GEO600 beam splitter thermal compensation system: new design and commissioning

Gravitational waves have revolutionised the field of astronomy by providing scientists with a new way to observe the universe and gain a better understanding of exotic objects like black holes. Several large-scale laser interferometric gravitational wave detectors (GWDs) have been constructed worldwide, with a focus on achieving the best sensitivity possible. However, in order for a detector to operate at its intended sensitivity, its optics must be free from imperfections such as thermal lensing effects. In the GEO\,600 gravitational wave detector, the beam splitter (BS) experiences a significant thermal lensing effect due to the high power build-up in the Power Recycling Cavity (PRC) combined with a very small beam waist. This causes the fundamental mode to be converted into higher order modes (HOMs), subsequently impacting the detector's performance. To address this issue, the GEO\,600 detector is equipped with a thermal compensation system (TCS) applied to the BS. This involves projecting a spatially tunable heating pattern through an optical system onto the beam splitter. The main objective of the TCS is to counteract the thermal lens at the BS and restore the detector to its ideal operating condition. This paper presents the new beam splitter TCS in GEO\,600, its commissioning, and its effect on strain sensitivity. It also outlines the planned upgrade to further enhance the performance of the TCS.