Pith.

Systems and Control · arXiv:2611.16806 v1 · submitted 12 Nov 2026 · 22 references

FlatSeek: LLM-Driven Symbolic Discovery of Flat Outputs via Backward Data Generation

Zihao Fu, Xingchen Li, Keyou You

The paper says

“Differential flatness enables efficient planning and control, but discovering explicit flat outputs for general nonlinear systems remains difficult due to the lack of general methods and supervised data.”

more of the abstract

We propose FlatSeek, a framework combining backward data generation with task-specific large language model (LLM) training. By reversing the defining reconstruction of flatness, we generate system-flat-output pairs with known certificates, then fine-tune an LLM to propose symbolic flat-output candidates for unseen dynamics. On literature and synthetic benchmarks, FlatSeek outperforms both the traditional symbolic methods and the untuned reference models in flat-output discovery success, and uncovers alternative symbolic flat outputs not reported in the literature.

from the abstract

Pith says

Machine review · deepseek-v4-flash · 13 Nov 2026 · what was read was not recorded · not checked by a person

It can be wrong. Challenge this review or reply to it.

Holds up, with conditions.

4 major objections · 7 minor

How often objections from reviews like this one are right: not yet measured

Are you an author? What you can do.

Not checked: figures, code, what the 22 references say.

The paper says, at Section III-A, Step 1

The review did not quote this passage.

Pith says: Objection 1 of 4 · major

The backward construction assumes that the first chain is unweighted (a_{1,k} ≡ 1) and that terminal weights are set to one. This imposes a structural template on the generated systems: the first output component's derivative appears directly as a state or input coordinate.

more of objection 1

While this is a valid construction, it biases the training data toward systems where y1 has a simple relationship to the dynamics. The paper does not discuss how this template might limit the diversity of flat-output structures the LLM learns to recognize. Since the synthetic test systems are generated by the same construction, the high hit rate on that benchmark (171/200) may partly reflect pattern matching to this template rather than general flat-output discovery. The literature benchmark is more independent, but the paper does not analyze how many of the 74 solved literature systems share structural features with the training template (e.g., similar chain lengths or weight patterns). This concern is acknowledged indirectly in the conclusion ('Future work will extend the search to systems for which existing methods have not yet produced a flat-output candidate'), but the potential template bias is not quantified or discussed as a limitation.

The paper says, at Section V-A, Evaluation protocol

The review did not quote this passage.

Pith says: Objection 2 of 4 · major

The verifier is described as checking 'a finite-order Jacobian-rank test for recoverability of the state and input from the output derivatives; candidates with differentially dependent components are rejected.' However, the paper does not specify the order up to which derivatives are considered, nor does it discuss the possibility of false negatives (rejecting a valid flat output because the required derivative …

more of objection 2

… order exceeds the verifier's truncation) or false positives (accepting a candidate that passes the finite-order test but fails at higher order). Since the verifier is the final arbiter of success, its reliability is load-bearing. The paper should provide more details on the verifier's implementation, including the maximum derivative order checked, the rank condition tolerance, and any validation of the verifier against known flat outputs.

The paper says, at Table I and Section V-B

The review did not quote this passage.

Pith says: Objection 3 of 4 · major

The comparison with traditional methods is informative, but the paper does not report the computational cost (e.g., wall-clock time, GPU hours) for FlatSeek versus the traditional methods. The traditional methods are given a 120-second limit per system, while FlatSeek uses an LLM with candidate generation and verification.

more of objection 3

Without cost information, it is difficult to assess the practical trade-off. Additionally, the paper should report the number of candidates that passed the verifier per system (not just whether at least one passed), to give a sense of the verifier's selectivity.

The paper says, at Section V-A, Training data

The review did not quote this passage.

Pith says: Objection 4 of 4 · major

The training corpus contains 12,375 base pairs, augmented to 37,125 rows. The paper states that the 200 synthetic test systems are 'structurally disjoint' from the training set, but does not define what constitutes a structural fingerprint or how disjointness is ensured.

more of objection 4

Given that both training and test sets are generated by the same backward construction, it is important to clarify the criteria for structural disjointness to rule out data leakage. The paper should provide a more precise description of how the test set was constructed and verified to be distinct from the training set.

