Robotics · arXiv:2610.19604 v1 · submitted 14 Oct 2026 · 38 references
ForceBench: Benchmarking Force Integration for Robotic Manipulation
The paper says
“Force feedback provides vision-language-action (VLA) policies with physical observations that can guide action selection and execution. However, differences in tasks, demonstrations, and control settings across existing systems hinder reliable comparisons of force integration designs.”
more of the abstract
We introduce ForceBench, a simulation benchmark for evaluating six-axis wrist-force integration under a unified protocol. ForceBench combines eight tasks spanning physical-property inference, resistance-dependent interaction, and contact-rich assembly with 1,600 synchronized demonstrations and task-specific success criteria. We compare one no-force baseline and six force integration designs on a shared π0.5 backbone. Prompt Fusion achieves the highest observed mean simulation success of 35.31%, compared with 23.25% for the baseline, and improves success rates across all three task categories. Predictive and temporal gains in simulation concentrate on physical-property inference, while both temporal designs underperform the baseline on assembly. Real-world evaluation of eight systems across five tasks supports the main qualitative trends: Prompt Fusion and Dual-Path Fusion achieve 63.00% mean success, compared with 40.00% for the baseline, but only Prompt Fusion improves every task. These findings support ForceBench's practical value for identifying the benefits and limitations of force integration across manipulation demands. The project page is available at https://forcebench-platform.github.io/.
from the abstract
Pith says
Machine review · deepseek-v4-flash · 15 Oct 2026 · what was read was not recorded · not checked by a person
It can be wrong. Challenge this review or reply to it.
Holds up. ForceBench delivers a much-needed standard for comparing force integration in VLA models, with honest reporting and clear limitations. This line is wrong
3 major objections · 5 minor
How often objections from reviews like this one are right: not yet measured
Not checked: figures, code, what the 38 references say.
The paper says, at §V-A and Appendix C
The review did not quote this passage.
A classifier read this sentence of the paper as acknowledging the concern (probability 0.94):
“They also do not quantify variability across independently trained policies.”
Pith says: Objection 1 of 3 · major
Central comparisons (e.g., 'Prompt Fusion achieves the highest observed mean success') are based on a single training run per method. The paper acknowledges that aggregate counts do not quantify variability across independently trained policies (Appendix C). Without multiple training seeds (typically 3–5 for this class of benchmarks), it is impossible to assess whether observed performance differences (e.g., the 12.06 percentage-point gap over baseline, or the 0.19 percentage-point gap between Prompt Fusion and Dual-Path Fusion) are robust to random initialization.
more of objection 1
The authors should either report variance over multiple seeds or, at minimum, state clearly in the abstract and conclusion that these are point estimates from one run each, not statistically validated comparisons.
The paper says, at §IV and Appendix B
The review did not quote this passage.
A classifier read this sentence of the paper as acknowledging the concern (probability 0.93):
“Input placement, normalization, and model capacity vary across the designs; consequently, the comparison should not be interpreted as changing only a single insertion location.”
Pith says: Objection 2 of 3 · major
The force integration designs differ in multiple confounded factors: input representation (continuous tokens vs. discretized numerical features), normalization (quantile normalization vs. clipping to [-5,5]), model capacity (Token Fusion adds six 1024-d tokens; Cross-Attention adds six tokens with an eight-head attention module; Temporal Prompt adds no parameters; Dual-Path adds an MLP pathway), and insertion location.
more of objection 2
The paper acknowledges this in Appendix B ('the comparison should not be interpreted as changing only a single insertion location'), but then draws mechanistic conclusions in §V-C (e.g., 'force encoding should match the backbone's conditioning pathway'). These conclusions are not supported by the data because the observed differences could be due to capacity, normalization, or other factors. The authors should either add a controlled ablation (e.g., force tokens in prompt vs. suffix with identical encoding) or substantially weaken the mechanistic claims.
