Pith.

Fluid Dynamics · arXiv:2611.16520 v1 · submitted 12 Nov 2026 · 32 references

Experimental and numerical simulations of near resonant 2D soliton interaction in shallow water

Thibault Leduque, Fred Couderc, Maxime Kaczmarek, Eric Barthélemy, Nicolas Mordant, Hervé Michallet

The paper says

“Experiments were carried out in a large wave basin (27 × 30\,m2) to study the interactions of non-linear waves in shallow water (0.35\,m deep). A stereoscopic technique was used to measure the waves accurately over a vast area (180\,m2).”

more of the abstract

The numerical code Tolosa-lct, designed for simulating wave propagation in shallow water, reproduces the observations and extends the analysis for larger domains. The diffraction of oblique solitons is discussed. Mach interaction of two solitons occurs for some given incidence and amplitudes, producing a third soliton. A focus is made on the near resonant interaction of a soliton with a vertical wall. An example of a regular Mach interaction is shown, where a steady solution is achieved experimentally, with a maximum amplitude amplification of 3.2 at the wall.

from the abstract

Pith says

Machine review · deepseek-v4-flash · 13 Nov 2026 · what was read was not recorded · not checked by a person

It can be wrong. Challenge this review or reply to it.

The passes disagreed. Reader: holds up. Skeptic: holds up only with conditions. Referee: major revision.

Solid experimental demonstration of quasi-steady 3-soliton wall interaction, but the procedure for extracting incident wave parameters is opaque, leaving a mild circularity concern. This line is wrong

1 major objection

How often objections from reviews like this one are right: not yet measured

Are you an author? What you can do.

Not checked: figures, code, what the 32 references say.

The paper says, at Section 3.2.2, Fig. 10

The review did not quote this passage.

Pith says: Objection 1 of 1 · major

The determination of the incident soliton parameters for the central 3S experiment (ϵ_i=0.171, θ_i=−30.4°) is described only as 'deduced from the stereo scopic reconstruction' and 'best fit angles' (Fig. 10). No measurement procedure is provided: how were the angle and amplitude extracted from the stereo scopic data?

more of objection 1

What algorithm, what averaging, what uncertainty? The skeptic's concern that these values could be chosen to obtain agreement with Miles' theory (which then yields exactly the observed amplification 3.22) cannot be dismissed without a transparent description. Given that κ=1.03 is a derived quantity, the entire claim of a regular Mach interaction with κ≈1 hinges on the reliability of these inputs. The authors must (i) describe the measurement/estimation procedure in detail, (ii) report uncertainties on θ_i and ϵ_i, and (iii) discuss whether the values are independent of the theory they are compared with.

What would settle it

Provide the direct measurement of ε_i and θ_i for the 3S experiment from a wave gauge at (x=6.25 m, y=8.50 m) or from stereoscopic reconstruction at a location unaffected by the wall interaction. Show time series and propagation direction to confirm the values used. If the gauge data are not available for this run, state that explicitly and explain how the parameters were obtained without using the stem fit.

from the skeptic's reading

How the review went

4 readings by deepseek-v4-flash · 13 Nov 2026

  1. Reader holds up confidence moderate
  2. Skeptic partly agrees: says it holds up only with conditions 20 s · 14,579 tokens read, 2,356 written The incident wave parameters for the 3S experiment are not independently measured; they may be inferred from fitting Miles' solution to the stem, risking circularity.
  3. Editor wrote the verdict above 14 s · 15,328 tokens read, 1,559 written
  4. Referee major revision: 1 major objection 17 s · 14,900 tokens read, 2,055 written

Not run on this paper: the simulated authors' defence.

Pith did not check this review's objections against the paper.

The review in full

The review in brief, machine-written

The paper reports a large-scale experiment and complementary numerical simulation of Mach reflection in shallow water, culminating in a quasi-steady three-soliton (3S) configuration that achieves a stem amplification of 3.22. That is genuinely new—previous experiments did not reach this type of regular interaction with a stable stem. The stereoscopic coverage over 180 m² is impressive, and the agreement between experiment and the Tolosa-lct code is strong across multiple interaction scenarios. The authors also provide a useful survey of the parameter space for single oblique solitons, confirming the broad trends of second-order KP theory.