7 minor objections

The paper says, at Abstract

Pith says: minor objection 1 of 7

The abstract states 'FlatSeek outperforms both the traditional symbolic methods and the untuned reference models in flat-output discovery success.' This is accurate, but it would be helpful to include the numerical results (74/83 and 171/200) in the abstract for immediate impact.

The paper says, at Section II-A, Definition 1

Pith says: minor objection 2 of 7

The definition of differential flatness uses r and q for derivative orders in the output map and reconstruction maps, respectively. However, in the backward construction (Section III), q is defined as max_i ℓ_i, which is the maximum chain length. The relationship between the general definition's q and the construction's q should be clarified.

show 5 more

The paper says, at Section III-A, Equation (5)

Pith says: minor objection 3 of 7

The notation D_y g is defined as the total time derivative for functions of y and its derivatives. However, the definition uses y^{(j+1)} without specifying that these are time derivatives. It might be clearer to write d/dt or use an overdot to avoid confusion with spatial derivatives.

The paper says, at Section III-B, Equation (15)

Pith says: minor objection 4 of 7

The shear transformation T_S(z) = z + e_j S(z_{-j}) is defined, but the notation z_{-j} is not explicitly defined. It is clear from context that it means the vector with the j-th component removed, but a brief definition would improve readability.

The paper says, at Section V-A, Baselines

Pith says: minor objection 5 of 7

The saddle–Jacobi baseline is described as enumerating m-element subsets of state and input coordinates and screening them using an order bound and a truncated determinant. This is a reasonable baseline, but the paper should cite the specific reference for this method (Kaminski and Ollivier, 2024) more explicitly in the baseline description.

This objection may describe the copy Pith gave the reviewer, not the paper.

The paper says, at Figure 5

Pith says: minor objection 6 of 7

The candidate budget ablation shows hit rates for K from 1 to 200. The figure labels are clear, but the y-axis label 'Hit rate (%)' is slightly misleading because the bars show absolute counts (e.g., 41, 89) rather than percentages. The text clarifies this, but the axis label should be consistent with the data shown.

The paper says, at Section VI

Pith says: minor objection 7 of 7

The conclusion mentions 'Future work will extend the search to systems for which existing methods have not yet produced a flat-output candidate.' This is a natural direction, but the paper could also discuss potential improvements to the backward construction to cover a wider class of systems (e.g., allowing weighted first chains or more general coordinate transformations).

What would settle it

Generate a new synthetic test set using a different backward construction variant: e.g., allow the first chain to be weighted (a_{1,k} not identically 1) or use non-shear coordinate transformations (e.g., polynomial diffeomorphisms with cross terms). If FlatSeek's hit rate drops significantly (e.g., below 100/200) on this out-of-template test set while the strongest traditional baseline holds steady, then the original synthetic benchmark overstates the method's generality.

from the skeptic's reading

How the review went

3 readings by deepseek-v4-flash · 13 Nov 2026

  1. Reader holds up, with conditions confidence high
  2. Skeptic partly agrees 8 s · 11,652 tokens read, 724 written
  3. Referee major revision: 4 major objections, 7 minor 14 s · 12,056 tokens read, 1,707 written

Not run on this paper: the editor, the simulated authors' defence.

Pith did not check this review's objections against the paper.

The review in full

The strongest objection

The paper's central claim is that FlatSeek discovers flat outputs for unseen dynamics. The synthetic benchmark (200 systems) is held out from the training corpus, but both training and test sets are generated by the same backward construction (Section III). The construction imposes a specific structural template: weighted derivative chains with the first chain unweighted, terminal weights set to one, and diversification only via shears and symbol renaming. The LLM could therefore learn to recognize the template's signature (e.g., the pattern of multiplicative couplings in the dynamics) rather than learning the general concept of flatness. The literature benchmark (83 systems) is more independent, but the paper does not report how many of the 74 solved literature systems share structural features with the training data (e.g., similar chain lengths or weight patterns). If the model's success on synthetic systems is largely template recognition, then its performance on genuinely novel dynamics—those that do not fit the backward construction's template—may be much lower. The paper acknowledges this indirectly in the conclusion ('Future work will extend the search to systems for which existing methods have not yet produced a flat-output candidate'), but does not quantify the template bias. This concern is load-bearing because the main evidence for the method's generality is the synthetic benchmark, and if that benchmark is structurally biased, the claimed improvement over baselines may not transfer to real-world systems outside the template.