The paper says, at Abstract and §III-B
The review did not quote this passage.
A classifier read this sentence of the paper as acknowledging the concern (probability 0.97):
“The assembly category has one task, so its category-level result should not be generalized to all assembly problems.”
Pith says: Objection 3 of 3 · major
The abstract states that Prompt Fusion 'improves success rates across all three task categories.' However, the assembly category contains only one task (Nut Thread). As the paper itself notes in Appendix C, 'the assembly category has one task, so its category-level result should not be generalized to all assembly problems.'
more of objection 3
The category-level claim in the abstract and main text should be qualified to reflect this limited support, e.g., 'improves on the single assembly task tested' rather than asserting a category-level generalization. The real-world evaluation includes only one assembly task (Block Insert, 20 trials per method) and shows that temporal designs underperform the baseline there, further limiting the generality of the assembly improvement claim.
5 minor objections
The paper says, at Appendix C (Equation 7)
Pith says: minor objection 1 of 5
The formula for the category mean weights tasks equally, but the categories contain 2, 5, and 1 task respectively. This means the 'overall mean' is dominated by resistance-dependent interaction (5 tasks). The paper already notes this weighting in Appendix C, but the abstract and main text could briefly remind readers that the overall mean is not a balanced average across categories.
The paper says, at Figure 4
Pith says: minor objection 2 of 5
Panel (h) uses an ellipsis ('...') on the symmetric-log axis to skip tick labels; this is nonstandard and could confuse readers. Consider using a standard symmetric-log scale with clear tick marks for the full range. Also, the label 'Descending nut at 35 mm height' is partially cut off; ensure the figure is legible at print resolution.
This objection may describe the copy Pith gave the reviewer, not the paper.
show 3 more
The paper says, at §V-E and Table II
Pith says: minor objection 3 of 5
The real-world study uses only 20 trials per task–method pair. The paper correctly states that it supports 'qualitative comparisons,' but this small sample size should be mentioned more prominently—perhaps in the table caption—so readers are not misled by apparent percentage differences of 5–15 percentage points.
The paper says, at Appendix B (Equation 3)
Pith says: minor objection 4 of 5
The quantile normalization uses q_{0.01,j} and q_{0.99,j}. It should be stated whether these quantiles are computed from the training demonstrations, from all episodes, or from some held-out set. Without that detail, the normalization procedure is not fully reproducible.
The paper says, at General
Pith says: minor objection 5 of 5
The paper uses the phrase 'highest observed' throughout, which is appropriate given the lack of statistical tests. However, a few early occurrences (e.g., in the abstract 'achieves the highest observed mean simulation success') could be misinterpreted as absolute claims by a casual reader. Consider adding a brief footnote or parenthetical remark about 'point estimate from one training run' the first time the phrase appears.
What would settle it
Add two more contact-rich assembly tasks to the simulation benchmark (e.g., peg-in-hole with interference, snap-fit, or gear mesh), retrain the seven π0.5 configurations on all three assembly tasks, and compare Prompt Fusion's success rate against the no-force baseline on each. If Prompt Fusion does not outperform the baseline on at least two of the three tasks, the category-level claim of assembly improvement is unsupported.
from the skeptic's reading
How the review went
4 readings by deepseek-v4-flash · 15 Oct 2026
- Reader holds up
- Skeptic agrees
- Editor wrote the verdict above
- Referee minor revision: 3 major objections, 5 minor
Not run on this paper: the simulated authors' defence.
Pith did not check this review's objections against the paper.
The review in full
The review in brief, machine-written
ForceBench is a solid, much-needed benchmark for comparing six-axis wrist-force integration in VLA policies. Its main contribution is a unified protocol across eight tasks with 1,600 demonstrations and a systematic comparison of six integration designs on a shared π0.5 backbone. The methodology is rigorous: shared seeds, 200 episodes per task-method pair, real-world validation with 800 trials, and careful reporting of task-specific success criteria. The authors are also transparent about their limitations—single backbone, one assembly task, no significance tests—which earns trust.
