Geometric Topology · arXiv:2611.16340 v1 · submitted 12 Nov 2026 · 9 references
The Bolza Surface Does Not Locally Minimize the Diameter Function
The paper says
“We study the diameter function on the Teichmüller space of closed hyperbolic Riemann surfaces. Although the Bolza surface maximizes the systole among hyperbolic surfaces of genus 2, its extremal behavior with respect to the diameter function is less clear.”
more of the abstract
Using first variations of distances at diameter pairs and linear programming duality, we establish a sufficient criterion for a surface not to be a local minimizer of the diameter function. More precisely, we show that if each diameter pair can be assigned a simple closed geodesic formed by two minimizing geodesic segments joining its endpoints, with distinct assigned geodesics pairwise disjoint, then a deformation varying only the length parameters in Fenchel-Nielsen coordinates strictly decreases the diameter. The assigned geodesics extend to a pants decomposition, and the decrease is detected by a strictly negative upper bound for the first-order variation of the diameter. We then apply this criterion to the Bolza surface and prove that it is not a local minimizer of the diameter function on the Teichmüller space of genus 2.
from the abstract
Pith says
Machine review · deepseek-v4-flash · 13 Nov 2026 · what was read was not recorded · not checked by a person
It can be wrong. Challenge this review or reply to it.
The passes disagreed. Reader: holds up. Skeptic: holds up only with conditions. Referee: major revision.
A clean, self-contained criterion for non-minimality of the diameter function, applied to the Bolza surface; the load-bearing geometric claim in Lemma 4.2 is not independently verifiable from the cited source. This line is wrong
1 major objection · 3 minor
How often objections from reviews like this one are right: not yet measured
Not checked: figures, code, what the 9 references say.
The paper says, at §4, Lemma 4.2
The review did not quote this passage.
Pith says: Objection 1 of 1 · major
The proof of Lemma 4.2 depends on [7, Figure 12 (ii)] and [7, Proof of Theorem 1.3] for the existence of three pairwise disjoint simple closed geodesics of length 2DB, each formed by two minimizing segments joining a diameter pair.
more of objection 1
This assertion is load-bearing: without it, Corollary 1.2 does not follow. The cited source [7] is a journal article dated 2026; at the time of this review its accessibility and content cannot be taken for granted. The paper does not reproduce the relevant figure or provide an independent construction. To make the manuscript self-contained, the authors should either give a direct geometric proof of Lemma 4.2 using the explicit description of the Bolza surface (for instance, the fundamental octagon and its symmetries from Proposition 4.1) or include the essential details of the cited argument (e.g., reproduce the figure and explain why the three geodesics have length 2DB and are pairwise disjoint). As it stands, the main result rests on an unverified external claim.
This review says the paper's mathematics is wrong. Pith did not check that against the paper's source.
3 minor objections
The paper says, at Abstract and Introduction
Pith says: minor objection 1 of 3
The abstract uses the LaTeX escape "Teichm\"uller"; the display in the final PDF should be correct, but please ensure the compiled text uses "Teichmüller".
The paper says, at References
Pith says: minor objection 2 of 3
Reference [7] is listed as a 2026 journal article. If an arXiv version exists, it would be helpful to cite it as well (e.g., with a DOI or arXiv identifier) to ease verification for readers and reviewers.
show 1 more
The paper says, at Figure 1
Pith says: minor objection 3 of 3
Figure 1 is schematic. A more precise indication of how the three geodesics are positioned relative to the octagon's vertices and side midpoints would help the reader verify the pairwise disjointness claim.
What would settle it
Verify that [7] (Saha–Sanki, New York J. Math. 32, 2026) is published and that Figure 12 (ii) indeed depicts three pairwise disjoint simple closed geodesics on the Bolza surface, each passing through one of the three diameter pairs {O,V}, {M0,M2}, {M1,M3}, and each of length 2DB. If the figure or the accompanying text does not explicitly show this configuration, or if the journal volume is not yet available, then Lemma 4.2 is unsupported and the central claim is unsubstantiated.
from the skeptic's reading
How the review went
4 readings by deepseek-v4-flash · 13 Nov 2026
- Reader holds up
- Skeptic agrees: says it holds up only with conditions Lemma 4.2 relies on an unpublished description of second systoles; the existence of three pairwise disjoint simple closed geodesics each formed by two minimizing segments of length DB is not independently verifiable from the cited source.