What should give you pause is the derivation of the incident wave parameters (εi=0.171, θi=−30.4°) that underpin the 3S claim. The paper says these are 'deduced from the stereoscopic reconstruction' but never describes the measurement or fitting procedure. Figure 10 shows best-fit angles as dashed lines, but no algorithm or uncertainty interval is given. This matters because the observed amplification exactly matches Miles' formula once these parameters are plugged in: κ=1.03 and αw=3.22. It is plausible that the parameters were chosen to make the fit work, and the circularity burden flagged by the stress-test is not resolved in the text. The authors do acknowledge that diffraction is the main uncertainty and that κ∼1 is hard to explore, but without a transparent extraction of θi and εi the central numeric claim is weaker than it could be.

Other soft spots: the 3S stem is called 'quasi-steady' but stability conditions are not quantified (the paper says these 'remain to be fully specified'). The comparison to inviscid KP theory near resonance is inconclusive, and the fourfold amplification predicted at κ=1 is not approached.

Overall, the experiment is a serious piece of work that deserves a proper referee. The paper should be accepted after the authors add a clear section describing how the incident wave parameters were obtained—ideally with an independent check (e.g. from a wave gauge record before diffraction sets in). The results on single-soliton scans and the code validation are solid and not affected by this issue; the 3S demonstration is suggestive but should be caveated until the parameter extraction is clarified.

The strongest objection

The paper's central claim of a regular Mach interaction with κ=1.03 and amplification 3.22 depends crucially on the values ε_i=0.171 and θ_i=-30.4°. These values differ from the prescribed ones (ε_0=0.2, θ_0=-34°). The paper states they are 'deduced from stereoscopic reconstruction' and 'reflect the proper balance' but does not describe how the angle θ_i was determined. Figure 10 shows best-fit angles as dashed lines but no measurement procedure is given. Without a transparent, independent measurement of the incident wave parameters (e.g., from wave gauges or stereoscopy far from the wall), the subsequent agreement with Miles' formula (which yields exactly the observed amplification 3.22) may be circular: the parameters could be chosen to make the fit work. The uncertainty in κ due to diffraction is acknowledged, but the derivation of the most critical inputs is opaque.

The reader's weakest assumption was that the measurement of incident soliton parameters is affected by diffraction, leading to uncertainty in κ. I agree that this is a central issue, but my concern is more specific: the paper does not clearly demonstrate that ε_i and θ_i for the 3S experiment are independently measured. If they are derived from fitting the Miles solution to the stem, then the claim of agreement becomes self-confirming. This undermines the strongest claim of a regular Mach interaction with κ=1.03 and amplification 3.22. The paper otherwise provides a careful experimental study, but this opacity in the key measurement requires clarification. Hence the verdict should be CONDITIONAL on transparency of that measurement.

The referee's report

The paper provides rare, high-quality experimental data for strongly non-linear two-dimentional wave interactions, which are difficult to obtain due to diffraction and boundary effects. The stereo scopic technique over a large area (180 m²) and the careful validation of the numerical model are valuable contributions. The demonstration of a near-resonant three-soliton solution with a stable stem supports the second-order KP theory and opens a path toward controlled study of resonant stem dynamics. The paper also pragmatically identifies the limitations due to diffraction and the need for larger domains.

Pith's reading of the paper (a machine's summary, not the authors')

This paper aims to establish that a steady Mach interaction between an oblique soliton and a vertical wall can be achieved in shallow water, producing a stem whose amplitude reaches 3.2 times the incident soliton amplitude. The authors combine large-scale experiments with stereoscopic wave measurements and numerical simulations using the Tolosa-lct code. They demonstrate that the interaction parameter κ (a function of incidence angle and amplitude) determines the transition between regular and irregular (Mach) reflection. A quasi-steady three-soliton solution (3S) is shown, where incident, reflected, and stem waves all propagate as individual solitons. These results give experimental support to the second-order KP theory of Kodama and Yeh (2016).

