Thrust Microstepping via Acceleration Feedback in Quadrotor Control for Aerial Grasping of Dynamic Payload

In this work, we propose an end-to-end Thrust Microstepping and Decoupled Control (TMDC) of quadrotors. TMDC focuses on precise off-centered aerial grasping of payloads dynamically, which are attached rigidly to the UAV body via a gripper contrary to the swinging payload. The dynamic payload grasping quickly changes UAV's mass, inertia etc, causing instability while performing a grasping operation in-air. We identify that to handle unknown payload grasping, the role of thrust controller is crucial. Hence, we focus on thrust control without involving system parameters such as mass etc. TMDC is based on our novel Thrust Microstepping via Acceleration Feedback (TMAF) thrust controller and Decoupled Motion Control (DMC). TMAF precisely estimates the desired thrust even at smaller loop rates while DMC decouples the horizontal and vertical motion to counteract disturbances in the case of dynamic payloads. We prove the controller's efficacy via exhaustive experiments in practically interesting and adverse real-world cases, such as fully onboard state estimation without any positioning sensor, narrow and indoor flying workspaces with intense wind turbulence, heavy payloads, non-uniform loop rates, etc. Our TMDC outperforms recent direct acceleration feedback thrust controller (DA) and geometric tracking control (GT) in flying stably for aerial grasping and achieves RMSE below 0.04m in contrast to 0.15m of DA and 0.16m of GT.