- Editor wrote the verdict above
- Referee major revision: 1 major objection, 3 minor
Not run on this paper: the simulated authors' defence.
Pith did not check this review's objections against the paper.
The review in full
The review in brief, machine-written
The paper does two things well. First, it proves a general sufficient condition (Theorem 1.1) for a hyperbolic surface not to be a local minimizer of the diameter function on Teichmüller space. The argument uses first variations, linear programming duality, and Fenchel–Nielsen deformations, and it is presented cleanly. Second, it applies this criterion to the Bolza surface, concluding that the Bolza surface is not a local minimizer of the diameter function on T2. The general criterion is new and the application is natural.
The soft spot is Lemma 4.2. The lemma asserts the existence of three pairwise disjoint simple closed geodesics on the Bolza surface, each formed by two minimizing geodesic segments joining a diameter pair, and each of length 2DB. The proof cites [7, Figure 12 (ii)] and [7, Proof of Theorem 1.3] for the description of second systoles. The paper does not reproduce the figure or the geometric argument, and [7] is a 2026 publication that may not yet be accessible. The existence of these geodesics is load-bearing for the application of Theorem 1.1. If the cited source is unavailable or the figure does not depict the claimed configuration, the application fails. The paper's own Proposition 4.1 identifies the three diameter pairs but does not itself construct the geodesics; Lemma 4.2 is the sole bridge. This is a real concern, but it is not a flaw in the logic of the paper—it is a reliance on an external source that the reader cannot currently verify. The authors could strengthen the paper by providing an independent construction or a more detailed description.
Overall, the paper is well-structured and the main ideas are clear. The general criterion is a solid contribution. The application to the Bolza surface is plausible but depends on a geometric claim that is not fully verified in the paper. I would send this to peer review, but I would ask the referee to pay close attention to Lemma 4.2 and to verify the existence of the claimed geodesics. The paper is worth engaging with, but the authors should be asked to either provide a self-contained proof of Lemma 4.2 or cite a source that is publicly available and clearly contains the needed configuration.
The strongest objection
The central application of Theorem 1.1 to the Bolza surface depends on Lemma 4.2, which asserts the existence of three pairwise disjoint simple closed geodesics, each the union of two minimizing geodesic segments joining a diameter pair. The proof of Lemma 4.2 cites [7, Figure 12 (ii)] and [7, Proof of Theorem 1.3] for the description of second systoles and the claim that each such geodesic has length 2DB. However, [7] is listed as a 2026 publication in the New York Journal of Mathematics (volume 32, pages 1134–1146). At the time of this review, that volume may not yet be published or accessible; the arXiv version of [7] (if any) is not cited. The paper does not reproduce the figure or the relevant geometric argument, nor does it provide an independent construction of these geodesics. The existence of three disjoint simple closed geodesics of length exactly 2DB that are each composed of two minimizing segments between a specific diameter pair is a strong geometric claim. If the cited source is unavailable or the figure does not depict the claimed configuration, the application of Theorem 1.1 fails. The paper's own Proposition 4.1 identifies the three diameter pairs, but does not itself construct the geodesics; Lemma 4.2 is the sole bridge. This is a load-bearing concern because the entire corollary collapses without it.
The reader's weakest_assumption correctly identifies Lemma 4.2 as the critical step. My analysis agrees that the existence of the three disjoint geodesics is the linchpin. However, I go further in specifying why this is a concern: the sole support for Lemma 4.2 is a citation to a figure in a very recent (2026) paper that may not be widely accessible or may not contain the claimed configuration. The paper does not provide an independent geometric construction or a reference to a well-known fact; it relies entirely on [7]. This is not an attack on the authors' integrity, but a practical verification concern: if the cited source is unavailable or does not match the description, the argument is incomplete. The reader's verdict of ACCEPT with HIGH confidence seems premature given this dependency. I recommend CONDITIONAL: acceptance should be contingent on verification that [7] indeed provides the claimed configuration. The paper is otherwise well-structured and the general criterion (Theorem 1.1) appears sound. The concrete test is straightforward: check the cited source. If the source is verified, the paper should be accepted; if not, the claim is unsubstantiated.