What carries the argument. The central object is the dimensionless parameter κ (Kodama and Yeh parameter, Eq. 12) that quantifies the combined effect of incidence angle and amplitude for a soliton obliquely incident on a wall. This parameter determines whether the interaction is regular (κ>1, stem width constant) or irregular (κ<1, stem width grows), with resonance at κ=1. The amplification factor α_w for the stem amplitude follows a piecewise function (Eq. 11) with a correction for the irregular regime by Kodama and Yeh (2016) that introduces a virtual amplification ˆα (Eq. 13). The experiments and simulations test this parametric scaling.

Core claim. The central claim is that a near-resonant, quasi-steady Mach interaction can be realized experimentally and numerically in a finite basin, with a maximum stem amplification factor of 3.22 at κ=1.03. This is close to the theoretical resonance condition (κ=1) where a fourfold amplification (α=4) is predicted by the second-order KP theory. The three-soliton solution (3S), in which three wave trains (incident, reflected, and stem) coexist as individual solitons, is shown to be remarkably stable over a distance of several stem widths. The numerical code reproduces the experiments well and extends the study to larger domains and inviscid conditions, confirming the sensitivity of the amplification near resonance.

The premise it rests on. The main uncertainty in computing the kappa parameter arises from diffraction and the segmented wavemaker, which affect the measured incident soliton amplitude and angle; this limits the accuracy of the comparison with theory, especially near resonance.

If the paper is right (Pith's inferences, not the authors')

If the claim is correct, then the second-order KP theory can be validated for amplitude amplifications up to around 3.2 in shallow-water experiments, bridging the gap between weakly nonlinear theory and real wave basins.

The stable three-soliton solution provides a controlled way to generate a 2D localized wave (stem) that may serve as a building block for understanding two-dimensional solitons and soliton gases.

The numerically extrapolated results (Fig. 12) suggest that inviscid KP theory holds well away from resonance, but near κ=1 even small parameter uncertainties cause significant deviations, implying that reaching the exact fourfold amplification requires extreme control of incident conditions.

The Tolosa-lct code, with its hyperbolic dispersive formulation, is shown capable of reproducing both the generation and interaction dynamics, offering a practical tool for large-scale shallow-water wave simulations.

The observed deviation from the fourfold amplification (3.22 vs 4) may be partly due to the finite basin width and diffraction, not just bottom friction — a testable extension would be to repeat the 3S experiment in a wider tank or with a longer wall to allow the stem to establish fully.

The dependence of the amplification on the exact geometry of the wavemaker and the generated soliton profile (Rayleigh vs KdV) suggests that the choice of soliton shaping matters for resonant interaction studies; future experiments could test this by comparing with true KdV solitons.

The authors note that the stability conditions of the 3S solution remain to be fully specified; a dedicated stability analysis (e.g., via linear stability of the stem) could be performed numerically to determine the parameter regimes where the three-soliton solution persists.

Check this review

Pith stored no record of this review's passes and took no fingerprint of it. Reviews made by code from 13 Nov 2026 on carry both.

How often reviews like this one are right

Reviews like this one: written by deepseek-v4-flash, where what was read was not recorded.

How often objections from reviews like this one are right: not yet measured

Every value above, in the review's public record (JSON)

Reviews by people

This review was written by a machine. No person has reviewed this paper on Pith yet. A scientist listed on Pith can review it for a fee, and their review is published here whatever it concludes.

Request a human review

How Pith checks papers · The full audit of this paper

The paper

Abstract

Experiments were carried out in a large wave basin (27 × 30\,m2) to study the interactions of non-linear waves in shallow water (0.35\,m deep). A stereoscopic technique was used to measure the waves accurately over a vast area (180\,m2). The numerical code Tolosa-lct, designed for simulating wave propagation in shallow water, reproduces the observations and extends the analysis for larger domains. The diffraction of oblique solitons is discussed. Mach interaction of two solitons occurs for some given incidence and amplitudes, producing a third soliton. A focus is made on the near resonant interaction of a soliton with a vertical wall. An example of a regular Mach interaction is shown, where a steady solution is achieved experimentally, with a maximum amplitude amplification of 3.2 at the wall.