The real strength is that the paper doesn't just report aggregate success; it breaks down results by task category and analyzes failure modes, revealing that different force integration designs have different tradeoffs. That's the kind of insight a good benchmark should produce.
Now the soft spots. The claim that Prompt Fusion improves all three task categories relies on a single assembly task (Nut Thread). The paper acknowledges this in Appendix C, but the abstract and introduction still present it as a category-level result. Readers should treat the assembly finding as preliminary. With only one assembly task, it's impossible to know whether the benefit generalizes. The real-world Block Insert results, where temporal designs underperform the baseline, don't undermine Prompt Fusion's own performance, but they don't help either. So the category-level claim should be tempered.
Also, the difference between the top two methods in simulation is just three episodes out of 1,600—the paper calls this out, but some readers might miss it. The value is in the tradeoffs, not in naming a winner.
Conclusion: this is a useful resource for anyone comparing force integration or benchmarking VLA policies. It deserves peer review and publication with minor revisions. The main revision: tone down the assembly category claim in the abstract and introduction.
The strongest objection
The central claim that Prompt Fusion 'improves all three task categories' relies on a single assembly task (Nut Thread). The paper itself notes that 'The assembly category has one task, so its category-level result should not be generalized to all assembly problems' (Appendix C). However, the claim is still presented as a category-level result. With only one assembly task, the performance difference (34.00% vs. 31.50% baseline) could be task-specific rather than general to contact-rich assembly. The real-world evaluation includes one assembly task (Block Insert) with 20 trials per method, where temporal designs underperform the baseline, further limiting support for a robust assembly improvement claim. Therefore, the assertion that Prompt Fusion improves the assembly category is not reliably supported.
The reader's weakest_assumption identified the same limitation about task coverage and generalization. The paper is transparent about the single assembly task limitation and does not over-claim statistical significance. The benchmark remains a valuable contribution for comparing force integration designs across physical-property inference and resistance-dependent interaction, even if the assembly category result is tentative. Therefore, the existing ACCEPT verdict is not undermined; the concern is noted but does not change the overall assessment.
The referee's report
If adopted by the community, ForceBench could serve as a standardized testbed for comparing force integration methods in VLA manipulation, an area that currently lacks unified evaluation. The benchmark's strengths include a shared observation–action interface, seeded reproducibility, task-specific success criteria that separate physical decisions from execution, and a real-world validation component. The comparative study systematically documents that different force representations produce task-dependent tradeoffs—temporal statistics benefit property inference but degrade assembly performance—a finding that is practically useful for design choices. The paper is transparent about its limitations (single training run per method, single assembly task, confounded design factors), which helps readers calibrate their interpretation of the results.
Pith's reading of the paper (a machine's summary, not the authors')
ForceBench provides a unified simulation benchmark for comparing how six-axis wrist-force measurements are integrated into vision-language-action (VLA) models. By holding tasks, demonstrations, and control settings constant across eight manipulation tasks (physical-property inference, resistance-dependent interaction, and contact-rich assembly), the authors isolate the effect of force integration design. They find that Prompt Fusion—appending the current force to the robot state and discretizing it into numerical tokens used by the language pathway—achieves the highest mean success (35.31% vs. 23.25% baseline in simulation) and improves every task category. Temporal force representations (mean and standard deviation over a short window) excel at inferring hidden physical properties like mass and center of mass, but consistently underperform the baseline on the assembly task Nut Thread. The same qualitative pattern holds in real-world transfer experiments. These results suggest that no single force integration design is universally best; the design should match both the backbone's conditioning pathway and the physical persistence of the relevant cues.