The referee's report
If the argument is correct, the result provides a concrete instance where the diameter function differs from the systole function in local behavior over Teichmüller space. The general criterion in Theorem 1.1 is a clean, potentially reusable tool for studying local minima of diameter-type invariants. The application to the Bolza surface is a natural test case, and the paper gives a self-contained derivation of the general criterion with careful attention to first variations and duality. The main gap is the support for Lemma 4.2, which relies on an external source for a nontrivial geometric configuration.
Pith's reading of the paper (a machine's summary, not the authors')
The paper proves that the Bolza surface, well known for maximising the systole among genus-2 hyperbolic surfaces, is not a local minimiser of the diameter function. The authors establish a general sufficient criterion for a surface not to be a local minimiser of the diameter function on Teichmüller space. The criterion involves assigning to each diameter pair a simple closed geodesic formed by two minimising geodesic segments joining the endpoints, with distinct assigned geodesics being pairwise disjoint. Applying this criterion to the Bolza surface, they show that a deformation decreasing the lengths of three such geodesics strictly reduces the diameter. This result shows that the systole and diameter functions behave differently as topological Morse functions.
What carries the argument. The central object is the local directional quantity Φ_P(V) for a diameter pair P, defined as the optimal value of a linear program involving the first variations of the lengths of minimising geodesic segments joining the endpoints. Proposition 2.2 gives a dual expression for Φ_P(V) as a convex combination of the length variations. Proposition 3.1 shows that if a diameter pair can be assigned a simple closed geodesic formed by two minimising segments, then Φ_P(V) ≤ (1/2) dℓ_γ(V). This inequality is the key to detecting a decrease in diameter when the lengths of the assigned geodesics are decreased. The Bolza surface's geometry is analysed via the regular hyperbolic octagon construction, identifying the three diameter pairs and the three disjoint simple closed geodesics that satisfy the criterion.
Core claim. The paper establishes a sufficient criterion for a closed hyperbolic Riemann surface not to be a local minimiser of the diameter function on Teichmüller space. The criterion is that if every diameter pair can be assigned a simple closed geodesic formed by two minimising geodesic segments joining its endpoints, with distinct assigned geodesics pairwise disjoint, then there exists a deformation (varying only the length parameters in Fenchel-Nielsen coordinates) that strictly decreases the diameter. The Bolza surface satisfies this criterion: its diameter locus consists of three pairs (the centre-vertex pair and two opposite-side-midpoint pairs), and each pair can be assigned a simple closed geodesic of length twice the diameter, with the three geodesics pairwise disjoint. Therefore the Bolza surface is not a local minimiser of the diameter function on the Teichmüller space of genus 2.
The premise it rests on. The existence of three pairwise disjoint simple closed geodesics on the Bolza surface, each formed by two minimising geodesic segments joining a diameter pair, as asserted in Lemma 4.2. This lemma relies on the description of second systoles in [7, Figure 12 (ii)] and the fact that each such geodesic has length 2D_B. If this geometric configuration does not exist, the application of Theorem 1.1 fails.
If the paper is right (Pith's inferences, not the authors')
If the Bolza surface does not locally minimise the diameter function, then the global minimiser of the diameter on T2 must be sought among other surfaces, possibly those with lower symmetry.
The sufficient criterion established in Theorem 1.1 can be applied to other surfaces of higher genus to test whether they are local minimisers of the diameter function.
The result shows that the systole function and the diameter function have different local behaviour on Teichmüller space, even though they are both topological Morse functions.
The deformation used in the proof (decreasing lengths of the three assigned geodesics while keeping other Fenchel-Nielsen coordinates fixed) provides an explicit direction in Teichmüller space along which the diameter strictly decreases.
