2022) 351–363 on Pith
  12. [31] Fern´ andez-L´ opez, M. and Garc ´ ıa-R ´ ıo, E.:On gradient Ricci solitons with constant scalar curvature. Proc. Amer. Math. Soc. v. 144, n. 1, (2016) 369–378 on Pith
  13. [32] Fern´ andez-L´ opez, M., Garc ´ ıa-R ´ ıo, E. and Valle-Regueiro, X.: Isotropic quasi-Einstein man- ifolds. Classical and Quantum Gravity. 36 (2019) 245005 on Pith
  14. [33] Ge, J. and Tang, Z.: Geometry of isoparametric hypersurfaces in Riemannian man ifolds. Asian J. Math. v. 18, n. 1, (2014) 117–126 on Pith
  15. [34] Ge, J. and Tang, Z.: Isoparametric functions and exotic spheres . J. Reine Angew. Math. (Crelle’s Journal). 2013, n. 683, (2013) 161–180 on Pith
  16. [35] He, C., Petersen, P. and Wylie, W.: On the classification of warped product Einstein metric . Comm. Analysis and Geom. v. 20, n. 2, (2012) 271–311 on Pith
  17. [36] Hamilton, R.: The formation of singularities in the Ricci flow . Surveys in Differential Geometry. Vol. II (Cambridge, MA, 1993). Int. Press, Cambri dge, MA, 1995, pp. 7–136. 20 J. COSTA, E. RIBEIRO JR AND M. SANTOS on Pith
  18. [38] Khuri, M., W oolgar, E. and Wylie, W.: New restrictions on the topology of extreme black holes. Letters Math. Physics, v. 109, (2019) 661–673 on Pith
  19. [39] Kim, D.-S. and Kim, Y. H.: Compact Einstein warped product spaces with nonpositive sc alar curvature. Proc. Amer. Math. Soc. v. 131, n. 8, (2003) 2573–2576 on Pith
  20. [40] O’Neill, B.: Semi-Riemannian Geometry with Applications to Relativity . Cambridge: Cam- bridge Academic Press, (1983) on Pith
  21. [41] Qian, Z.: Estimates for weighted volumes and applications . Quarterly J. Math. 48, n. 2, (1997) 235–242 on Pith
  22. [42] Qing, J. and Yuan, W.: A note on vacuum static spaces and related problems . J. Geom. Physics, v. 74 (2013) 18–27 on Pith
  23. [43] Reilly, R.: Geometric applications of the solvability of Neumann probl ems on a Riemannian manifold. Arch. Rational Mech. Anal. (1) 75 (1980) 23–29 on Pith
  24. [44] Ribeiro Jr, E. and Tenenblat, K.: Noncompact quasi-Einstein manifolds conformal to a Euclidean space. Math. Nachr. 294 (2021) 132–144 on Pith
  25. [45] Rimoldi, M.: A remark on Einstein warped products . Pacific J. Math. 252 (2011) 207–218 on Pith
  26. [46] W ang, Q.: Isoparametric functions on Riemannian manifolds. I . Math. Annalen. 277, n. 4, (1987) 639–646 on Pith
  27. [47] W ang, L. F.: On noncompact τ-quasi-Einstein metrics . Pacific J. Math. 254 (2011) 449–46 on Pith
  28. [48] W ang, L. F.: Potential functions estimates for quasi-Einstein metrics . J. Functional Anal- ysis. 267 (2014) 1986–2004 on Pith
  29. [49] Wylie, W.: Rigidity of compact static near-horizon geometries with ne gative cosmological constant. Letters Math. Physics, v. 113, n. 29, (2023). (J. Costa) Instituto Federal de Educac ¸˜ao, Ci ˆencia e Tecnologia do Sert ˜ao Pernam- bucano - IFSert ˜aoPE, Campus Ouricuri, 562... on Pith
Cited by 1 Pith paper
How the literature uses it

1 arXiv paper cite this in 1 sentence

Each citing sentence is taken from the citing paper's LaTeX source and typed by Pith's classifier. A label appears at probability 0.8 or more (0.95 for support), a contest at 0.7 or more; the quoted words are the citing authors'. How each label was checked · JSON

Papers citing it

Cites it as background 1 paper

What it cites · 8 sentences without a confident label

Builds on 1 paper

Challenges and discussion

Disagree with the review, or know something it missed? Leave a comment, or challenge this review formally: a challenge becomes a permanent entry in this paper's record, and its decision is published here.

No comments yet.

Sign in to comment