What carries the argument. The central objects are six force-integration designs built on the $\pi_{0.5}$ VLA backbone: (1) Token Fusion (force tokens in action suffix), (2) Prompt Fusion (force discretized as numerical tokens in prompt), (3) Cross-Attention (force tokens attend to action output), (4) Token Fusion + Pred (adds future-force prediction loss), (5) Temporal Prompt (window statistics added to prompt), and (6) Dual-Path Fusion (temporal statistics both in prompt and as token path). The framework uses a shaed 1,600-episode expert demo set and seeded evaluation (identical task-instance seeds for all methods) to isolate the effect of force representation from confounds like task difficulty or training budget.
Core claim. The paper establishes that, on a shared VLA backbone ($\pi_{0.5}$), the way force is encoded and inserted into the model architecture strongly determines task-specific success. The best overall approach, Prompt Fusion, feeds force as 256-bin-discretized numerical tokens appended to the proprioceptive state in the prompt, reusing the model's numerical conditioning path. It achieves the highest mean success in simulation (35.31%, +12.06 pp over no-force) and is the only design that improves all three task categories (physical, resistance, assembly) in both simulation and real-world tests. In contrast, temporal designs that summarize a 16-sample window into statistics (Temporal Prompt, Dual-Path Fusion) outperform Prompt Fusion on physical-property inference (e.g., 90.0% vs. 88.0% on Weight Sort in sim) but drop below the no-force baseline on assembly (e.g., 22.0% vs. 31.5% on Nut Thread for Temporal Prompt). Adding future-force prediction as auxiliary training loss also improves overall success (26.25% vs. 23.56% for current-only Token Fusion), but gains concentrate on physical tasks.
The premise it rests on. The benchmark's eight tasks—particularly the single assembly task 'Nut Thread'—are representative enough of real-world manipulation demands across all three categories that the observed ranking of force-integration designs will hold in broader settings and with more diverse tasks.
If the paper is right (Pith's inferences, not the authors')
For contact-rich assembly tasks like nut threading, current-sample force conditioning (e.g., Prompt Fusio) is preferrable to temporal summaries that appear to wash out transient contact cues.
For tasks where hidden physical properties (mass, center of mass) must be inferred through motion, temporal force statistics offer a consistent advantage over single-shot readings.
The fact that Prompt Fusio improves all tasks in both sim and real suggests that aligning the force representation with the backbone's pretrained conditioning pathway (numerical prompt) reduces the adaptation cost and yields more robust gains.
The small overall performance gap between Prompt Fusion and Dual-Path Fusion in simulation (35.31% vs. 35.13%) conceals stark task tradeoffs: Dual-Path gains +36 pp on Weight Sort but loses -15 pp on Nut Thread, urging category-level reporting in future benchmarks.
Future-force prediction as auxiliary training improves Weight Sort success but not assembly, indicating that predictive targets may be beneficial only when the task has a clear physical pending signature detectable from current context.
Because ForceBench's contact-rich category contains only one task (Nut Thread), the claim that temporal designs 'underperform the baseline on assembly' is tentative and may not generalize to other assembly problems (e.g., peg insertion, gear meshing). The authors acknowledge this single-task limitation in Appendix C.
The real-world evaluation used only 20 trials per task–method, so the 'only Prompt Fusion improves every task' claim is based on small samples and should be verified with larger-scale deployment studies.
The design comparison is not a controlled ablation: input placement, normalization, and model capacity differ across methods (as the authors note). The observed performance differences may partially reflect these confounds rather than the representation format alone.
ForceBench's seeded evaluation and open-sourced expert datasets could become a standardized testbed for future force-integration research, much as RLBench did for vision-based manipulation, provided that the task roster is expanded to include more assembly and deformable-object scenarios.
Check this review
Pith stored no record of this review's passes and took no fingerprint of it. Reviews made by code from 13 Nov 2026 on carry both.
How often reviews like this one are right
Reviews like this one: written by deepseek-v4-flash, where what was read was not recorded.