The diameter locus of the Bolza surface is exactly three pairs, and each pair is assigned a distinct simple closed geodesic; this geometric configuration is the minimal case for the criterion to apply.
The criterion may be sharp in the sense that if the assigned geodesics are not pairwise disjoint, the deformation might not decrease the diameter, suggesting a necessary condition for local non-minimality.
The result raises the question of whether any surface with a sufficiently symmetric geometry can be a local minimiser of the diameter function, or whether the diameter function always has a descent direction away from highly symmetric surfaces.
The techniques used (first variations at diameter pairs, linear programming duality, Fenchel-Nielsen deformations) could be adapted to study the local behaviour of other geometric functionals on Teichmüller space, such as the length of the shortest closed geodesic or the volume entropy.
The explicit description of the diameter locus of the Bolza surface and the three disjoint simple closed geodesics may be useful for numerical experiments on the diameter function on T2.
Check this review
Pith stored no record of this review's passes and took no fingerprint of it. Reviews made by code from 13 Nov 2026 on carry both.
How often reviews like this one are right
Reviews like this one: written by deepseek-v4-flash, where what was read was not recorded.
How often objections from reviews like this one are right: not yet measured
Reviews by people
This review was written by a machine. No person has reviewed this paper on Pith yet. A scientist listed on Pith can review it for a fee, and their review is published here whatever it concludes.
The paper
Abstract
We study the diameter function on the Teichmüller space of closed hyperbolic Riemann surfaces. Although the Bolza surface maximizes the systole among hyperbolic surfaces of genus 2, its extremal behavior with respect to the diameter function is less clear. Using first variations of distances at diameter pairs and linear programming duality, we establish a sufficient criterion for a surface not to be a local minimizer of the diameter function. More precisely, we show that if each diameter pair can be assigned a simple closed geodesic formed by two minimizing geodesic segments joining its endpoints, with distinct assigned geodesics pairwise disjoint, then a deformation varying only the length parameters in Fenchel-Nielsen coordinates strictly decreases the diameter. The assigned geodesics extend to a pants decomposition, and the decrease is detected by a strictly negative upper bound for the first-order variation of the diameter. We then apply this criterion to the Bolza surface and prove that it is not a local minimizer of the diameter function on the Teichmüller space of genus 2.
The paper's own sentences, arranged, kept beside the review and separate from it. Each label is drawn from a closed vocabulary; the number beside it is the probability the classifier gave that label. No sentence in this record was written by a model.
abstract compiled · 2026-11-13
The authors' main claim, as the classifier picked it out 1.00
“We then apply this criterion to the Bolza surface and prove that it is not a local minimizer of the diameter function on the Teichm\"uller space of genus 2.”
How the main claim is stated: asserted 1.00
What the abstract itself states, as probabilities: claims first 0.05 · states limitation 0.17 · human participants 0.01 · controlled comparison 0.04 · randomized assignment 0.01 · states quantitative result 0.22 · compares with prior results 0.42 · mentions code or data availability 0.02
The abstract, sentence by sentence
This table labels the abstract only (arXiv listing abstract v1). The number is the probability the classifier gave the label.
