Finite-time thermodynamics: A journey beginning with optimizing heat engines

Xiu-Hua Zhao; Yu-Han Ma

arxiv: 2411.03853 · v1 · pith:4MESMTGQnew · submitted 2024-11-06 · ❄️ cond-mat.stat-mech · physics.app-ph· physics.class-ph· quant-ph

Finite-time thermodynamics: A journey beginning with optimizing heat engines

Yu-Han Ma , Xiu-Hua Zhao This is my paper

Pith reviewed 2026-05-23 17:47 UTC · model grok-4.3

classification ❄️ cond-mat.stat-mech physics.app-phphysics.class-phquant-ph

keywords finite-time thermodynamicsheat enginesthermodynamic cyclesoptimal controlunconventional enginesexperimental progressthermodynamic optimization

0 comments

The pith

Finite-time thermodynamics has developed from heat engine optimization into a framework covering cycle constraints, process control, unconventional engines, and experiments.

A machine-rendered reading of the paper's core claim, the machinery that carries it, and where it could break.

The paper traces the origins of finite-time thermodynamics to early efforts at optimizing heat engines that must run in limited time. It then reviews research from the past two decades on the basic limits that finite operation times impose on thermodynamic cycles. The work examines techniques for optimal control and optimization of processes, the performance of nonstandard heat engines, and experimental realizations of these ideas. A reader would care because the results apply directly to the design of real engines and devices that cannot operate at equilibrium.

Core claim

The paper establishes a historical narrative of finite-time thermodynamics beginning with heat engine optimization and surveys recent advances on the fundamental constraints of finite-time cycles, optimal control methods for thermodynamic processes, the operation of unconventional heat engines, and experimental progress in the field.

What carries the argument

Finite-time thermodynamics, the approach that incorporates the effects of limited operation time on thermodynamic cycles and processes.

Load-bearing premise

The selection of literature and topics over the past two decades is representative of the full scope and key advances in the field without major omissions or bias in coverage.

What would settle it

Discovery of major recent results on finite-time cycle constraints or experimental engine performance that are absent from the review would show the coverage is incomplete.

read the original abstract

In this paper, we summarize the historical development of finite-time thermodynamics and review the current state of research over the past two decades in this field, focusing on fundamental constraints of finite-time thermodynamic cycles, optimal control and optimization of thermodynamic processes, the operation of unconventional heat engines, and experimental progress.

Editorial analysis

A structured set of objections, weighed in public.

Desk editor's note, referee report, simulated authors' rebuttal, and a circularity audit. Tearing a paper down is the easy half of reading it; the pith above is the substance, this is the friction.

Desk Editor's Note private letter to a colleague

This is a review paper that organizes existing literature on finite-time thermodynamics but adds no new derivations or results.

read the letter

This paper is a review that traces the start of finite-time thermodynamics from heat engine optimization and then summarizes work from the past two decades on cycle constraints, optimal control, unconventional engines, and experiments. It presents no original math, data, or first-principles claims. The abstract makes that explicit, and the structure follows the standard pattern of collecting and grouping prior results. That is the main thing to know: it is a consolidation exercise, not an advance. What it does reasonably well is lay out the historical thread and separate the topics into clear sections. A reader who wants a single place to see how the field moved from early bounds to later optimization studies and lab work can get that overview without hunting through many papers. The organization itself is straightforward and follows the topics listed in the abstract. The soft spots are the usual ones for any review. Coverage depends entirely on the authors' choices of what counts as key work over twenty years. Without an explicit statement of search criteria or a discussion of why certain lines were left out, it is hard to know if the summary is balanced or if important constraints and experiments were missed. The paper also does not attempt to resolve open questions or introduce a new organizing principle, so its value stays at the level of a literature map rather than a synthesis that changes how people think about the problems. This paper is for someone entering the subfield or needing a quick map of recent activity. A specialist already working on these cycles will not find new technical content to use. It shows clear enough thinking in how it groups the material, with no internal contradictions visible from the abstract. I would bring it to a reading group only if the group is already focused on finite-time thermodynamics and wants to discuss coverage gaps. I would not cite it in my own papers because it contains no new results to build on. A serious editor should send it to peer review so referees can check whether the literature selection is representative and whether the summaries of the cited papers are accurate. Reviews that are thorough can save time for the community even when they do not break new ground.

Referee Report

0 major / 2 minor

Summary. The manuscript is a review paper that summarizes the historical development of finite-time thermodynamics, beginning with the optimization of heat engines, and surveys research over the past two decades. It focuses on fundamental constraints of finite-time thermodynamic cycles, optimal control and optimization of thermodynamic processes, the operation of unconventional heat engines, and experimental progress.

Significance. As a review without new derivations, models, or data, the manuscript's value would lie in providing a consolidated overview and historical framing for the cond-mat.stat-mech community. Credit is due for the explicit scope statement in the abstract and the choice to anchor the narrative in the classic heat-engine optimization problem, which is a standard and falsifiable entry point for the field.

minor comments (2)

[Abstract] The abstract states the four focus areas but does not indicate the approximate number of references or the cutoff date for the 'past two decades' coverage; adding one sentence would improve clarity for readers.
[Title] The title uses 'a journey beginning with' phrasing that is informal for a journal review; a more direct subtitle such as 'A review of constraints, optimization, and experiments' would align better with conventional review titles.

Simulated Author's Rebuttal

0 responses · 0 unresolved

We thank the referee for their thorough reading and positive evaluation of the manuscript. The report correctly identifies the paper as a review without new derivations and notes its value in providing a consolidated overview anchored in the classic heat-engine problem. We appreciate the recommendation to accept.