How often objections from reviews like this one are right: not yet measured
Reviews by people
This review was written by a machine. No person has reviewed this paper on Pith yet. A scientist listed on Pith can review it for a fee, and their review is published here whatever it concludes.
The paper
Abstract
Force feedback provides vision-language-action (VLA) policies with physical observations that can guide action selection and execution. However, differences in tasks, demonstrations, and control settings across existing systems hinder reliable comparisons of force integration designs. We introduce ForceBench, a simulation benchmark for evaluating six-axis wrist-force integration under a unified protocol. ForceBench combines eight tasks spanning physical-property inference, resistance-dependent interaction, and contact-rich assembly with 1,600 synchronized demonstrations and task-specific success criteria. We compare one no-force baseline and six force integration designs on a shared π0.5 backbone. Prompt Fusion achieves the highest observed mean simulation success of 35.31%, compared with 23.25% for the baseline, and improves success rates across all three task categories. Predictive and temporal gains in simulation concentrate on physical-property inference, while both temporal designs underperform the baseline on assembly. Real-world evaluation of eight systems across five tasks supports the main qualitative trends: Prompt Fusion and Dual-Path Fusion achieve 63.00% mean success, compared with 40.00% for the baseline, but only Prompt Fusion improves every task. These findings support ForceBench's practical value for identifying the benefits and limitations of force integration across manipulation demands. The project page is available at https://forcebench-platform.github.io/.
The paper's own sentences, arranged, kept beside the review and separate from it. Each label is drawn from a closed vocabulary; the number beside it is the probability the classifier gave that label. No sentence in this record was written by a model.
abstract compiled · 2026-10-15
The authors' main claim, as the classifier picked it out 0.68
“These findings support ForceBench's practical value for identifying the benefits and limitations of force integration across manipulation demands.”
How the main claim is stated: asserted 0.59
What the abstract itself states, as probabilities: claims first 0.09 · states limitation 0.50 · human participants 0.05 · controlled comparison 0.98 · randomized assignment 0.02 · states quantitative result 0.99 · compares with prior results 0.96 · mentions code or data availability 0.63
The abstract, sentence by sentence
This table labels the abstract only (arXiv listing abstract v1). The number is the probability the classifier gave the label.
| Sentence | Role | The authors' own work | States the main conclusion | Strength |
|---|---|---|---|---|
| Force feedback provides vision-language-action (VLA) policies with physical observations that can guide action selection and execution. | background 1.00 | 0.06 | 0.02 | asserted 0.81 |
| However, differences in tasks, demonstrations, and control settings across existing systems hinder reliable comparisons of force integration designs. | gap 0.90 | 0.07 | 0.02 | asserted 1.00 |
| We introduce ForceBench, a simulation benchmark for evaluating six-axis wrist-force integration under a unified protocol. | contribution 0.99 | 0.91 | 0.04 | asserted 1.00 |
| ForceBench combines eight tasks spanning physical-property inference, resistance-dependent interaction, and contact-rich assembly with 1,600 synchronized demonstrations and task-specific success criteria. | method 0.82 | 0.92 | 0.04 | asserted 1.00 |
| We compare one no-force baseline and six force integration designs on a shared $\pi_{0.5}$ backbone. | method 0.93 | 0.94 | 0.03 | asserted 0.99 |
| Prompt Fusion achieves the highest observed mean simulation success of 35.31%, compared with 23.25% for the baseline, and improves success rates across all three task categories. | result 1.00 | 0.96 | 0.41 | asserted 1.00 |
| Predictive and temporal gains in simulation concentrate on physical-property inference, while both temporal designs underperform the baseline on assembly. | result 0.92 | 0.93 | 0.09 | asserted 1.00 |
| Real-world evaluation of eight systems across five tasks supports the main qualitative trends: Prompt Fusion and Dual-Path Fusion achieve 63.00% mean success, compared with 40.00% for the baseline, but only Prompt Fusion improves every task. | result 1.00 | 0.96 | 0.31 | asserted 0.99 |
| These findings support ForceBench's practical value for identifying the benefits and limitations of force integration across manipulation demands. | interpretation 1.00 | 0.66 | 0.46 | asserted 0.59 |
| The project page is available at https://forcebench-platform.github.io/. | future work 0.48 | 0.15 | 0.02 | asserted 0.84 |
What kind of paper the classifier reports this is: dataset or benchmark 1.00 · evidence from observation or experiment 0.62
What was examined, and what was not
Sources read
- arXiv listing abstract v1
Not examined
- full text
- figures and tables
- references and citing sentences
- relations to other papers
Levels run
- P abstract
Not run
- S sections
- T body sentences
- C citations
- R cross-paper relations
How the labels were made
Compiled by classifier-1.13.0 via TypeSafe API, question bank abstract-p1-20260923, 2026-10-15: 1 request, 7,518 input tokens.