| Sentence | Role | The authors' own work | States the main conclusion | Strength |
|---|---|---|---|---|
| We study the diameter function on the Teichm\"uller space of closed hyperbolic Riemann surfaces. | background 0.68 | 0.83 | 0.02 | asserted 0.74 |
| Although the Bolza surface maximizes the systole among hyperbolic surfaces of genus 2, its extremal behavior with respect to the diameter function is less clear. | gap 0.83 | 0.06 | 0.03 | asserted 0.92 |
| Using first variations of distances at diameter pairs and linear programming duality, we establish a sufficient criterion for a surface not to be a local minimizer of the diameter function. | method 0.56 | 0.96 | 0.11 | asserted 1.00 |
| More precisely, we show that if each diameter pair can be assigned a simple closed geodesic formed by two minimizing geodesic segments joining its endpoints, with distinct assigned geodesics pairwise disjoint, then a deformation varying only the length parameters in Fenchel-Nielsen coordinates strictly decreases the diameter. | result 0.46 | 0.91 | 0.10 | asserted 1.00 |
| The assigned geodesics extend to a pants decomposition, and the decrease is detected by a strictly negative upper bound for the first-order variation of the diameter. | method 0.62 | 0.91 | 0.05 | asserted 1.00 |
| We then apply this criterion to the Bolza surface and prove that it is not a local minimizer of the diameter function on the Teichm\"uller space of genus 2. | result 0.99 | 0.97 | 0.95 | asserted 1.00 |
What kind of paper the classifier reports this is: theoretical result 1.00 · evidence from proof or derivation 1.00
What was examined, and what was not
Sources read
- arXiv listing abstract v1
Not examined
- full text
- figures and tables
- references and citing sentences
- relations to other papers
Levels run
- P abstract
Not run
- S sections
- T body sentences
- C citations
- R cross-paper relations
How the labels were made
Compiled by classifier-1.13.0 via TypeSafe API, question bank abstract-p1-20260923, 2026-11-13: 1 request, 5,045 input tokens.
Every quoted sentence on this record is the authors'. Every label is from Pith's closed vocabulary, with the probability shown beside it. This record as JSON
Figures (1)
Figures are the authors', reproduced from the paper.
References (9)
- [7] Bhola Nath Saha and Bidyut Sanki,Complexity in the Bolza surface, New York J. Math.32(2026), 1134–1146, https: //nyjm.albany.edu/j/2026/32-45.html on Pith
- [1] P. Buser,Geometry and Spectra of Compact Riemann Surfaces, Progress in Mathematics, vol. 106, Birkhäuser, Boston, 1992 on Pith
- [2] Fwu-Ranq Chang,On the diameters of compact Riemann surfaces, Proc. Amer. Math. Soc.65(1977), no. 2, 274–276, https://doi.org/10.1090/S0002-9939-1977-0447556-8 on Pithdoi:10.1090/s0002-9939-1977-0447556-8
- [3] Paul Horja,On the number of geodesic segments connecting two points on manifolds of non-positive curvature, Trans. Amer. Math. Soc.349(1997), no. 12, 5021–5030,https://doi.org/10.1090/S0002-9947-97-01847-3 on Pithdoi:10.1090/s0002-9947-97-01847-3
- [4] Ingrid Irmer and Bhola Nath Saha,The diameter function is a topological Morse function, arXiv:2606.21291, 2026, https://doi.org/10.48550/arXiv.2606.21291 on PithPith's reviewarXivdoi:10.48550/arxiv.2606.21291
- [5] Mikhail G. Katz and Stéphane Sabourau,An optimal systolic inequality for CAT(0) metrics in genus two, Pacific J. Math. 227(2006), no. 1, 95–107,https://doi.org/10.2140/pjm.2006.227.95 on Pithdoi:10.2140/pjm.2006.227.95
- [6] J. Matoušek and B. Gärtner,Understanding and Using Linear Programming, Universitext, Springer, Berlin, Heidelberg, 2007,https://doi.org/10.1007/978-3-540-30717-4 on Pithdoi:10.1007/978-3-540-30717-4
- [8] Paul Schmutz Schaller,Systoles and topological Morse functions for Riemann surfaces, J. Differential Geom.52(1999), no. 3, 407–452,https://doi.org/10.4310/jdg/1214425347 on Pithdoi:10.4310/jdg/1214425347
- [9] Huck Stepanyants, Alan Beardon, Jeremy Paton, and Dmitri Krioukov,Diameter of compact Riemann surfaces, Comput. Methods Funct. Theory25(2025), no. 3, 629–644,https://doi.org/10.1007/s40315-024-00546-3 on Pithdoi:10.1007/s40315-024-00546-3
Challenges and discussion
Disagree with the review, or know something it missed? Leave a comment, or challenge this review formally: a challenge becomes a permanent entry in this paper's record, and its decision is published here.
Come back by email
A short list of the week's newly reviewed papers. Nothing is sent until you confirm from your inbox, and every email has a link that stops it. No account.
No comments yet.
Sign in to comment