Circularity Check

0 steps flagged

No significant circularity in review paper

full rationale

This is a review paper that summarizes historical development and existing literature on finite-time thermodynamics without presenting new derivations, models, predictions, or fitted parameters. No load-bearing steps exist that reduce by construction to the paper's own inputs, self-citations, or ansatzes. External citations support the summary and do not form a self-referential chain for original claims. The paper is self-contained as a literature review against external benchmarks.

Axiom & Free-Parameter Ledger

0 free parameters · 0 axioms · 0 invented entities

This is a review paper whose central contribution is the accuracy and completeness of its literature summary. No new free parameters, axioms, or invented entities are introduced by the authors themselves; any such elements would reside in the reviewed primary literature.

pith-pipeline@v0.9.0 · 5568 in / 1055 out tokens · 21576 ms · 2026-05-23T17:47:43.385845+00:00 · methodology

discussion (0)

Forward citations

Cited by 1 Pith paper

Reviewed papers in the Pith corpus that reference this work. Sorted by Pith novelty score.

Revisiting Endo-reversible Carnot engine: Extending the Yvon engine
cond-mat.stat-mech 2024-12 unverdicted novelty 4.0

The extended Yvon engine is equivalent to the Curzon-Ahlborn engine as the steady-state and cyclic forms of the endo-reversible Carnot heat engine.

Reference graph

Works this paper leans on

131 extracted references · 131 canonical work pages · cited by 1 Pith paper

[1]

Smil, Energy and Civilization: A History (The MIT Press, Cambridge, 2017)

V. Smil, Energy and Civilization: A History (The MIT Press, Cambridge, 2017)

work page 2017
[2]

Carnot, R´ eﬂexions sur la puissance motrice du feu et sur les machines propres a d´ evelopper cette puissance, Annales scientiﬁques de l’ ´Ecole Normale Sup´ erieure1, 393 (1872)

S. Carnot, R´ eﬂexions sur la puissance motrice du feu et sur les machines propres a d´ evelopper cette puissance, Annales scientiﬁques de l’ ´Ecole Normale Sup´ erieure1, 393 (1872)

work page
[3]

Carnot, Reﬂections on the Motive Power of Heat: From the Original French of N.-L.-S

S. Carnot, Reﬂections on the Motive Power of Heat: From the Original French of N.-L.-S. Carnot (Wiley, New York, 1897)

work page
[4]

H. B. Callen, Thermodynamics and an Introduction to Thermostatistics, 2nd ed. (Wiley, New York, 1991)

work page 1991
[5]

Bejan, Advanced Engineering Thermodynamics , 4th ed

A. Bejan, Advanced Engineering Thermodynamics , 4th ed. (Wiley, Hoboken, 2016)

work page 2016
[6]

Andresen, P

B. Andresen, P. Salamon, and R. S. Berry, Thermo- dynamics in ﬁnite time: Extremals for imperfect heat engines, J. Chem. Phys. 66, 1571 (1977)

work page 1977
[7]

Yvon, Saclay Reactor: Acquired Knowledge by Two Years Experience in Heat Transfer Using Compressed Gas, Tech

J. Yvon, Saclay Reactor: Acquired Knowledge by Two Years Experience in Heat Transfer Using Compressed Gas, Tech. Rep. (CEA Saclay, France, 1955)

work page 1955
[8]

Chambadal, Les centrales nucl´ eaires(Armand Colin, Paris, 1957)

P. Chambadal, Les centrales nucl´ eaires(Armand Colin, Paris, 1957)

work page 1957
[9]

I. I. Novikov, Eﬃciency of an atomic power generating installation, The Soviet Journal of Atomic Energy 3, 1269 (1957)

work page 1957
[10]

F. L. Curzon and B. Ahlborn, Eﬃciency of a carnot engine at maximum power output, Am. J. Phys. 43, 22 (1975)

work page 1975
[11]

R. S. Berry, P. Salamon, and B. Andresen, eds., Finite-Time Thermodynamics (MDPI - Multidisci- plinary Digital Publishing Institute, 2022)

work page 2022
[12]

De Vos, Eﬃciency of some heat engines at maximum- power conditions, Am

A. De Vos, Eﬃciency of some heat engines at maximum- power conditions, Am. J. Phys. 53, 570 (1985)

work page 1985
[13]

Sahin, A

B. Sahin, A. Kodal, and H. Yavuz, Eﬃciency of a joule-brayton engine at maximum power density, J. Phys. D: Appl. Phys. 28, 1309 (1995)

work page 1995
[14]

Feldmann, E

T. Feldmann, E. Geva, R. Kosloﬀ, and P. Salamon, Heat engines in ﬁnite time governed by master equa- tions, Am. J. Phys. 64, 485 (1996)

work page 1996
[15]

L. Chen, C. Wu, F. Sun, and S. Cao, Heat transfer eﬀects on the net work output and eﬃ- ciency characteristics for an air-standard otto cycle, Energy Conv. Manag. 39, 643 (1998)

work page 1998
[16]

S. C. Kaushik and S. Kumar, Finite time thermody- namic analysis of endoreversible stirling heat engine with regenerative losses, Energy 25, 989 (2000) . 5

work page 2000
[17]

Kosloﬀ, A quantum mechanical open system as a model of a heat engine, J

R. Kosloﬀ, A quantum mechanical open system as a model of a heat engine, J. Chem. Phys. 80, 1625 (1984)

work page 1984
[18]

Van den Broeck, Thermodynamic eﬃciency at max- imum power, Phys

C. Van den Broeck, Thermodynamic eﬃciency at max- imum power, Phys. Rev. Lett. 95, 190602 (2005)

work page 2005
[19]