Every quoted sentence on this record is the authors'. Every label is from Pith's closed vocabulary, with the probability shown beside it. This record as JSON
Figures (8)
Figures are the authors', reproduced from the paper.
References (38)
- [1] M. J. Kim, K. Pertsch, S. Karamchetiet al., “OpenVLA: An Open- Source Vision-Language-Action Model,” 2024. [Online]. Available: https://arxiv.org/abs/2406.09246 on PithPith's reviewarXiv
- [2] K. Black, N. Brown, D. Driesset al., “ π0: A Vision-Language-Action Flow Model for General Robot Control,” 2024. [Online]. Available: https://arxiv.org/abs/2410.24164 on PithPith's reviewarXiv
- [3] Physical Intelligence, K. Black, N. Brownet al., “ π0.5: a Vision- Language-Action Model with Open-World Generalization,” 2025. [Online]. Available: https://arxiv.org/abs/2504.16054 on PithPith's reviewarXiv
- [4] M. J. Kim, C. Finn, and P. Liang, “Fine-tuning vision-language-action models: Optimizing speed and success,” inRobotics: Science and Systems, 2025, arXiv:2502.19645 on PithPith's reviewarXiv
- [5] C. Chi, Z. Xu, S. Fenget al., “Diffusion Policy: Visuomotor Policy Learning via Action Diffusion,” 2023. [Online]. Available: https://arxiv.org/abs/2303.04137 on PithPith's reviewarXiv
- [6] Y . Hou, Z. Liu, C. Chiet al., “Adaptive Compliance Policy: Learning Approximate Compliance for Diffusion Guided Control,” on Pith
- [7] J. J. Liu, Y . Li, K. Shaw, T. Tao, R. Salakhutdinov, and D. Pathak, “FACTR: Force-Attending Curriculum Training for Contact-Rich Policy Learning,” 2025. [Online]. Available: https://arxiv.org/abs/2502.17432 on PithPith's reviewarXiv
- [8] H. Xue, J. Ren, W. Chenet al., “Reactive Diffusion Policy: Slow-Fast Visual-Tactile Policy Learning for Contact-Rich Manipulation,” 2025. [Online]. Available: https://arxiv.org/abs/2503.02881 on PithPith's reviewarXiv
- [9] J. Yu, H. Liu, Q. Yuet al., “ForceVLA: Enhancing VLA Models with a Force-aware MoE for Contact-rich Manipulation,” 2025. [Online]. Available: https://arxiv.org/abs/2505.22159 on PitharXiv
- [10] Y . Li, P. Tang, W. Zhanget al., “FA VLA: A Force-Adaptive Fast-Slow VLA model for Contact-Rich Robotic Manipulation,” 2026. [Online]. Available: https://arxiv.org/abs/2602.23648 on PitharXiv
- [11] M. Wang, Z. Yue, R. Luet al., “PhaForce: Phase-Scheduled Visual-Force Policy Learning with Slow Planning and Fast Correction for Contact-Rich Manipulation,” 2026. [Online]. Available: https://arxiv.org/abs/2603.08342 on PitharXiv
- [12] Z. He, H. Fang, J. Chen, H.-S. Fang, and C. Lu, “FoAR: Force-Aware Reactive Policy for Contact-Rich Robotic Manipulation,” 2024. [Online]. Available: https://arxiv.org/abs/2411.15753 on PithPith's reviewarXiv
- [13] H. Deng, H. Liu, W. Guoet al., “Facet-0: A Robotic Foundation Model for Contact-Rich Precise Manipulation,” 2026. [Online]. Available: https://arxiv.org/abs/2609.01596 on PithPith's reviewarXiv
