REVIEW 1 cited by
Vortex Motion Induced Losses in Tantalum Resonators
Not yet reviewed by Pith; the record is open.
This paper has not been read by Pith yet. Machine review is queued; the pith claim, tier, and objections will appear here once it completes.
SPECIMEN: schema-true, not a live event
T0 review · schema-true
One-sentence machine reading of the paper's core claim.
pith:XXXXXXXX · record.json · timestamp
read the original abstract
Tantalum (Ta) based superconducting circuits have been demonstrated to enable record qubit coherence times and quality factors, motivating a careful study of the microscopic origin of the remaining losses that limit their performance. We have recently shown that the losses in Ta-based resonators are dominated by two-level systems (TLSs) at low microwave powers and millikelvin temperatures. We also observe that some devices exhibit loss that is exponentially activated at a lower temperature inconsistent with the superconducting critical temperature (Tc) of the constituent film. Specifically, dc resistivity measurements show a Tc of over 4 K, while microwave measurements of resonators fabricated from these films show losses that increase exponentially with temperature with an activation energy as low as 0.3 K. Here, we present a comparative study of the structural and thermodynamic properties of Ta-based resonators and identify vortex motion-induced loss as the source of thermally activated microwave loss. Through careful magnetoresistance and x-ray diffraction measurements, we observe that the increased loss occurs for films that are in the clean limit, where the superconducting coherence length is shorter than the mean free path. Vortex motion-induced losses are suppressed for films in the dirty limit, which show evidence of structural defects that can pin vortices. We verify this hypothesis by explicitly pinning vortices via patterning and find that we can suppress the loss by microfabrication.
Forward citations
Cited by 1 Pith paper
-
Krypton-sputtered tantalum films for scalable high-performance quantum devices
Krypton-sputtered tantalum forms the desired BCC phase on silicon at 200°C with state-of-the-art microwave performance in resonators and qubits.
Discussion (0). Continue with ORCID to comment.