Schmiedl and U

T. Schmiedl and U. Seifert, Eﬃciency at maximum power: An analytically solvable model for stochastic heat engines, Europhys. Lett. 81, 20003 (2007)

work page 2007
[20]

Z. C. Tu, Eﬃciency at maximum power of feynman’s ratchet as a heat engine, J. Phys. A: Math. Theor. 41, 312003 (2008)

work page 2008
[21]

A. E. Allahverdyan, R. S. Johal, and G. Mahler, Work extremum principle: Structure and function of quantum heat engines, Phys. Rev. E 77, 041118 (2008)

work page 2008
[22]

Esposito, R

M. Esposito, R. Kawai, K. Lindenberg, and C. Van den Broeck, Eﬃciency at maximum power of low-dissipation carnot engines, Phys. Rev. Lett. 105, 150603 (2010)

work page 2010
[23]

Izumida and K

Y. Izumida and K. Okuda, Eﬃciency at maximum power of minimally nonlinear irreversible heat engines, Europhys. Lett. 97, 10004 (2012)

work page 2012
[24]

Sheng and Z

S. Sheng and Z. C. Tu, Constitutive relation for nonlinear response and universality of eﬃciency at maximum power for tight-coupling heat engines, Phys. Rev. E 91, 022136 (2015)

work page 2015
[25]

Chen, C.-P

J.-F. Chen, C.-P. Sun, and H. Dong, Achieve higher eﬃciency at maximum power with ﬁnite-time quantum otto cycle, Phys. Rev. E 100, 062140 (2019)

work page 2019
[26]

Shiraishi, K

N. Shiraishi, K. Saito, and H. Tasaki, Universal trade-oﬀ relation between power and eﬃciency for heat engines, Phys. Rev. Lett. 117, 190601 (2016)

work page 2016
[27]

Chen and Z

L. Chen and Z. Yan, The eﬀect of heat-transfer law on performance of a two-heat-source endoreversible cycle, J. Chem. Phys. 90, 3740 (1989)

work page 1989
[28]

Holubec and A

V. Holubec and A. Ryabov, Maximum eﬃciency of low-dissipation heat engines at arbitrary power, J. Stat. Mech.-Theory Exp. 2016, 073204 (2016)

work page 2016
[29]

Y.-H. Ma, D. Xu, H. Dong, and C.-P. Sun, Universal constraint for eﬃciency and power of a low-dissipation heat engine, Phys. Rev. E 98, 042112 (2018)

work page 2018
[30]

Abiuso and M

P. Abiuso and M. Perarnau-Llobet, Opti- mal Cycles for Low-Dissipation Heat Engines, Phys. Rev. Lett. 124, 110606 (2020)

work page 2020
[31]

Brandner and K

K. Brandner and K. Saito, Thermodynamic Geometry of Microscopic Heat Engines, Phys. Rev. Lett. 124, 040602 (2020)

work page 2020
[32]

Pietzonka and U

P. Pietzonka and U. Seifert, Universal Trade-Oﬀ be- tween Power, Eﬃciency, and Constancy in Steady-State Heat Engines, Phys. Rev. Lett. 120, 190602 (2018)

work page 2018
[33]

Holubec and A

V. Holubec and A. Ryabov, Cycling Tames Power Fluctuations near Optimum Eﬃciency, Phys. Rev. Lett. 121, 120601 (2018)

work page 2018
[34]

H. J. D. Miller, M. H. Mohammady, M. Perarnau- Llobet, and G. Guarnieri, Thermodynamic Uncertainty Relation in Slowly Driven Quantum Heat Engines, Phys. Rev. Lett. 126, 210603 (2021)

work page 2021
[35]

Y.-H. Ma, D. Xu, H. Dong, and C.-P. Sun, Optimal op- erating protocol to achieve eﬃciency at maximum power of heat engines, Phys. Rev. E 98, 022133 (2018)

work page 2018
[36]

Y. H. Chen, J.-F. Chen, Z. Fei, and H. T. Quan, Microscopic theory of the Curzon-Ahlborn heat engine based on a Brownian particle, Phys. Rev. E 106, 024105 (2022)

work page 2022
[37]

Salamon and R

P. Salamon and R. S. Berry, Thermody- namic Length and Dissipated Availability, Phys. Rev. Lett. 51, 1127 (1983)

work page 1983
[38]

G. E. Crooks, Measuring Thermodynamic Length, Phys. Rev. Lett. 99, 100602 (2007)

work page 2007
[39]

D. A. Sivak and G. E. Crooks, Ther- modynamic Metrics and Optimal Paths, Phys. Rev. Lett. 108, 190602 (2012)

work page 2012
[40]

P. R. Zulkowski, D. A. Sivak, G. E. Crooks, and M. R. DeWeese, Geometry of thermodynamic control, Phys. Rev. E 86, 041148 (2012)

work page 2012
[41]

Li and Z

G. Li and Z. Tu, Nonequilibrium work rela- tions meet engineered thermodynamic control: A perspective for nonequilibrium measurements, Europhys. Lett. 142, 61001 (2023)

work page 2023
[42]

Gu´ ery-Odelin, C

D. Gu´ ery-Odelin, C. Jarzynski, C. A. Plata, A. Prados, and E. Trizac, Driving rapidly while remaining in con- trol: Classical shortcuts from Hamiltonian to stochastic dynamics, Rep. Prog. Phys. 86, 035902 (2023)

work page 2023
[43]

Van Vu and Y

T. Van Vu and Y. Hasegawa, Geometrical Bounds of the Irreversibility in Markovian Systems, Phys. Rev. Lett. 126, 010601 (2021)

work page 2021
[44]