- [14] R. Zhao, W. Wang, Y . Maet al., “FD-VLA: Force-Distilled Vision-Language-Action Model for Contact-Rich Manipulation,” 2026. [Online]. Available: https://arxiv.org/abs/2602.02142 on PitharXiv
- [15] H. Fang, S. Li, S. Wang, X. Xi, D. Liang, and X. Bai, “Towards gener- alizable robotic manipulation in dynamic environments,” inEuropean Conference on Computer Vision (ECCV), 2026, arXiv:2603.15620 on PithPith's reviewarXiv
- [16] Z. Lan, Y . Jiang, R. Wanget al., “AutoBio: A Simulation and Benchmark for Robotic Automation in Digital Biology Laboratory,” on Pith
- [17] J. Huang, S. Wang, F. Lin, Y . Hu, C. Wen, and Y . Gao, “Tactile-VLA: Unlocking Vision-Language-Action Model’s Physical Knowledge for Tactile Generalization,” 2025. [Online]. Available: https://arxiv.org/abs/2507.09160 on PithPith's reviewarXiv
- [18] Y . Li, Zhaxizhuoma, H. Jianget al., “ForceVLA2: Unleashing Hybrid Force-Position Control with Force Awareness for Contact-Rich Manipulation,” 2026. [Online]. Available: https://arxiv.org/abs/2603. 15169 on Pith
- [19] G. Lee, Y . Lee, K. Kimet al., “ManipForce: Force-Guided Policy Learning with Frequency-Aware Representation for Contact-Rich Manipulation,” 2025. [Online]. Available: https://arxiv.org/abs/2509. 19047 on Pith
- [20] Z. Zhang, H. Xu, Z. Yanget al., “TA-VLA: Elucidating the Design Space of Torque-aware Vision-Language-Action Models,” 2025. [Online]. Available: https://arxiv.org/abs/2509.07962 on PithPith's reviewarXiv
show 18 more
- [21] S. Zhang, Y . Yuan, H. Tanget al., “ForceFlow: Learning to Feel and Act via Contact-Driven Flow Matching,” 2026. [Online]. Available: https://arxiv.org/abs/2605.11048 on PithPith's reviewarXiv
- [22] J. Lee, H. Jang, M. Koo, J. Park, and J. Shin, “Modular Sensory Stream for Integrating Physical Feedback in Vision-Language-Action Models,” 2026. [Online]. Available: https://arxiv.org/abs/2604.23272 on PithPith's reviewarXiv
- [23] H. He, Z. Yan, Q. Liu, N. Guo, and W. Lian, “FAW AM: Force-Aware World Action Models for Closed-Loop Contact-Rich Manipulation,” on Pith
- [24] W. Liu, J. Wang, Y . Wang, W. Wang, and C. Lu, “ForceMimic: Force-Centric Imitation Learning with Force-Motion Capture System for Contact-Rich Manipulation,” 2024. [Online]. Available: https://arxiv.org/abs/2410.07554 on PithPith's reviewarXiv
- [25] Y . Lou, Y . Ye, Y . Fuet al., “Dream-Tac: A Unified Tactile World Action Model for Contact-Rich Robot Manipulation,” 2026. [Online]. Available: https://arxiv.org/abs/2606.08737 on PithPith's reviewarXiv
- [26] Z. Zhang, P. Zhou, K. Zhanget al., “ContactWorld: What Representations Matter in Vision-Tactile World Models for Contact- Rich Manipulation,” 2026. [Online]. Available: https://arxiv.org/abs/ 2606.13877 on PithPith's reviewarXiv