The paper's own sentences, arranged, kept beside the review and separate from it. Each label is drawn from a closed vocabulary; the number beside it is the probability the classifier gave that label. No sentence in this record was written by a model.

abstract compiled · 2026-11-13

The authors' main claim, as the classifier picked it out 0.83

“An example of a regular Mach interaction is shown, where a steady solution is achieved experimentally, with a maximum amplitude amplification of 3.2 at the wall.”

How the main claim is stated: asserted 1.00

What the abstract itself states, as probabilities: claims first 0.03 · states limitation 0.10 · human participants 0.04 · controlled comparison 0.04 · randomized assignment 0.01 · states quantitative result 0.99 · compares with prior results 0.32 · mentions code or data availability 0.05

The abstract, sentence by sentence

This table labels the abstract only (arXiv listing abstract v1). The number is the probability the classifier gave the label.

SentenceRoleThe authors' own workStates the main conclusionStrength
Experiments were carried out in {a} large wave basin ($27\times 30$\,m$^2$) to study the interactions of non-linear waves in shallow water (0.35\,m deep). method 0.89 0.95 0.03 asserted 0.98
A stereoscopic technique was used to measure the waves accurately over a vast area ($180$\,m$^2$). method 1.00 0.93 0.02 asserted 1.00
The numerical code {Tolosa-lct}, designed for simulating wave propagation in shallow water, reproduces the observations and extends the analysis for larger domains. method 0.94 0.78 0.09 asserted 1.00
The diffraction of oblique solitons is discussed. contribution 0.66 0.62 0.04 asserted 0.68
Mach interaction of two solitons occurs for some given incidence and amplitudes, producing a third soliton. result 0.98 0.75 0.16 asserted 0.76
A focus is made on the near resonant interaction of a soliton with a vertical wall. contribution 0.98 0.72 0.10 asserted 0.71
An example of a regular Mach interaction is shown, where a steady solution is achieved experimentally, with a maximum amplitude amplification of 3.2 at the wall. result 1.00 0.93 0.26 asserted 1.00

What kind of paper the classifier reports this is: empirical study 0.99 · evidence from observation or experiment 1.00

What was examined, and what was not

Sources read

  • arXiv listing abstract v1

Not examined

  • full text
  • figures and tables
  • references and citing sentences
  • relations to other papers

Levels run

  • P abstract

Not run

  • S sections
  • T body sentences
  • C citations
  • R cross-paper relations

How the labels were made

Compiled by classifier-1.13.0 via TypeSafe API, question bank abstract-p1-20260923, 2026-11-13: 1 request, 5,561 input tokens.

Every quoted sentence on this record is the authors'. Every label is from Pith's closed vocabulary, with the probability shown beside it. This record as JSON