Wang and J

Z. Wang and J. Ren, Thermodynamic geometry of nonequilibrium ﬂuctuations in cyclically driven trans- port, Phys. Rev. Lett. 132, 207101 (2024)

work page 2024
[45]

Zhong and M

A. Zhong and M. R. DeWeese, Beyond Lin- ear Response: Equivalence between Thermo- dynamic Geometry and Optimal Transport, Phys. Rev. Lett. 133, 057102 (2024)

work page 2024
[46]

Ma, R.-X

Y.-H. Ma, R.-X. Zhai, J. Chen, C. P. Sun, and H. Dong, Experimental Test of the 1 /τ -Scaling En- tropy Generation in Finite-Time Thermodynamics, Phys. Rev. Lett. 125, 210601 (2020)

work page 2020
[47]

Nakazato and S

M. Nakazato and S. Ito, Geometrical aspects of entropy production in stochastic thermodynamics based on wasserstein distance, Phys. Rev. Res. 3, 043093 (2021)

work page 2021
[48]

Schmiedl and U

T. Schmiedl and U. Seifert, Optimal ﬁnite- time processes in stochastic thermodynamics, Phys. Rev. Lett. 98, 108301 (2007)

work page 2007
[49]

Gomez-Marin, T

A. Gomez-Marin, T. Schmiedl, and U. Seifert, Optimal protocols for minimal work processes in underdamped stochastic thermodynamics, J. Chem. Phys. 129, 024114 (2008)

work page 2008
[50]

Aurell, C

E. Aurell, C. Mej ´ ıa-Monasterio, and P. Muratore- Ginanneschi, Optimal protocols and opti- mal transport in stochastic thermodynamics, Phys. Rev. Lett. 106, 250601 (2011)

work page 2011
[51]

P. R. Zulkowski and M. R. DeWeese, Optimal control of overdamped systems, Phys. Rev. E 92, 032117 (2015)

work page 2015
[52]

M. C. Engel, J. A. Smith, and M. P. Brenner, Optimal control of nonequilibrium systems through automatic diﬀerentiation, Phys. Rev. X 13, 041032 (2023)

work page 2023
[53]

G. Li, H. T. Quan, and Z. C. Tu, Shortcuts to isothermality and nonequilibrium work relations, Phys. Rev. E 96, 012144 (2017)

work page 2017
[54]

Li, J.-F

G. Li, J.-F. Chen, C. P. Sun, and H. Dong, Geodesic Path for the Minimal Energy Cost in Shortcuts to Isothermality, Phys. Rev. Lett. 128, 230603 (2022)

work page 2022
[55]

J. A. C. Albay, P.-Y. Lai, and Y. Jun, Re- alization of ﬁnite-rate isothermal compression and expansion using optical feedback trap, Appl. Phys. Lett. 116, 103706 (2020)

work page 2020
[56]

Chen, Optimizing brownian heat engine with shortcut strategy, Phys

J.-F. Chen, Optimizing brownian heat engine with shortcut strategy, Phys. Rev. E 106, 054108 (2022)

work page 2022
[57]

Zhao, Z.-N

X.-H. Zhao, Z.-N. Gong, and Z. C. Tu, Low-dissipation engines: Microscopic construction via shortcuts to adia- 6 baticity and isothermality, the optimal relation between power and eﬃciency, Phys. Rev. E 106, 064117 (2022)

work page 2022
[58]

R. Dann, A. Tobalina, and R. Kosloﬀ, Short- cut to Equilibration of an Open Quantum System, Phys. Rev. Lett. 122, 250402 (2019)

work page 2019
[59]

Pancotti, M

N. Pancotti, M. Scandi, M. T. Mitchison, and M. Perarnau-Llobet, Speed-Ups to Isothermal- ity: Enhanced Quantum Thermal Machines through Control of the System-Bath Coupling, Phys. Rev. X 10, 031015 (2020)

work page 2020
[60]

Ma, Simple realization of the poly- tropic process with a ﬁnite-sized reservoir, Am

Y.-H. Ma, Simple realization of the poly- tropic process with a ﬁnite-sized reservoir, Am. J. Phys. 91, 555 (2023)

work page 2023
[61]

M. J. Ondrechen, B. Andresen, M. Mozurkewich, and R. S. Berry, Maximum work from a ﬁnite reservoir by sequential Carnot cycles, Am. J. Phys. 49, 681 (1981)

work page 1981
[62]

R. S. Johal and R. Rai, Near-equilibrium uni- versality and bounds on eﬃciency in quasi- static regime with ﬁnite source and sink, Europhys. Lett. 113, 10006 (2016)

work page 2016
[63]

Izumida and K

Y. Izumida and K. Okuda, Work Output and Eﬃ- ciency at Maximum Power of Linear Irreversible Heat Engines Operating with a Finite-Sized Heat Source, Phys. Rev. Lett. 112, 180603 (2014)

work page 2014
[64]

Ma, Eﬀect of Finite-Size Heat Source’s Heat Capacity on the Eﬃciency of Heat Engine, Entropy 22, 1002 (2020)

Y.-H. Ma, Eﬀect of Finite-Size Heat Source’s Heat Capacity on the Eﬃciency of Heat Engine, Entropy 22, 1002 (2020)

work page 2020
[65]

Yuan, Y.-H

H. Yuan, Y.-H. Ma, and C. P. Sun, Optimizing thermodynamic cycles with two ﬁnite-sized reservoirs, Phys. Rev. E 105, L022101 (2022)

work page 2022
[66]

Quan, Maximum eﬃciency of ideal heat engines based on a small system: Correc- tion to the carnot eﬃciency at the nanoscale, Phys