The reader's weakest_assumption focuses on the backward construction's weight functions and domain conditions, which is related but not identical to my concern. The reader notes that the diversity of training data depends on manual choices, which is part of the template bias issue. However, the reader does not explicitly flag that the synthetic test set shares the same construction template as the training set, which is the core of my concern. The reader's verdict is CONDITIONAL, and I also recommend CONDITIONAL, but for a different reason: the reader emphasizes reproducibility (code/data release, error bars), while I emphasize the structural bias in the synthetic evaluation. Both are valid concerns, but mine is more directly about the validity of the central claim. I agree with the reader that the paper is well-motivated and technically sound, but the synthetic benchmark's construction bias is a load-bearing issue that the reader did not fully articulate. Therefore agreement_with_reader is 'partial'. The verdict should remain CONDITIONAL because the concern can be addressed by additional experiments (out-of-template test set) without requiring a fundamental rewrite. If the authors provide such evidence, the verdict could move to ACCEPT; if the concern is confirmed, the claim would need to be substantially qualified.

The referee's report

If the results hold, this work provides a practical approach to a long-standing open problem in nonlinear control: finding flat outputs for general nonlinear systems. The backward data generation technique is a clever way to create supervised training data where none existed. The combination of LLM generation with symbolic verification is a sensible division of labor. The empirical results are strong, with FlatSeek solving 74/83 literature systems and 171/200 synthetic systems, compared to 58/83 and 127/200 for the best traditional method. The discovery of alternative flat outputs not in the literature is a concrete demonstration of the method's utility. The paper is well-structured and the technical details are clearly presented.

Pith's reading of the paper (a machine's summary, not the authors')

Differential flatness is a property of some control systems that makes planning and control much easier: if a flat output is known, all states and inputs can be expressed directly from that output and its derivatives, without solving differential equations. Finding such an output for a given system is hard and usually done by hand. FlatSeek automates this search by first generating many example systems for which the flat output is known by construction. It does this by starting from a candidate flat output and working backward to derive a compatible system dynamics, then applying coordinate transformations to create diverse examples. These system-output pairs are used to fine-tune a small language model (Qwen3.5-2B) to propose flat-output candidates for new, unseen systems. A symbolic verifier checks each candidate by differentiating it along the dynamics and testing a rank condition. On a benchmark of 83 published systems, FlatSeek finds a valid flat output for 74 of them, compared to 58 for the best traditional method. It also discovers alternative flat outputs not previously reported in the literature.

Core claim. FlatSeek solves 74/83 literature systems and 171/200 synthetic systems for flat-output discovery, compared to 58/83 and 127/200 for the strongest traditional method, and uncovers alternative symbolic flat outputs not reported in the literature (Section V-B, Table I, Fig. 4).

The premise it rests on. The backward construction in Section III-A assumes that the chosen analytic weights a_i,k(y, ydot1) are nonzero on a regular domain and that the first chain is unweighted (a_1,k = 1). If the weights vanish or the domain is empty, the generated system is not flat or the flat output is not valid. The paper checks this condition (Algorithm 1, line 7), but the diversity of the training data depends on the manual choice of weight functions and chain lengths, which may not cover all possible flat-output structures.

Check this review

Pith stored no record of this review's passes and took no fingerprint of it. Reviews made by code from 13 Nov 2026 on carry both.

How often reviews like this one are right

Reviews like this one: written by deepseek-v4-flash, where what was read was not recorded.

How often objections from reviews like this one are right: not yet measured

Every value above, in the review's public record (JSON)

Reviews by people

This review was written by a machine. No person has reviewed this paper on Pith yet. A scientist listed on Pith can review it for a fee, and their review is published here whatever it concludes.

Request a human review

How Pith checks papers · The full audit of this paper

The paper

Abstract

Differential flatness enables efficient planning and control, but discovering explicit flat outputs for general nonlinear systems remains difficult due to the lack of general methods and supervised data. We propose FlatSeek, a framework combining backward data generation with task-specific large language model (LLM) training. By reversing the defining reconstruction of flatness, we generate system-flat-output pairs with known certificates, then fine-tune an LLM to propose symbolic flat-output candidates for unseen dynamics. On literature and synthetic benchmarks, FlatSeek outperforms both the traditional symbolic methods and the untuned reference models in flat-output discovery success, and uncovers alternative symbolic flat outputs not reported in the literature.