Figures (12)
Figure 1 of the paper
Figure 1. Schematic top view of the wave tank: wavemakers on the left (they can move ±30 cm with respect to their mean position x = 0), areas covered by the stereoscopic systems (pair of pco cameras in red and pair of jai cameras in green), positions of wave gauges (blue circles). millimeters on the vertical axis z (Leduque et al. 2024). The cameras cannot measure within 0.5 m of the wall y = 0. Wave gauges were fixed at 0.01 m from this wall (at x = 8.5, 11, 13.5, 16, 19.4 m) to capture wave amplification against it. A detailed description of the experimental set-up is presented in Leduque…
Figure 2 of the paper
Figure 2. Video frames (from a camera located at x = 10 m, y = 30 m) of the passage of a wave against the wall y = 0, resulting from the generation of an oblique soliton (ϵ = 0.34, θ = −38◦). The wave propagates from right to left in this representation. Time interval between two successive images: ∆t = 0.43 s. Measurements of the maximum free surface elevation with wave gauges fixed to the wall (red dots). The dashed line is Miles strong interaction (Miles 1977a, eq. 5.11). 2.2 Numerical simulations Along with these experiments, numerical simulations of soliton interactions were car￾ried out…
Figure 3 of the paper
Figure 3. Stereoscopic measurements (top row) and simulation Tolosa-lct (bottom row) of the free￾surface elevation at different stages following the generation of two solitary waves. A: amplitude relative to water depth ϵ = 0.3, incidence θ = 0 generated at t = 19.7 s and B: ϵ = 0.13, θ = −60◦ at t = 39.5 s (t = 0 is the start of the backward motion of the paddles, indicated times are the start of the forward push). B’ and B” are the main resultants of B interactions. Each frame covers 27 m in x and 30 m in y. The arrows indicate the direction of propagation of the main wave resulting from…
Figure 5 of the paper
Figure 5. Measurements in Mach interaction for various incidence angles θi and three different series of runs (triangles, squares and circles): a relative amplitude of incident soliton ϵi measured by the gauge located at (x = 6.25 m, y = 8.50 m); b Miles parameter (10) (κm: small symbols) and Kodama & Yeh parameter (12) (κ: large symbols); c relative amplitude at the wall ϵw measured by four gauges located at y = 0.01 m and x = 8.50, 11.00, 13.50, 16.01 m; d amplitude amplification at the wall ϵw/ϵi. In c and d the symbols indicate the mean value, vertical bars indicate the minimum to maximum…
Figure 6 of the paper
Figure 6. Experimental results of a the amplification factor αw versus κm, the Miles parameter (10) and b the KP amplification factor ˆα versus Kodama and Yeh (2016)’s higher-order KP parameter κ (12). Generation of a single oblique soliton with various incidence angles and relative amplitudes measured at (x = 6.25 m, y = 8.50 m), same symbols as in
Figure 7 of the paper
Figure 7. Simulation with Tolosa-lct of three-wave interaction 3S: free surface elevation from stem generation, then one frame every 2 s. Each frame covers 27 m in x and 30 m in y. The stem produced in this interaction is remarkably stable, as shown by the time series extracted from the video measurements plotted in
Figure 8 of the paper
Figure 8. Stereoscopic measurements of the free surface elevation in the three-wave wall interaction 3S (thin lines). a Time series every 0.5 m along 0.5 ≤ y ≤ 7 m at x = 13.5 m, b every 0.5 m along 9.5 ≤ x ≤ 15.5 m at y = 1 m and c along 8.5 ≤ x ≤ 15.5 m at y = 6 m. The thick dashed lines are Rayleigh soliton profiles. parameters of the experiment, it has been possible to compensate for diffraction effects in a zone covering the soliton’s propagation over ten times its characteristic width. Such an observation gives credit to the second-order KP theory. The Tolosa-lct sim￾ulation reproduces…
Figure 9 of the paper
Figure 9. Profiles of the stem along y, experiment 3S. Stereoscopic measurements: jai profile at x = 13.5 m (thick solid line), pco profiles every 0.5 m in x (thin solid lines). The symbol (▷) corresponds to wave gauge measurements at (x = 13.5 m, y = 0.01 m). Tolosa simulation (thick dotted). The dashed grey line is a Rayleigh soliton profile that would propagate along y (for reference). The thick dashed line is Miles solution (14-15) for strong interaction for κ = 1.03 (ϵi = 0.171 and θi = −30.4 ◦)
Figure 10 of the paper
Figure 10. Snapshot of the free surface displacement (m) in the three-wave interaction 3S measured by stereoscopy. Prescribed angle of the first generated oblique soliton (white dashed, θi = −34◦) and best fit angles (black dashed, θi = −30.4 ◦ and θr = 30.4 ◦). The results of these simulations show that the stem requires a long establishment distance when κ ∼ 1, at the transition between irregular and regular interactions, in agreement with Li et al. (2011) and Knowles and Yeh (2019). In the irregular case, the stem rapidly acquires an equilibrium velocity that is that of the soliton…
Figure 11 of the paper
Figure 11. Snapshot of the free surface in the three-wave interaction 3S measured by stereoscopy (a) and corresponding simulation (b). a b
Figure 12 of the paper
Figure 12. Stem amplification at the wall (12-13) and comparison with Kodama and Yeh (2016)’s theory (solid line). a Extrapolated numerical results with Tolosa-lct in a 80 × 80 m2 tank for various incidence angles and amplitudes and without bottom friction. b Close-up around maximum resonance κ = 1 and Knowles and Yeh (2019)’s numerical results (blank symbols), for different angles: θi = 10◦ (□), θi = 15◦ (⋄), θi = 26◦ (◦). The quasi-steady 3-wave solution obtained with Tolosa-lct with bottom friction (blue star) and measured 3S (red triangle) are also plotted. For the latter, the error bars…