H. Quan, Maximum eﬃciency of ideal heat engines based on a small system: Correc- tion to the carnot eﬃciency at the nanoscale, Phys. Rev. E 89, 062134 (2014)

work page 2014
[67]

Fei and Y.-H

Z. Fei and Y.-H. Ma, Temperature ﬂuctuations in meso- scopic systems, Physical Review E 109, 044101 (2024)

work page 2024
[68]

Niedenzu and G

W. Niedenzu and G. Kurizki, Cooperative many- body enhancement of quantum thermal machine power, New J. Phys. 20, 113038 (2018)

work page 2018
[69]

Vroylandt, M

H. Vroylandt, M. Esposito, and G. Verley, Col- lective eﬀects enhancing power and eﬃciency, Europhys. Lett. 120, 30009 (2018)

work page 2018
[70]

C. L. Latune, I. Sinayskiy, and F. Petruccione, Collective heat capacity for quantum ther- mometry and quantum engine enhancements, New J. Phys. 22, 083049 (2020)

work page 2020
[71]

F. S. Filho, G. A. L. For˜ ao, D. M. Busiello, B. Cleuren, and C. E. Fiore, Powerful ordered collective heat en- gines, Phys. Rev. Res. 5, 043067 (2023)

work page 2023
[72]

Rolandi, P

A. Rolandi, P. Abiuso, and M. Perarnau-Llobet, Col- lective Advantages in Finite-Time Thermodynamics, Phys. Rev. Lett. 131, 210401 (2023)

work page 2023
[73]

Campisi and R

M. Campisi and R. Fazio, The power of a critical heat engine, Nat. Commun. 7, 11895 (2016)

work page 2016
[74]

Holubec and A

V. Holubec and A. Ryabov, Work and power ﬂuctuations in a critical heat engine, Phys. Rev. E 96, 030102 (2017)

work page 2017
[75]

Ma, S.-H

Y.-H. Ma, S.-H. Su, and C.-P. Sun, Quantum ther- modynamic cycle with quantum phase transition, Phys. Rev. E 96, 022143 (2017)

work page 2017
[76]

Liang, Y.-H

S. Liang, Y.-H. Ma, D. M. Busiello, and P. D. L. Rios, A minimal model for carnot eﬃciency at maximum power, arXiv preprint arXiv:2312.02323 10.48550/arXiv.2312.02323 (2023)

work page doi:10.48550/arxiv.2312.02323 2023
[77]

Verley, M

G. Verley, M. Esposito, T. Willaert, and C. Van den Broeck, The unlikely carnot eﬃciency, Nat. commun. 5, 4721 (2014)

work page 2014
[78]

Denzler and E

T. Denzler and E. Lutz, Eﬃciency ﬂuc- tuations of a quantum heat engine, Phys. Rev. Res. 2, 032062 (2020)

work page 2020
[79]

Fei, J.-F

Z. Fei, J.-F. Chen, and Y.-H. Ma, Eﬃ- ciency statistics of a quantum otto cycle, Phys. Rev. A 105, 022609 (2022)

work page 2022
[80]

M. O. Scully, M. S. Zubairy, G. S. Agarwal, and H. Walther, Extracting Work from a Sin- gle Heat Bath via Vanishing Quantum Coherence, Science 299, 862 (2003)

work page 2003

Showing first 80 references.

[1] [1]

Smil, Energy and Civilization: A History (The MIT Press, Cambridge, 2017)

V. Smil, Energy and Civilization: A History (The MIT Press, Cambridge, 2017)

work page 2017

[2] [2]

Carnot, R´ eﬂexions sur la puissance motrice du feu et sur les machines propres a d´ evelopper cette puissance, Annales scientiﬁques de l’ ´Ecole Normale Sup´ erieure1, 393 (1872)

S. Carnot, R´ eﬂexions sur la puissance motrice du feu et sur les machines propres a d´ evelopper cette puissance, Annales scientiﬁques de l’ ´Ecole Normale Sup´ erieure1, 393 (1872)

work page

[3] [3]

Carnot, Reﬂections on the Motive Power of Heat: From the Original French of N.-L.-S

S. Carnot, Reﬂections on the Motive Power of Heat: From the Original French of N.-L.-S. Carnot (Wiley, New York, 1897)

work page

[4] [4]

H. B. Callen, Thermodynamics and an Introduction to Thermostatistics, 2nd ed. (Wiley, New York, 1991)

work page 1991

[5] [5]

Bejan, Advanced Engineering Thermodynamics , 4th ed

A. Bejan, Advanced Engineering Thermodynamics , 4th ed. (Wiley, Hoboken, 2016)

work page 2016

[6] [6]

Andresen, P

B. Andresen, P. Salamon, and R. S. Berry, Thermo- dynamics in ﬁnite time: Extremals for imperfect heat engines, J. Chem. Phys. 66, 1571 (1977)

work page 1977

[7] [7]

Yvon, Saclay Reactor: Acquired Knowledge by Two Years Experience in Heat Transfer Using Compressed Gas, Tech

J. Yvon, Saclay Reactor: Acquired Knowledge by Two Years Experience in Heat Transfer Using Compressed Gas, Tech. Rep. (CEA Saclay, France, 1955)

work page 1955

[8] [8]

Chambadal, Les centrales nucl´ eaires(Armand Colin, Paris, 1957)

P. Chambadal, Les centrales nucl´ eaires(Armand Colin, Paris, 1957)

work page 1957

[9] [9]

I. I. Novikov, Eﬃciency of an atomic power generating installation, The Soviet Journal of Atomic Energy 3, 1269 (1957)

work page 1957

[10] [10]

F. L. Curzon and B. Ahlborn, Eﬃciency of a carnot engine at maximum power output, Am. J. Phys. 43, 22 (1975)

work page 1975

[11] [11]