The paper's own sentences, arranged, kept beside the review and separate from it. Each label is drawn from a closed vocabulary; the number beside it is the probability the classifier gave that label. No sentence in this record was written by a model.

abstract compiled · 2026-11-13

The authors' main claim, as the classifier picked it out 1.00

“On literature and synthetic benchmarks, FlatSeek outperforms both the traditional symbolic methods and the untuned reference models in flat-output discovery success, and uncovers alternative symbolic flat outputs not reported in the literature.”

How the main claim is stated: asserted 1.00

What the abstract itself states, as probabilities: claims first 0.07 · states limitation 0.13 · human participants 0.03 · controlled comparison 0.91 · randomized assignment 0.01 · states quantitative result 0.05 · compares with prior results 0.98 · mentions code or data availability 0.03

The abstract, sentence by sentence

This table labels the abstract only (arXiv listing abstract v1). The number is the probability the classifier gave the label.

SentenceRoleThe authors' own workStates the main conclusionStrength
Differential flatness enables efficient planning and control, but discovering explicit flat outputs for general nonlinear systems remains difficult due to the lack of general methods and supervised data. background 0.52 0.05 0.03 asserted 1.00
We propose FlatSeek, a framework combining backward data generation with task-specific large language model (LLM) training. contribution 0.94 0.90 0.05 asserted 1.00
By reversing the defining reconstruction of flatness, we generate system-flat-output pairs with known certificates, then fine-tune an LLM to propose symbolic flat-output candidates for unseen dynamics. method 1.00 0.93 0.06 asserted 0.98
On literature and synthetic benchmarks, FlatSeek outperforms both the traditional symbolic methods and the untuned reference models in flat-output discovery success, and uncovers alternative symbolic flat outputs not reported in the literature. result 1.00 0.96 0.89 asserted 1.00

What kind of paper the classifier reports this is: method or tool 1.00 · evidence from simulation or computation 0.65

What was examined, and what was not

Sources read

  • arXiv listing abstract v1

Not examined

  • full text
  • figures and tables
  • references and citing sentences
  • relations to other papers

Levels run

  • P abstract

Not run

  • S sections
  • T body sentences
  • C citations
  • R cross-paper relations

How the labels were made

Compiled by classifier-1.13.0 via TypeSafe API, question bank abstract-p1-20260923, 2026-11-13: 1 request, 3,652 input tokens.

Every quoted sentence on this record is the authors'. Every label is from Pith's closed vocabulary, with the probability shown beside it. This record as JSON

Figures (5)
Figure 1 of the paper
Figure 1. Schematic of differential flatness. In a regular local region where the
Figure 2 of the paper
Figure 2. Overview of FlatSeek’s three stages: (1) backward data generation of system–flat-output pairs
Figure 3 of the paper
Figure 3. Prompt interface and one generated candidate. The dynamics are
Figure 4 of the paper
Figure 4. Two cases from the literature benchmark (SLIP: spring-loaded
Figure 5 of the paper
Figure 5. Candidate-budget ablation. Bars show hit rates and labels give hit counts. The shaded bar marks

Figures are the authors', reproduced from the paper.