Showing 11 of the paper's 12 figures. Figures are the authors', reproduced from the paper.

References (32)
  1. [1] Bonneton, P., Chazel, F., Lannes, D., Marche, F., and Tissier, M. (2011). A splitting approach for the fully nonlinear and weakly dispersive G reen-- N aghdi model. J. Comput. Phys. , 230(4):1479--1498 on Pith
  2. [2] Chabchoub, A., Kimmoun, O., Branger, H., Hoffmann, N., Proment, D., Onorato, M., and Akhmediev, N. (2013). Experimental observation of dark solitons on the surface of water. Phys. Rev. Lett. , 110(12):124101 on Pith
  3. [3] Choi, J., Bokhove, O., Kalogirou, A., and Kelmanson, M. (2022). Numerical experiments on extreme waves through oblique--soliton interactions. Water Waves , 4(2):139--179 on Pith
  4. [4] Copie, F., Suret, P., and Randoux, S. (2025). Controlled manipulation of solitons in a recirculating fiber loop using external potentials. Phys. Rev. Res. , 7(4):043232 on Pith
  5. [5] Fache, L., Bonnefoy, F., Ducrozet, G., Copie, F., Novkoski, F., Ricard, G., Roberti, G., Falcon, E., Suret, P., El, G., et al. (2024). Interaction of soliton gases in deep-water surface gravity waves. Phys. Rev. E , 109(3):034207 on Pith
  6. [6] Funakoshi, M. (1980). Reflection of obliquely incident solitary waves. J. Phys. Soc. J. , 49(6):2371--2379 on Pith
  7. [7] Guizien, K. and Barth\'elemy, E. (2002). Accuracy of solitary wave generation by a piston wave maker. J. Hydraul. Res. , 40(3):321--331 on Pith
  8. [8] Kadomtsev, B. B. and Petviashvili, V. I. (1970). On the stability of solitary waves in weakly dispersing media. In Doklady Akademii Nauk , volume 192, pages 753--756. Russian Academy of Sciences on Pith
  9. [9] Knowles, J. and Yeh, H. (2019). Fourfold amplification of solitary-wave M ach reflection at a vertical wall. J. Fluid Mech. , 861:517--523 on Pith
  10. [10] Kodama, Y. (2010). KP solitons in shallow water. J. Phys. A: Math. Theor. , 43(43):434004 on Pith
  11. [11] Kodama, Y. and Yeh, H. (2016). The KP theory and Mach reflection. J. Fluid Mech. , 800:766--786 on Pith
  12. [12] Korteweg, D. J. and deVries, G. (1895). On the change of form of long waves advancing in a rectangular channel, and on a new type of long stationary waves. Phil. Mag. , 39(5):422--443 on Pith
  13. [13] Leduque, T. (2024). \'Etude exp\'erimentale et num\'erique d'ondes non-lin\'eaires multidirectionnelles en eau peu profonde: application aux gaz de solitons . PhD thesis, Univ. Grenoble Alpes on Pith
  14. [14] Leduque, T., Barth\'elemy, E., Michallet, H., Sommeria, J., and Mordant, N. (2024). Space-time statistics of 2D soliton gas in shallow water studied by stereoscopic surface mapping. Exp. Fluids , 65(84) on Pith
  15. [15] Leduque, T., Kaczmarek, M., Michallet, H., Barth\'elemy, E., and Mordant, N. (2025). From deep to shallow water 2D wave turbulence: E mergence of soliton gas. Phys. Rev. Fluids , 10(11):114801 on Pith