R. S. Berry, P. Salamon, and B. Andresen, eds., Finite-Time Thermodynamics (MDPI - Multidisci- plinary Digital Publishing Institute, 2022)

work page 2022

[12] [12]

De Vos, Eﬃciency of some heat engines at maximum- power conditions, Am

A. De Vos, Eﬃciency of some heat engines at maximum- power conditions, Am. J. Phys. 53, 570 (1985)

work page 1985

[13] [13]

Sahin, A

B. Sahin, A. Kodal, and H. Yavuz, Eﬃciency of a joule-brayton engine at maximum power density, J. Phys. D: Appl. Phys. 28, 1309 (1995)

work page 1995

[14] [14]

Feldmann, E

T. Feldmann, E. Geva, R. Kosloﬀ, and P. Salamon, Heat engines in ﬁnite time governed by master equa- tions, Am. J. Phys. 64, 485 (1996)

work page 1996

[15] [15]

L. Chen, C. Wu, F. Sun, and S. Cao, Heat transfer eﬀects on the net work output and eﬃ- ciency characteristics for an air-standard otto cycle, Energy Conv. Manag. 39, 643 (1998)

work page 1998

[16] [16]

S. C. Kaushik and S. Kumar, Finite time thermody- namic analysis of endoreversible stirling heat engine with regenerative losses, Energy 25, 989 (2000) . 5

work page 2000

[17] [17]

Kosloﬀ, A quantum mechanical open system as a model of a heat engine, J

R. Kosloﬀ, A quantum mechanical open system as a model of a heat engine, J. Chem. Phys. 80, 1625 (1984)

work page 1984

[18] [18]

Van den Broeck, Thermodynamic eﬃciency at max- imum power, Phys

C. Van den Broeck, Thermodynamic eﬃciency at max- imum power, Phys. Rev. Lett. 95, 190602 (2005)

work page 2005

[19] [19]

Schmiedl and U

T. Schmiedl and U. Seifert, Eﬃciency at maximum power: An analytically solvable model for stochastic heat engines, Europhys. Lett. 81, 20003 (2007)

work page 2007

[20] [20]

Z. C. Tu, Eﬃciency at maximum power of feynman’s ratchet as a heat engine, J. Phys. A: Math. Theor. 41, 312003 (2008)

work page 2008

[21] [21]

A. E. Allahverdyan, R. S. Johal, and G. Mahler, Work extremum principle: Structure and function of quantum heat engines, Phys. Rev. E 77, 041118 (2008)

work page 2008

[22] [22]

Esposito, R

M. Esposito, R. Kawai, K. Lindenberg, and C. Van den Broeck, Eﬃciency at maximum power of low-dissipation carnot engines, Phys. Rev. Lett. 105, 150603 (2010)

work page 2010

[23] [23]

Izumida and K

Y. Izumida and K. Okuda, Eﬃciency at maximum power of minimally nonlinear irreversible heat engines, Europhys. Lett. 97, 10004 (2012)

work page 2012

[24] [24]

Sheng and Z

S. Sheng and Z. C. Tu, Constitutive relation for nonlinear response and universality of eﬃciency at maximum power for tight-coupling heat engines, Phys. Rev. E 91, 022136 (2015)

work page 2015

[25] [25]

Chen, C.-P

J.-F. Chen, C.-P. Sun, and H. Dong, Achieve higher eﬃciency at maximum power with ﬁnite-time quantum otto cycle, Phys. Rev. E 100, 062140 (2019)

work page 2019

[26] [26]

Shiraishi, K

N. Shiraishi, K. Saito, and H. Tasaki, Universal trade-oﬀ relation between power and eﬃciency for heat engines, Phys. Rev. Lett. 117, 190601 (2016)

work page 2016

[27] [27]

Chen and Z

L. Chen and Z. Yan, The eﬀect of heat-transfer law on performance of a two-heat-source endoreversible cycle, J. Chem. Phys. 90, 3740 (1989)

work page 1989

[28] [28]

Holubec and A

V. Holubec and A. Ryabov, Maximum eﬃciency of low-dissipation heat engines at arbitrary power, J. Stat. Mech.-Theory Exp. 2016, 073204 (2016)

work page 2016

[29] [29]

Y.-H. Ma, D. Xu, H. Dong, and C.-P. Sun, Universal constraint for eﬃciency and power of a low-dissipation heat engine, Phys. Rev. E 98, 042112 (2018)

work page 2018

[30] [30]

Abiuso and M

P. Abiuso and M. Perarnau-Llobet, Opti- mal Cycles for Low-Dissipation Heat Engines, Phys. Rev. Lett. 124, 110606 (2020)

work page 2020

[31] [31]

Brandner and K

K. Brandner and K. Saito, Thermodynamic Geometry of Microscopic Heat Engines, Phys. Rev. Lett. 124, 040602 (2020)

work page 2020

[32] [32]

Pietzonka and U

P. Pietzonka and U. Seifert, Universal Trade-Oﬀ be- tween Power, Eﬃciency, and Constancy in Steady-State Heat Engines, Phys. Rev. Lett. 120, 190602 (2018)

work page 2018

[33] [33]

Holubec and A

V. Holubec and A. Ryabov, Cycling Tames Power Fluctuations near Optimum Eﬃciency, Phys. Rev. Lett. 121, 120601 (2018)

work page 2018

[34] [34]

H. J. D. Miller, M. H. Mohammady, M. Perarnau- Llobet, and G. Guarnieri, Thermodynamic Uncertainty Relation in Slowly Driven Quantum Heat Engines, Phys. Rev. Lett. 126, 210603 (2021)

work page 2021

[35] [35]