References (22)
  1. [1] M. Fliess, J. L ´evine, P. Martin, and P. Rouchon, “Flatness and defect of non-linear systems: introductory theory and examples,”International Journal of Control, vol. 61, no. 6, pp. 1327–1361, 1995 on Pith
  2. [2] J. L´evine,Analysis and Control of Nonlinear Systems: A Flatness-based Approach. Springer, 2009 on Pith
  3. [3] P. Martin, R. M. Murray, and P. Rouchon, “Flat systems, equivalence and feedback,” inAdvances in the Control of Nonlinear Systems, ser. Lecture Notes in Control and Information Sciences, A. Ba ˜nos, F. Lamnabhi-Lagarrigue, and F. J. Montoya, Eds. London: Springer, 2001, vol. 2... on Pith
  4. [4] D. Mellinger and V . Kumar, “Minimum snap trajectory generation and control for quadrotors,” inProc. IEEE Int. Conf. Robotics and Automation (ICRA), 2011, pp. 2520–2525 on Pith
  5. [5] H. Sira-Ram´ırez and S. K. Agrawal,Differentially Flat Systems. Marcel Dekker, 2004 on Pith
  6. [6] C. Gst ¨ottner, B. Kolar, and M. Sch ¨oberl, “A flat system possessing no (x, u)-flat output,”IEEE Control Systems Letters, vol. 7, pp. 1033–1038, 2023 on Pith
  7. [7] L. R. Hunt, R. Su, and G. Meyer, “Global transformations of nonlinear systems,”IEEE Transactions on Automatic Control, vol. 28, no. 1, pp. 24–31, 1983 on Pith
  8. [8] B. Charlet, J. L ´evine, and R. Marino, “On dynamic feedback lin- earization,”Systems & Control Letters, vol. 13, no. 2, pp. 143–151, 1989 on Pith
  9. [9] J. L ´evine, “Differential flatness by pure prolongation: Necessary and sufficient conditions,”Communications in Optimization Theory, vol. 2025, 2025, Art. no. 11 on Pith
  10. [10] J.-B. Pomet, “A necessary condition for dynamic equivalence,”SIAM Journal on Control and Optimization, vol. 48, no. 2, pp. 925–940, 2009 on Pith
  11. [11] Y . J. Kaminski and F. Ollivier, “Flat singularities of chained systems, illustrated with an aircraft model,”Computational and Applied Mathe- matics, vol. 43, no. 3, 2024, Art. no. 135 on Pith
  12. [12] S. F. Ma, A. Zhao, and J.-Q. Sun, “Identification of linear flat outputs using neural networks—Examples of two-degree-of-freedom underactuated mechanical systems,”Mechanical Systems and Signal Processing, vol. 216, p. 111471, 2024 on Pith
  13. [13] A. Alfarano, F. Charton, and A. Hayat, “Global Lyapunov functions: a long-standing open problem in mathematics, with symbolic transform- ers,” inAdvances in Neural Information Processing Systems (NeurIPS), vol. 37, 2024, pp. 93 643–93 670 on Pith
  14. [14] B. Romera-Paredes, M. Barekatain, A. Novikov, M. Balog, M. P. Kumar,et al., “Mathematical discoveries from program search with large language models,”Nature, vol. 625, no. 7995, pp. 468–475, 2024 on Pith
  15. [15] J. Zhong, Z. Liu, Z. Wang, and S. Li, “Learning first integrals via backward-generated data and guided reinforcement learning,”arXiv preprint arXiv:2605.21160, 2026 on PithPith's reviewarXiv
  16. [16] E. J. Hu, Y . Shen, P. Wallis, Z. Allen-Zhu, Y . Li, S. Wang, L. Wang, and W. Chen, “LoRA: Low-rank adaptation of large language models,” inInternational Conference on Learning Representations (ICLR), 2022 on Pith
  17. [17] S. Messaoudi, F. Nicolau, M. Ghanes, L. Sbita, and J.-P. Barbot, “Flatness-based control strategy for n parallel connected boost choppers and n sources with differing characteristics,”IEEE Control Systems Letters, vol. 7, pp. 3084–3089, 2023 on Pith
  18. [18] H. Chen, P. M. Wensing, and W. Zhang, “Optimal control of a differentially flat two-dimensional spring-loaded inverted pendulum model,”IEEE Robotics and Automation Letters, vol. 5, no. 2, pp. 307–314, 2020 on Pith
  19. [19] J. L ´evine, “On necessary and sufficient conditions for differential flatness,”Applicable Algebra in Engineering, Communication and Computing, vol. 22, no. 1, pp. 47–90, 2011 on Pith
  20. [20] Qwen Team, “Qwen3.5: Towards native multimodal agents,” Blog post, Feb. 2026. [Online]. Available: https://qwen.ai/blog?id=qwen3.5 on Pith
show 2 more
  1. [21] D. Guo, D. Yang, H. Zhang, J. Song,et al., “DeepSeek-R1 incentivizes reasoning in LLMs through reinforcement learning,”Nature, vol. 645, pp. 633–638, 2025 on Pith
  2. [22] DeepSeek-AI, “DeepSeek-V4: Towards highly efficient million-token context intelligence,”arXiv preprint arXiv:2606.19348, 2026 on PitharXiv

Challenges and discussion

Disagree with the review, or know something it missed? Leave a comment, or challenge this review formally: a challenge becomes a permanent entry in this paper's record, and its decision is published here.

No comments yet.

Sign in to comment