  16. [16] Li, W., Yeh, H., and Kodama, Y. (2011). On the M ach reflection of a solitary wave: revisited. J. Fluid Mech. , 672:326--357 on Pith
  17. [17] Miles, J. W. (1977a). Obliquely interacting solitary waves. J. Fluid Mech. , 79(1):157--169 on Pith
  18. [18] Miles, J. W. (1977b). Resonantly interacting solitary waves. J. Fluid Mech. , 79(1):171--179 on Pith
  19. [19] Nicolas, P. (1993). Utilisation de variables distordues dans la th\'eorie des ondes de gravit\'e: application \`a la r\'efraction et \`a la g\'en\'eration . PhD thesis, Univ. Joseph Fourier, Grenoble on Pith
  20. [20] Osborne, A. R. (2010). 30 - nonlinearity in duck pier data. In Osborne, A. R., editor, Nonlinear Ocean Waves and the Inverse Scattering Transform , volume 97 of International Geophysics , pages 779 -- 794. Academic Press on Pith
show 12 more
  1. [21] Perroud, P. H. (1957). The solitary wave reflection along a straight vertical wall at oblique incidence . PhD thesis, Univ. California on Pith
  2. [22] Rayleigh, J. W. S. (1876). On waves. Philos. Mag , 5(1):257--79 on Pith
  3. [23] Redor, I. (2019). \'Etude exp\'erimentale de la turbulence int\'egrable en eau peu profonde . PhD thesis, Univ. Grenoble Alpes on Pith
  4. [24] Redor, I., Barth\'elemy, E., Mordant, N., and Michallet, H. (2020). Analysis of soliton gas with large-scale video-based wave measurements. Exp. Fluids , 61(10) on Pith
  5. [25] Renouard, D.P., Seabra-Santos, F.J., and Temperville, A.M. (1985). Experimental study of the generation, damping, and reflexion of a solitary wave . Dyn. Atmos. Oceans , 9:341--356 on Pith
  6. [26] Richard, G. L. (2021). An extension of the Boussinesq-type models to weakly compressible flows . Eur. J. Mech.-B/Fluids , 89:217--240 on Pith
  7. [27] Russell, J. S. (1845). Report on Waves: Made to the Meetings of the British Association in 1842-43 on Pith
  8. [28] Ryskamp, S., Maiden, M. D., Biondini, G., and Hoefer, M. A. (2021). Evolution of truncated and bent gravity wave solitons: the Mach expansion problem. J. Fluid Mech. , 909:A24 on Pith
  9. [29] Tanaka, M. (1993). Mach reflection of a large-amplitude solitary wave. J. Fluid Mech. , 248:637--661 on Pith
  10. [30] Wang, C. and Pawlowicz, R. (2012). Oblique wave-wave interactions of nonlinear near-surface internal waves in the strait of georgia. Journal of Geophysical Research: Oceans , 117(C6) on Pith
  11. [31] Zabusky, N. J. and Kruskal, M. D. (1965). Interaction of ``solitons" in a collisionless plasma and the recurrence of initial states. Phys. Rev. Lett. , 15(6):240 on Pith
  12. [32] Zakharov, V. (1971). Kinetic equation for solitons. Sov. Phys. JETP , 33(3):538--540 on Pith

Challenges and discussion

Disagree with the review, or know something it missed? Leave a comment, or challenge this review formally: a challenge becomes a permanent entry in this paper's record, and its decision is published here.

No comments yet.

Sign in to comment