Y.-H. Ma, D. Xu, H. Dong, and C.-P. Sun, Optimal op- erating protocol to achieve eﬃciency at maximum power of heat engines, Phys. Rev. E 98, 022133 (2018)

work page 2018

[36] [36]

Y. H. Chen, J.-F. Chen, Z. Fei, and H. T. Quan, Microscopic theory of the Curzon-Ahlborn heat engine based on a Brownian particle, Phys. Rev. E 106, 024105 (2022)

work page 2022

[37] [37]

Salamon and R

P. Salamon and R. S. Berry, Thermody- namic Length and Dissipated Availability, Phys. Rev. Lett. 51, 1127 (1983)

work page 1983

[38] [38]

G. E. Crooks, Measuring Thermodynamic Length, Phys. Rev. Lett. 99, 100602 (2007)

work page 2007

[39] [39]

D. A. Sivak and G. E. Crooks, Ther- modynamic Metrics and Optimal Paths, Phys. Rev. Lett. 108, 190602 (2012)

work page 2012

[40] [40]

P. R. Zulkowski, D. A. Sivak, G. E. Crooks, and M. R. DeWeese, Geometry of thermodynamic control, Phys. Rev. E 86, 041148 (2012)

work page 2012

[41] [41]

Li and Z

G. Li and Z. Tu, Nonequilibrium work rela- tions meet engineered thermodynamic control: A perspective for nonequilibrium measurements, Europhys. Lett. 142, 61001 (2023)

work page 2023

[42] [42]

Gu´ ery-Odelin, C

D. Gu´ ery-Odelin, C. Jarzynski, C. A. Plata, A. Prados, and E. Trizac, Driving rapidly while remaining in con- trol: Classical shortcuts from Hamiltonian to stochastic dynamics, Rep. Prog. Phys. 86, 035902 (2023)

work page 2023

[43] [43]

Van Vu and Y

T. Van Vu and Y. Hasegawa, Geometrical Bounds of the Irreversibility in Markovian Systems, Phys. Rev. Lett. 126, 010601 (2021)

work page 2021

[44] [44]

Wang and J

Z. Wang and J. Ren, Thermodynamic geometry of nonequilibrium ﬂuctuations in cyclically driven trans- port, Phys. Rev. Lett. 132, 207101 (2024)

work page 2024

[45] [45]

Zhong and M

A. Zhong and M. R. DeWeese, Beyond Lin- ear Response: Equivalence between Thermo- dynamic Geometry and Optimal Transport, Phys. Rev. Lett. 133, 057102 (2024)

work page 2024

[46] [46]

Ma, R.-X

Y.-H. Ma, R.-X. Zhai, J. Chen, C. P. Sun, and H. Dong, Experimental Test of the 1 /τ -Scaling En- tropy Generation in Finite-Time Thermodynamics, Phys. Rev. Lett. 125, 210601 (2020)

work page 2020

[47] [47]

Nakazato and S

M. Nakazato and S. Ito, Geometrical aspects of entropy production in stochastic thermodynamics based on wasserstein distance, Phys. Rev. Res. 3, 043093 (2021)

work page 2021

[48] [48]

Schmiedl and U

T. Schmiedl and U. Seifert, Optimal ﬁnite- time processes in stochastic thermodynamics, Phys. Rev. Lett. 98, 108301 (2007)

work page 2007

[49] [49]

Gomez-Marin, T

A. Gomez-Marin, T. Schmiedl, and U. Seifert, Optimal protocols for minimal work processes in underdamped stochastic thermodynamics, J. Chem. Phys. 129, 024114 (2008)

work page 2008

[50] [50]

Aurell, C

E. Aurell, C. Mej ´ ıa-Monasterio, and P. Muratore- Ginanneschi, Optimal protocols and opti- mal transport in stochastic thermodynamics, Phys. Rev. Lett. 106, 250601 (2011)

work page 2011

[51] [51]

P. R. Zulkowski and M. R. DeWeese, Optimal control of overdamped systems, Phys. Rev. E 92, 032117 (2015)

work page 2015

[52] [52]

M. C. Engel, J. A. Smith, and M. P. Brenner, Optimal control of nonequilibrium systems through automatic diﬀerentiation, Phys. Rev. X 13, 041032 (2023)

work page 2023

[53] [53]

G. Li, H. T. Quan, and Z. C. Tu, Shortcuts to isothermality and nonequilibrium work relations, Phys. Rev. E 96, 012144 (2017)

work page 2017

[54] [54]

Li, J.-F

G. Li, J.-F. Chen, C. P. Sun, and H. Dong, Geodesic Path for the Minimal Energy Cost in Shortcuts to Isothermality, Phys. Rev. Lett. 128, 230603 (2022)

work page 2022

[55] [55]

J. A. C. Albay, P.-Y. Lai, and Y. Jun, Re- alization of ﬁnite-rate isothermal compression and expansion using optical feedback trap, Appl. Phys. Lett. 116, 103706 (2020)

work page 2020

[56] [56]

Chen, Optimizing brownian heat engine with shortcut strategy, Phys

J.-F. Chen, Optimizing brownian heat engine with shortcut strategy, Phys. Rev. E 106, 054108 (2022)

work page 2022

[57] [57]

Zhao, Z.-N

X.-H. Zhao, Z.-N. Gong, and Z. C. Tu, Low-dissipation engines: Microscopic construction via shortcuts to adia- 6 baticity and isothermality, the optimal relation between power and eﬃciency, Phys. Rev. E 106, 064117 (2022)

work page 2022

[58] [58]