- [27] S. James, Z. Ma, D. R. Arrojo, and A. J. Davison, “RLBench: The Robot Learning Benchmark & Learning Environment,” 2019. [Online]. Available: https://arxiv.org/abs/1909.12271 on PithPith's reviewarXiv
- [28] T. Yu, D. Quillen, Z. Heet al., “Meta-World: A Benchmark and Evaluation for Multi-Task and Meta Reinforcement Learning,” 2019. [Online]. Available: https://arxiv.org/abs/1910.10897 on PithPith's reviewarXiv
- [29] O. Mees, L. Hermann, E. Rosete-Beas, and W. Burgard, “CALVIN: A benchmark for language-conditioned policy learning for long-horizon robot manipulation tasks,”IEEE Robotics and Automation Letters, 2022, arXiv:2112.03227 on PithPith's reviewarXiv
- [30] B. Liu, Y . Zhu, C. Gaoet al., “LIBERO: Benchmarking knowledge transfer for lifelong robot learning,” inAdvances in Neural Information Processing Systems (NeurIPS), Datasets and Benchmarks Track, 2023, arXiv:2306.03310 on PithPith's reviewarXiv
- [31] S. Nasiriany, A. Maddukuri, L. Zhanget al., “RoboCasa: Large-Scale Simulation of Everyday Tasks for Generalist Robots,” 2024. [Online]. Available: https://arxiv.org/abs/2406.02523 on PithPith's reviewarXiv
- [32] T. Chen, Z. Chen, B. Chenet al., “RoboTwin 2.0: A Scalable Data Generator and Benchmark with Strong Domain Randomization for Robust Bimanual Robotic Manipulation,” 2025. [Online]. Available: https://arxiv.org/abs/2506.18088 on PithPith's reviewarXiv
- [33] X. Li, K. Hsu, J. Guet al., “Evaluating Real-World Robot Manipulation Policies in Simulation,” 2024. [Online]. Available: https://arxiv.org/abs/2405.05941 on PithPith's reviewarXiv
- [34] B. Chen, W. Wan, T. Chenet al., “UniVTAC: A Unified Simulation Platform for Visuo-Tactile Manipulation Data Generation, Learning, and Benchmarking,” 2026. [Online]. Available: https: //arxiv.org/abs/2602.10093 on PitharXiv
- [35] M. Mittal, C. Yu, Q. Yuet al., “Orbit: A unified simulation framework for interactive robot learning environments,”IEEE Robotics and Au- tomation Letters, vol. 8, no. 6, pp. 3740–3747, 2023, the framework is now distributed as NVIDIA Isaac Lab. APPENDIXA SIMULATIONPROTOCOL AND... on Pith
- [2024] [Online]. Available: https://arxiv.org/abs/2410.09309 on PithPith's reviewarXiv
- [2025] [Online]. Available: https://arxiv.org/abs/2505.14030 on PithPith's reviewarXiv
- [2026] [Online]. Available: https://arxiv.org/abs/2606.08555 on PithPith's reviewarXiv
Cited by 1 Pith paper
Reviewed papers on Pith that cite this one. The full citation record
Challenges and discussion
Disagree with the review, or know something it missed? Leave a comment, or challenge this review formally: a challenge becomes a permanent entry in this paper's record, and its decision is published here.
Come back by email
A short list of the week's newly reviewed papers. Nothing is sent until you confirm from your inbox, and every email has a link that stops it. No account.
No comments yet.
Sign in to comment