R. Dann, A. Tobalina, and R. Kosloﬀ, Short- cut to Equilibration of an Open Quantum System, Phys. Rev. Lett. 122, 250402 (2019)

work page 2019

[59] [59]

Pancotti, M

N. Pancotti, M. Scandi, M. T. Mitchison, and M. Perarnau-Llobet, Speed-Ups to Isothermal- ity: Enhanced Quantum Thermal Machines through Control of the System-Bath Coupling, Phys. Rev. X 10, 031015 (2020)

work page 2020

[60] [60]

Ma, Simple realization of the poly- tropic process with a ﬁnite-sized reservoir, Am

Y.-H. Ma, Simple realization of the poly- tropic process with a ﬁnite-sized reservoir, Am. J. Phys. 91, 555 (2023)

work page 2023

[61] [61]

M. J. Ondrechen, B. Andresen, M. Mozurkewich, and R. S. Berry, Maximum work from a ﬁnite reservoir by sequential Carnot cycles, Am. J. Phys. 49, 681 (1981)

work page 1981

[62] [62]

R. S. Johal and R. Rai, Near-equilibrium uni- versality and bounds on eﬃciency in quasi- static regime with ﬁnite source and sink, Europhys. Lett. 113, 10006 (2016)

work page 2016

[63] [63]

Izumida and K

Y. Izumida and K. Okuda, Work Output and Eﬃ- ciency at Maximum Power of Linear Irreversible Heat Engines Operating with a Finite-Sized Heat Source, Phys. Rev. Lett. 112, 180603 (2014)

work page 2014

[64] [64]

Ma, Eﬀect of Finite-Size Heat Source’s Heat Capacity on the Eﬃciency of Heat Engine, Entropy 22, 1002 (2020)

Y.-H. Ma, Eﬀect of Finite-Size Heat Source’s Heat Capacity on the Eﬃciency of Heat Engine, Entropy 22, 1002 (2020)

work page 2020

[65] [65]

Yuan, Y.-H

H. Yuan, Y.-H. Ma, and C. P. Sun, Optimizing thermodynamic cycles with two ﬁnite-sized reservoirs, Phys. Rev. E 105, L022101 (2022)

work page 2022

[66] [66]

Quan, Maximum eﬃciency of ideal heat engines based on a small system: Correc- tion to the carnot eﬃciency at the nanoscale, Phys

H. Quan, Maximum eﬃciency of ideal heat engines based on a small system: Correc- tion to the carnot eﬃciency at the nanoscale, Phys. Rev. E 89, 062134 (2014)

work page 2014

[67] [67]

Fei and Y.-H

Z. Fei and Y.-H. Ma, Temperature ﬂuctuations in meso- scopic systems, Physical Review E 109, 044101 (2024)

work page 2024

[68] [68]

Niedenzu and G

W. Niedenzu and G. Kurizki, Cooperative many- body enhancement of quantum thermal machine power, New J. Phys. 20, 113038 (2018)

work page 2018

[69] [69]

Vroylandt, M

H. Vroylandt, M. Esposito, and G. Verley, Col- lective eﬀects enhancing power and eﬃciency, Europhys. Lett. 120, 30009 (2018)

work page 2018

[70] [70]

C. L. Latune, I. Sinayskiy, and F. Petruccione, Collective heat capacity for quantum ther- mometry and quantum engine enhancements, New J. Phys. 22, 083049 (2020)

work page 2020

[71] [71]

F. S. Filho, G. A. L. For˜ ao, D. M. Busiello, B. Cleuren, and C. E. Fiore, Powerful ordered collective heat en- gines, Phys. Rev. Res. 5, 043067 (2023)

work page 2023

[72] [72]

Rolandi, P

A. Rolandi, P. Abiuso, and M. Perarnau-Llobet, Col- lective Advantages in Finite-Time Thermodynamics, Phys. Rev. Lett. 131, 210401 (2023)

work page 2023

[73] [73]

Campisi and R

M. Campisi and R. Fazio, The power of a critical heat engine, Nat. Commun. 7, 11895 (2016)

work page 2016

[74] [74]

Holubec and A

V. Holubec and A. Ryabov, Work and power ﬂuctuations in a critical heat engine, Phys. Rev. E 96, 030102 (2017)

work page 2017

[75] [75]

Ma, S.-H

Y.-H. Ma, S.-H. Su, and C.-P. Sun, Quantum ther- modynamic cycle with quantum phase transition, Phys. Rev. E 96, 022143 (2017)

work page 2017

[76] [76]

Liang, Y.-H

S. Liang, Y.-H. Ma, D. M. Busiello, and P. D. L. Rios, A minimal model for carnot eﬃciency at maximum power, arXiv preprint arXiv:2312.02323 10.48550/arXiv.2312.02323 (2023)

work page doi:10.48550/arxiv.2312.02323 2023

[77] [77]

Verley, M

G. Verley, M. Esposito, T. Willaert, and C. Van den Broeck, The unlikely carnot eﬃciency, Nat. commun. 5, 4721 (2014)

work page 2014

[78] [78]

Denzler and E

T. Denzler and E. Lutz, Eﬃciency ﬂuc- tuations of a quantum heat engine, Phys. Rev. Res. 2, 032062 (2020)

work page 2020

[79] [79]

Fei, J.-F

Z. Fei, J.-F. Chen, and Y.-H. Ma, Eﬃ- ciency statistics of a quantum otto cycle, Phys. Rev. A 105, 022609 (2022)

work page 2022

[80] [80]

M. O. Scully, M. S. Zubairy, G. S. Agarwal, and H. Walther, Extracting Work from a Sin- gle Heat Bath via Vanishing Quantum Coherence, Science 299, 862 (2003)

work page 2003